Top Tungsten Carbide Boring Bar

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

Men's Tungsten Black Bar Pendant Necklace with 22 Inches Stainless Steel Snake Chain

  • 2 pcs tungsten steel bar pendant necklaces for couples and lovers, 1 silver bar necklace and 1 black one, friendship necklace for boys and girls, gorgeous pendant chain for people who like clean and simple design, Easter gifts for kids.
  • Material: tungsten carbide, tungsten steel is known for its super hardness & flawless quality, the hardness is about 4 times over titanium steel, great material for long lasting jewelry without any fading or scratches. The density is about 1.5 times over titanium steel, it makes the pendant having a good weight to it. Hypoallergenic and outstanding tarnish resistance. Tips: the super hardness of tungsten carbide pendant lead to impact toughness declining, so please avoid falling down and impact..
  • Pendant measurements: Height 1.7"(42mm), Width 0.2"(5.6mm), Thickness 0.2"(5.6mm), Weight 0.56oz(17g). Comes with 1.5mm x 22" snake chains.
  • Minimalist design, simple and clean, less but better, goes with almost any outfits by a chic dose of low-key gorgeous.
  • Package with MOO&LEE branded velvet gift pouch(2pcs). To share the couples necklace with your significant other for Birthday, Anniversary, Christmas, Valentine's Day, etc..
Check Stock

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

  • ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
  • ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
  • ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
  • ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Nail Drill Bit Set Carbide Nail Drill Bits 11PCS Tungsten Ceramic Nail Bits Kit Acrylic Nail Drill Bit Set, Diamond Efile Nail Drill Bits Cuticle Poly Gel Nail Drill Bits, 3/32 Nail Drill Bit Set

  • ❥Professional Nail Drill Bit Set: 11 PCS nail drill bits for drill bits for nails( 8PCS colorful tungsten carbide nail drill bits, 1PCS light pink Ceramic nail drill bit, 1PCS blue silicone nail polish bit, and 1 PCS brush bit. You can finish exquisite acrylic nails faster than doing with nail file buffer sanding block or polishing bar..
  • ❥Multipurpose Combination: Cone drill bits for nails (Coarse grit).
  • Upgraded barrel ball tungsten carbide bit(Middle#1 grit).
  • Upgraded cylinder tungsten carbide bit(Fine grit).
  • Smooth tungsten carbide nail drill cuticle bits(X Fine grit).
  • Brush bit. Great nail file tool set for home salon dip manicure Pedicure..
  • ❥Universal nail drill bits3/32″ Shank: Suitable for most nail drill machines. It is easy to use, just insert or unplug the efile nail drill bits, and select the level on your nail machine.( Note: Please be careful when you use the powerful nail drill bits with sharp grit)..
  • ❥Compact Nail Drill Bit Holder: Come with little cute nail drill bit organizer, easy to store or take along anywhere. The dust proof and transparent nail drill bit case helps you figure out the desired nail drill bits for acrylic nails quickly. Best gift for nail art lovers..
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

EilxMag 100-Piece Router Bit Set 1/4" Shank with Aluminum Storage Case Tungsten Carbide Router Bits for Woodworking

  • 【High Quality】: The router bits set is made of high quality alloy steel, with strong surface coating treatment on the surface, which is tough and durable..
  • 【Widely Used】: This router bit suitable for many wooden boards, such as hardwood, softwood, solid wood, plywood, particle board, MDF, etc. It can be used for wood trimming, boring and tenoning, punching and carving..
  • 【Multi Types】: Router bit kit contains a variety of different type of router bits to meet your cutting needs.These Router Bits designed with 1/4" round shank,It has tungsten carbide cutting edge, which ensures sharp and precise cutting milling work..
  • 【Easy to Store】: The tungsten carbide router bit come with a sturdy aluminum outer box, it can perfectly store the products, effectively protect the internal products, and is also easy to carry, which is more convenient for your work..
  • 【Service & Guarantee】: If you are not satisfied with wood router bits for any reason, please contact us directly, we will help and provide replacement or refund..
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

Carbide Lathe Turning Tools, 20\ Full Size woodturning Tools, including Swan Neck Hollower, Rougher, Finisher, detachable alloy handle (Alloy Tool Set)

  • Include 11" handle, 9" tool bar and pre-installed carbide cutter, wrench*2, aluminum alloy case with sponge liner..
  • The length of the tool bar can be adjusted freely. For safety, please make sure the tool bar is fixed tighlty by both screws. So the total length of the tool should be within 19"..
  • Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable..
  • One nice thing about carbide cutter is that you can just replace the cutters and continue with your project. No need to sharpen the cutter..
  • Versatile and Convenient. Offers 2 alloy handle so it's easy to just grab and use without changing bits, the red and blue coating is easthetically pleasing while practically addiing friction..
Check Stock