Top Tungsten Carbide End Mills

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock

POWERTEC 15520 Aluminum Oxide Grinding Wheel 150 Grit, 6" x 3/4" with 1/2" Arbor

  • INCLUDES: 6” Aluminum Oxide Grinding Wheel w/ 150 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 6 inches in diameter, 3/4” in thickness, comes with a ½” arbor hole size, and possesses a 4140 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 6-inch bench grinder machines.
Check Stock

Norton 66253161393 10'' X 1-1/2'' X 1-1/4'' GP COARSE Type 01 Straight Gemini Bench & Pedestal Grinding Wheel

  • INCLUDES: 6” Aluminum Oxide Grinding Wheel w/ 100grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 6 inches in diameter, 3/4” in thickness, comes with a ½” arbor hole size, and possesses a 3450 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 6-inch bench grinder machines.
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

Glieskir 2 Pack Tungsten Carbide Scriber with Magnet,with Extra 10 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ✔2 Pack Tungsten Carbide Tip Metal Scriber Tool With 10 Free Replacements Marking Tip, Each Pen Tip Comes With A Protective Sleeve..
  • ✔The Pen Body Is Nade Of High-Quality Aluminum, And The Pen Tip Is Made Of High-Quality Tungsten Carbide, Sharp, High Hardness, And Strong Wear Resistance.
  • ✔The Magnet At The End Of The Tungsten Carbide Scriber Can Help You Easily Remove Excess Iron Filings From The Complex Carving Patterns, Or Help You Absorb Some Small Parts.
  • ✔Convenient Pen Design And Convenient Pocket Clip, Knurled Aluminum Handle Provides Maximum Control And Comfort..
  • ✔We Stand Behind 0ur Products 100% And Are Committed To Fulfilling Our Customers’ Needs. If You Are Unsatisfied With Your Purchase, Get In Touch With Us And We Will Be More Than Happy To Assist You..
Check Stock

S&F STEAD & FAST Carbide Burr with ¼” Shank ½” Cutter Dia 1” Length, Professional Grade Tungsten File, Die Grinder Bit for Electric or Air Die Grinder, Cylinder End Cut, Grinding Burr bit for Metals

  • CNC machined cutting burrs rotary file bit made with heat-treated tungsten carbide with HRA hardness 003e 90, hard enough to handle metals including steels, copper, cast irons and nickel alloys. Performs better than HSS burrs, especially at high temperatures..
  • Grinder burr bits with shank diameter 1/4”, head diameter ½” / 12.7mm, head length 1” / 25mm, total length 2 ¾” / 70mm.
  • Tungsten carbide bit - Cylinder end cut shaped tungsten grinder head to be used with electric, air / pneumatic rotary tools at maximum rotation speed of 35000 rpm.
  • Popular metal burr double cut surface for better control of the carbide bit and for fast stock removal.
  • Carbide bur - Use for cutting / shaping / deburring metals, grinding welds and cylinder head porting.
Check Stock