Top Tubular Cable Lugs

Exell Battery 4 Gauge Interconnecting Copper Cable, 6-Inch Length with 5/16-Inch Lugs (Black)

  • HIGH-QUALITY CABLE: This fine-stranded cable has a voltage of 600V and is rated for MTW/THW/AWM. It is also sunlight resistant, can be buried underground, and can handle temperatures up to 105°C (221°F)..
  • ZINC-PLATED COPPER LUGS: The copper lugs on either side of the cable measure 3/8" and have an extremely low coefficient of thermal expansion, which can help lower the risk of fire hazards during connection..
  • MULTIPURPOSE HOOKUPS: This durable connection cable can be used to connect battery banks or cells for products like backup grids, RV hookups, golf carts, emergency systems, solar-powered devices, and much more..
  • HIGH-QUALITY PLASTIC COATING: The cables' outside coating is double crimped to insulate the copper lugs and compression terminals. When heated, the tubing shrinks, which can protect the wires against corrosion and moisture..
  • FLEXIBLE DESIGN: If you lack the room to stretch out the cable between two connections, this cable is flexible enough to accommodate the amount of space you need without causing much wear on the cable's wires or its outer shell..
Check Stock

LAWUZA 6 AWG Gauge Battery Inverter Cables, 2 Foot Pure Copper Power Wire for Vehicles Solar Marine RV Car Boat, Red + Black Set, 3/8 in Lugs

  • Pure Copper: Our vehicle battery cables are made of pure electrolytic copper, 100 percent fine stranded pure copper cable for high amperage application..
  • Heavy Duty Flexible Cable: 6 gauge battery cable lugs are tinned coated and utilize a closed end design for corrosion protection and professionally cut and crimped..
  • Copper cable is PVC insulation, oil and fuel resistant, sealed lugs and adhesive lined heat shrink creates a completely sealed battery cable to prevent corrosion..
  • Battery bank cables are perform in various applications including cars, automotive, trucks, RV, Solar, also great use as power inverter cables, RV battery cables, marine battery cables grounding cables..
  • 2 Pack set , 2 foot length black + red positive and negative battery cable with 3/8 in tinned lugs, 6 AWG gauge, heat-resistant..
Check Stock

Battery Cable Crimping Tool Battery End Crimper Lug Crimper Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs with Wire Shear Cutter, Crimping Tool 4AWG by BOOTOP PIN

  • 【Applications】Battery Cable Crimping Tool, battery cable lug crimper is designed to crimp 8, 6, 4, 2, 1, 1/0AWG battery lugs, making secure connection with cables, electrical appliances, and other power mechanisms in harsh-duty environments. Cable lugs can be found on the wiring systems of automobiles, electrical boxes, panels, generators, transformers, many durable goods, and for all electrical lugs appliances..
  • 【ROTATE CRIMP DIES,EASY OPERATION 】Compact rotation die for effortless die changing.The professional cable terminal crimping tool has 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (Similar to AWG 8，6，4，2，1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place. Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • 【High Quality,ERGONOMIC DESIGN】Battery lug crimping tool made of high quality carbon steel which can offer long service life. Hexagonal rotating dies of Lug Crimper Tool are processed with Wire EDM Cutting, more accurate than normal casting dies. Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. The handle....
Check Stock

AIRIC 6 Gauge Wire Lugs 5/16' Stud (M8) 10pcs UL Heavy Duty Cable Lugs 6 AWG 5/16' Stud Cable Ends Tinned Copper Tubular Lugs Ring Terminal Connectors DIN 46235

  • ★ Designed for durability: 6 AWG 5/16" stud battery cable lugs are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.
  • ★ UL and DIN 46235 Approved: ring terminals lugs are UL Approved, comply with all relevant European standards. It's in compliance with ROHS directive standards. Meet DIN 46235 standards. Wire can be crimped or soldered to copper lugs, safer, design the fixed close-end structure with stub to ensure connection reliability.
  • ★ High Quality: To provide a high degree of conductivity for maximum current flow, All copper wire lugs terminals are made of T2 copper with 100% anneal. The bright tin-plated surface for corrosion protection.
  • ★ Easy to Install: The AWG wire size and stud size are stamped on the wire lugs, enables universal use with one stud / screw to fix on equipment.
  • ★ Wide Usage: These battery cable lugs are safe and reliable, great for distribution boxes, marines, golf carts, solar panels, home applications, etc..
Check Stock

TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 80Pcs Battery Cable Lugs Battery Cable Ends Ring Terminals Connectors with 80Pcs Heat Shrink Tubing Assortment Kit

  • 【What You Get:】In this set, we offer 10types 80Pcs of AWG 2 4 6 8 10/12 ring terminals copper lugs battery cable ends open end termination ring terminals with 80 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing for your work which meet your different needs..
  • 【Design High Quality:】 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.Can be Crimped or Soldered.inspection window design allows visual inspection of proper wire insertion.All the 3:1 shrink tube is well made of high quality material, thick and durable.They are for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable..
  • 【Reliable and Easy to Use:】All the cable lugs are common size which meet the US standard. Terminals with heavy duty construction improves high temperature durability and ensure connection reliability.
  • high standard flared opening for easy wire insertion. Meanwhile, these battery lugs can be crimped or soldered to the wire cable ends depending on your preference..
  • 【Wide Applications:】 These battery cable wire lugs are ideal u....
Check Stock

SVAAR 10pcs 2/0 AWG-3/8”Ring Terminal Cable lug Wire lug Battery Cable Ends Crimp Wire Connector Copper Eyelets Terminal Connector 00 Gauge UL Listed Heavy Duty Battery Lug with 3:1 Heat Shrink Tubing

  • 【Pure Copper Material】Cable lugs are made of purple copper with strong durability ,99.9% purple copper structure achieved excellent conductivity,battery lugs are generally suitable for use with 2/0 or 00 gauge Wire & 3/8" Eye (Stud)..
  • 【Closed-end Designed】These copper ring terminals have a closed end designed,that makes it possible for cables to stay dry and corrosion free.can be connected by crimping and soldering..
  • 【Come with 3:1 Heat Shrink Tubing】00 Gauge Copper lugs come with 3:1 dual wall adhesive heat shrink tubings(5 black+ 5 red),good insulation and sealing effect to keep the cable dry and extend the service life..
  • 【Widely Application】2/0AWGx3/8" wire lugs widely used in household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment..
  • 【Package Includes】 10pcs 2/0 Gauge 3/8" ring copper lugs&10 pcs 3:1 adhesive Lined heat shrink tubings,UL tested &approved ,Please contact us promptly if you have any questions about this lugs..
Check Stock

HerMia 20 Pack UL Heavy Duty Wire Lugs 1/0 AWG-1/2 1/0 AWG-3/8 Tubular Ring Terminals Connectors Battery Cable Ends Bare Copper Eyelets with 3 1 Dual Wall Adhesive Heat Shrink

  • Battery cable ends kits: 10pcs 1/0 AWG-1/2" copper Wire Lugs and 10pcs 1/0 AWG-3/8" copper Wire Lugs, 20pcs 3:1 heat shrink tubes (10 black and 10....
  • High Quality -- These battery lugs are made from 99.9% heavy duty T2 purple copper, which has excellent electrical conductivity and corrosion....
  • Closed-end Designed -- These copper ring terminals with UL standards are designed with closed ends to keep the cables dry and corrosion-free..
  • Wide Applications -- These 0 gauge wire connector are great for inverters, battery and automotive applications. Widely used in household appliances,....
  • Easy to Use -- These copper cable ends can be connected to an electrical cable such as a battery cable by crimping and soldering. The heat shrink tube....
Check Stock

10pcs 6 Gauge 6 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

Copper Battery Ring Terminal Connectors,UL Listed AWG Cable Wire Lugs Ends Assorted 6 Sizes Kit-40PCS,Marine Grade Wiring Eyelets

  • Made from 100% Copper for Maximum Conductivity,Heavy duty Electrical wire Lugs are great for inverters, Battery and automotive applications..
  • These closed tube copper lugs can be connected to a cable such as a battery cable by simply stripping insulation from the end of your cable, placing the lug over the exposed cable and crimping the barrel tightly and securely to the end of the cable..
  • Wire gauge identification marked on lug barrels. Widely used in household appliances, automobiles, electrical industry, mechanical equipment, power distribution cabinets, etc.
  • Seamless barrel design allows for maximum strength when crimped.
  • UL approved and tested,Closed end design seals out moisture so cables stay dry and corrosion free.
Check Stock

2 Gauge 2 AWG 10 Feet Black + 10 Feet Red (20 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

  • Included Items: Pure Copper Cable (select cable gauge, insulation color and length using the selection tabs) + 5pcs 5/16" STUD Copper Cable Lugs + 5pcs 3/8" STUD Copper Cable Lugs + 3 Feet Black Heat Shrink Tubing. Save time and money by purchasing all components in one product listing..
  • Made in the USA WindyNation Power Flex Cable is an ultra flexible PURE copper cable manufactured with a tough, solvent resistant EPDM insulation jacket. PLEASE SEE THE PHOTO GALLERY FOR A CABLE SPECIFICATION CHART (amperage, voltage, stranding, insulation and copper thickness, etc.).
  • Copper cable is SAE J1127 approved and uses annealed copper strands per ASTM standards.
  • Copper Cable Lug Description: pure copper with an exterior tin coating for corrosion protection (excellent for outdoor and marine applications). Cable lug utilizes a closed end design to protect cable from outdoor environment (i.e. moisture, acid, and solvents). Cable lug can be crimped or soldered. Flared barrel end design for easy entry of cable into the cable lug..
  • Heat Shrink Tubing Description: 600 volts, operating temperature -55 Celsius to +125 Celsius, resistant to most solvents and fire resistant (polyolefin material), black in color with no printing on tube. PLEASE SEE PHOTO GALLERY FOR A D....
Check Stock

280PCS Copper Wire Lugs [4 6 8 10AWG 1/4-5/16] Battery Cable Eyelets Tubular Crimp Connector SC Ring Terminals and PVC Terminal Boots Assortment Kit

  • These battery cable lugs includes AWG[4-1/4,4-5/16,4-3/8,6-1/4,6-5/16,6-3/8,8-1/4,8-5/16,10-1/4,10-5/16], marked with die index in addition to the in-box organization, so don't worry about the mix up. Come with 140pcs Soft PVC Terminal Boots tube.
  • Good Conductivity: All SC ring terminals are made of tin plated copper. tinned surface for corrosion protection and fully annealed to ensure optimum ductility to avoid severe deformation such as cracking and splitting when crimped, while providing a high degree of conductivity for maximum current flow..
  • These battery cable lugs have all passed the US standard ,safe and reliable, no overheating, no crimping issues. Widely used in machine, electric power, automobiles, home appliance and power distribution cabinets..
  • Widely Application: These battery cable lugs are ideal for distribution boxes, marine, automotive, solar panels, home applications and outdoor applications, etc..
  • Available in different sizes and specifications, fit various gauge cables and stud hole sizes. 100% REFUND AND REPLACEMENT GUARANTEE IN TAUKEALUGS!.
Check Stock