Top Tungsten Carbide Milling Cutters

KastKing Cutthroat 7 inch Fishing Pliers 7 inch Straight Nose

  • Corrosion Resistant Stainless Steel – The KastKing Cutthroat pliers are made from corrosion resistant 420 stainless steel and coated with a tough....
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braid with ease. Side mounted anvil cutters for....
  • Multi-Function Jaws – Grab and remove any fish hook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or....
  • Rubber Handle – The ergonomic textured rubber handle provides comfort and control. A thin grip profile and the spring loaded jaws allow for easy one....
  • Sheath/Lanyard Included – Includes a custom molded sheath with belt clip to ensure your investment is protected from normal wear and tear. Clip on....
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

KastKing Fishing Pliers with Fish Lip Gripper, 6" Fishing Split Ring Nose Pliers, 9" Fishing Lip Gripper, Orange

  • Key Features – Fishing Tools - Corrosion resistant 420 Stainless Steel fishing pliers and fish lip gripper – Durable corrosion resistant coating – Tungsten carbide line cutters slice through mono, fluorocarbon and braided fishing line with ease – Open split rings to change hooks – Tune baits - Crimp split shot or build leaders..
  • Corrosion Resistant Stainless-Steel – The 6-inch fishing pliers are made from corrosion resistant 420 stainless-steel and coated with a tough, corrosion resistant exterior coating for added protection. Designed for long term performance, these fishing pliers are ideal for both freshwater and harsh saltwater environments..
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braided fishing line with ease. Side mounted anvil cutters for easy access, cutters on the KastKing Fishing Pliers allow you to cut your tag end as close to the knot as you desire without any obstructions..
  • Multi-Function Jaws – Grab and remove any fishhook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or build a steel lea....
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Whitney Tool 355070 Keyseat Milling Cutter Style 121 Carbide Tipped 507 10 7/8 Cutting Diameter 5/32 Cutting Width Stagger Tooth

  • Carbide tipped, stagger tooth style 121 #506 (8) 3/4" X 5/32".
  • Carbide tipped cutters cut 3 to 4 times faster than HSS cutters.
  • Increase production and reduce overall machining costs.
Check Stock

End Mill PCB Engraving Bits 10pcs Titanium Coated Tungsten Carbide Drill Bits Set CNC Rotary Milling Tool 3.175mm Shank x 1mm Diameter

  • TUNGSTEN CARBIDE MATERIAL: Made from tungsten carbide material with good milling, cutting performance, ensuring high work efficiency.
  • FUNCTION: Sharp edges, can be use for milling holes, grooves and edges on plates and the process will be smooth.
  • SUITABLE MATERIAL: Many items or materials can be engraved such as circuit boards, plastics, stainless steel and copper.
  • HIGH HARDNESS: Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
  • EXQUISITE WORKMANSHIP: Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank.
Check Stock

Piscifun Carbon X Spinning Reel with Fishing Pliers

  • Feather Light - The Carbon X is meticulously crafted with an all carbon fiber body, rotor and side plate making it one of the lightest in its class,....
  • Anti-Corrosion Aluminum - The aircraft-grade anodized aluminum delivers excellent corrosion resistance, great for long term use without any signs of....
  • Multiple Retrieves - The Piscifun Carbon X spinning reels features a lightning fast 6.2:1 gear ratio as well as a buttery smooth 5.2:1 in our 1000....
  • Tungsten Carbide Cutters - The Sharpest Tungsten Carbide Cutters (which are fully replaceable) of any pliers on the market, make it extremely easy to....
  • Silky Smooth - You will be amazed at the incredible smoothness of the Carbon X, the 10+1 shielded stainless steel ball bearings are critical for....
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock