Top Tungsten Carbide Tool Holder

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...R06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, p....
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

20PC Double/Single Cut Carbide Burr Set - 0.118 3mm Shank Rotary Tool Cutting Burrs - Dremel Accessories Fordom Flex Shaft Dewalt And Die Grinders - For Wood Carving Metal Working And Engraving.

  • ✔️ [PREMIUM BURRS DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide burr sets are exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] These rotary tool bits are made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double and single cut tooth angle which prevents chipping, this tungsten carbide bit set is superior to any high speed tungsten carbide burrs..
  • ✔️ [A TOOLBOX MUST] This 20-piece burr set for wood includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone. The kit includes a massive selection of shapes for all types of cuts..
Check Stock

Tungsten Carbide Burr Set 1/8 3 mm Shank Die Grinder Bits 20 PC Cutting Burr Bits for Dremel Double Cut Rotary Burr Set for Metall Carving Engraving Drilling Polishing

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary files are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Pilim carbide bit have shank 1/8" (3 mm) - compatible with Dremel, DeWalt, APEXFORGE, Bosch, Ingersoll-Rand, Makita, Milwaukee, Beyond and other rotary tools with 1/8" collet. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

Tungsten Carbide Burr Set 1/4 Shank 10PC Double Cut Rotary Cutting Burrs Die Grinder Bits for Steel and Wood Working Grinding Carving and Engraving

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary burrs are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, work on weld seams, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Shank 1/4" - fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

T/C Olsen HEGAR Needle Holder 6.5\ with Tungsten Carbide Inserts O.R Premium Grade (HTI BRAND)

  • T/C OLSEN HEGAR NEEDLE HOLDER 6.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
Check Stock

Sewline Mechanical Fabric Pencil, Pink

  • Value Package: 2 pcs 2.0mm carpenter pencils, 1 pcs Carbide Scriber, 2 tube Graphite Lead Refills(HB, 12 per tube), 1 pcs color lead refills( yellow & red, 12 per tube), 1 pcs eraser, 2 pcs lead sharpener.
  • Mechanical Carpenter Pencils: Includes a comfortable metal threaded anti-skidding grip as well as a sharpener on the cap of each pencil. Strong and hard to be broken,great for drawing drafting Sketching.
  • Carbide Scriber Tool：Durable tungsten carbide tip and an knurled aluminum body,can easily handle hard materials including metal, tile, glass, ceramics, wood. Comes with tip cover to protect tungsten carbide point when not in use..
  • Portable : handy pen-style design with convenient pocket clip,ideal for carpenters, builders.
  • 100% RISK FREE PURCHASE: If you are not satisfied with Nicpro mechanical Carpenter Pencils Kit , we’re very happy to either provide a no-questions-asked Refund or Replacement. Order today risk free!.
Check Stock

HILTEX 10108 Tungsten Carbide Router Bit Set, Woodworking Tools and Accessories, 1/4-Inch Shank, 24-Piece Set, Red, Blue

  • WOOD ROUTER BITS: The HILTEX Tungsten Carbide Router Bit Set is the perfect addition to your woodworking tools and equipment. Each router bit in this 24-piece set is built with a tungsten material that performs clean cuts on your wood projects..
  • TUNGSTEN BIT SET: Every router bit is tipped with machined YG8 tungsten carbide blades that can trim, edge, and cut into all types of wood. Each bit in this compact bit set is heat-resistant to help prevent damage to your wood creations..
  • EASY COMPATIBILITY: Each bit features a universal 1/4-inch shank to allow it to work with any router tool. Select bits also have ball-bearing rollers for better alignment and smoother routing..
  • VERSATILE & POWERFUL: You can use each compact router bit for wood and carpentry applications like edging, trimming, veining, and grooving. Each piece is made of hardened, solid alloy steel and has a powder-coated finish for maximum durability..
  • WHAT'S INCLUDED: This set includes 24 tungsten carbide bits and a storage box. The storage box features labeled slots for each bit for easy identification and for storage and transportation from job to job.Please note that packaging may vary between two styles..
Check Stock

Scribing Pen, Tungsten Carbide Tip Scriber Scribing Engraving Etching Pen DIY Engraver Etcher Tool Kit for Metal Glass Ceramics Stone Tile Wood Jewelry,with Clip and Magnet

  • 【Tungsten carbide tip】 Each scribe has a tungsten carbide tip, which is twice as hard as steel, with high quality and long service life. It is a durable manual scribe, which can be used to mark lines conveniently..
  • 【Portable】The marking pen is designed with a clip, which can be easily clipped in your pocket or bag, which is convenient for you to carry and use it anytime, anywhere..
  • 【Easy to use】No power required, and the size of the scribe is similar to a pen. Using it to scratch/mark the surface is like using a pen. Easy to control, smooth and clear strokes..
  • 【Accurate Marking】Compared with pencil or ink line, using this professional line drawing tool can make the line clearly visible, not easy to erase, and the mark is thin and accurate..
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock