Top Tungsten Steel Mills Tools

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

KITEXPERT Pepper Grinder, Large Capacity Pepper Mill Grinder with Upgraded Grinding Precision, Stainless Steel & Chunky Glass Sea Salt Mill Refillable

  • Adjustable Grinder: Grind black peppercorn with 6 levels.
  • Maintain Freshness: Keep your ground spices fresh and away from moisture and dust with these mills.
  • Maximum Flavor: Salt and pepper mill mechanisms strip your spices down to their individual layers.
  • Salt & Pepper Mills: The clear acrylic mills with stainless steel finishes are easy to refill.
  • Seasoning & Spice Tools: Cole & Mason continues to place seasoning at the heart of the kitchen.
Check Stock

AIMIMI Tungsten Steel Rod Wearable Specialty Metal Raw Materials Tungsten Steel Rod for Industry Electronic Machinery Aerospace (Length 200mm),11200mm

  • Good rigidity and high strength, strong wear resistance..
  • It can process materials with hardness below 55..
  • Widely used in tungsten steel mold, tools, such as punching needle..
  • High quality ultra-fine particle and ultra hard tungsten steel bar..
  • Used for tool grinding, can be grinded into cutting tools, such as cutter, milling cutter, bit cutter, etc..
Check Stock

AIMIMI Tungsten Steel Rod Specialty Metal Raw Materials Tungsten Steel Rod for Industry Scientific Research and Experiments (Length 200mm),4.0200mm

  • Good rigidity and high strength, strong wear resistance..
  • It can process materials with hardness below 55..
  • Widely used in tungsten steel mold, tools, such as punching needle..
  • High quality ultra-fine particle and ultra hard tungsten steel bar..
  • Used for tool grinding, can be grinded into cutting tools, such as cutter, milling cutter, bit cutter, etc..
Check Stock

COLE & MASON Derwent Salt and Pepper Grinder Set - Stainless Steel Mills Include Gift Box, Gourmet Precision Mechanisms and Premium Sea Salt and Peppercorns

  • Adjustable Grinder: Grind black peppercorn with 6 levels.
  • Maintain Freshness: Keep your ground spices fresh and away from moisture and dust with these mills.
  • Maximum Flavor: Salt and pepper mill mechanisms strip your spices down to their individual layers.
  • Salt & Pepper Mills: The clear acrylic mills with stainless steel finishes are easy to refill.
  • Seasoning & Spice Tools: Cole & Mason continues to place seasoning at the heart of the kitchen.
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...uck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
  • 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-density tungsten carbide cutting head,high-sp....
Check Stock

Thread Mills Exercise Equipment for Home Use Porta 3.175mm Shank Single Flute Spiral Milling Cutter 10pcs Titanium Coated Carbide End Mill CNC Router Bit Engraving Milling Cutter

  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • hex shank High Speed Steel screw spiral point thread metric plug drill bits， Have sufficient bending strength and wear resistance..
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • 1. These CNC end mills are made from high quality material of tungsten steel.
  • 2. Wear-resisting and Not easy to stick milling cutter.
Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

  • ❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • ❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • ❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • ❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • ❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

Ohto MF-20K3B Multi-Pen Hexagon Barrel Knurled Grip 3 Points Matte Black

  • Knurled aluminum handle provides maximum control and comfort with exquisite craftsmanship..
  • Scribing pen comes with a convenient pocket clip as a special hand tools for ceramic marking..
  • The tungsten carbide tip is marked with hard materials including hardened steel, stainless steel, ceramic and glass..
  • Permanent magnets pick up small parts and retrieve steel shavings from hard-to-reach places..
  • Hard and sharper tungsten carbide tip can form precise lines and characters on almost all metals..
Check Stock