Top Turbine Gas Flowmeter Electronic

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

  • Professional Ggs Flow Tester / Meter Peashooter Style.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

Flowmeter Hose with 5/8\-18 Male Connectors - 5 Feet Long

  • For its use with Flowmeters for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium.
  • 5 feet hose with 5/8"-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
  • 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber..
Check Stock

Argon Co2 Gas Flow Meter Scale Tester Measure Flowmeter for Mig Tig Welder Welding 1PK

  • Suitable for the Nozzle Caliber range of 4 - 30mm.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

Turbine Flow Meter Electronic 3/4\ 3/4 inch 10-100L/Min Oil Flowmeter Kerosene Gas Methanol Diesel Fuel Flow Digital Meter Oval Gear Gauge LCD BSPT/NPT with Battery

  • Flow Range: 3/4" & 1":10-100L/Min,1.5":40-280L/Min.
  • Specifications: 1":105*32*66mm L*W*D ,1.5":135*68*45mm L*W*D.
  • Turbine Flowmeter:Low-cost,High-precision,Durable & Compact.
  • The internal components are easy to replace, easy maintenance.
Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 Compatible with Miller Lincoln Mig Tig Weld 0-4500PSI / 0-10BAR

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Features: 2" dual-gauges for easy reading..
  • 3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
  • 4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
  • 5.Plastic adjustment knob for smooth "easy touch" flow settings..
Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator cutting Regulator CGA580 With 6.6Ft Gas Hose

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Features: 2" dual-gauges for easy reading..
  • 3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
  • 4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.Plastic adjustment knob for smooth "easy touch" flow settings..
Check Stock

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
  • 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
  • 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

  • Argon Regulator for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
  • Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
  • Includes 5 Feet Argon Hose with 5/8"-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

  • ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
  • ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
  • ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
  • ✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
  • ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..
Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

  • [APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
  • [CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
  • [MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
  • [RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
  • [PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

WORX WG520 12 Amp TURBINE 600 Electric Leaf Blower

  • [TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
  • [TWICE AS FAST AS PRO BLOWERS] Professional-grade gas blowers rely on outdated tech. The Turbine is cutting edge, and spins twice as fast as the blowers used by commercial grounds crews.
  • [2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. On the open lawn, switch to speed 2 and see what the 110 mph Turbine can do.
  • [600 CFM] We named the Turbine 600 after the 600 Cubic Feet per Minute of high-capacity air volume that shoots out of its wide-mouth nozzle. That’s a wide, strong path of air that allows you to clear large areas with fewer passes.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
  • [HYPER-STREAM AIR NOZZLE] We didn’t just stop designing once we were finished with the Turbine engine. We added an attachable nozzle, optimized to direct all that volume in a concentrated area for tougher jobs.
  • [ONE-HANDED OPERATION] All the power and only 6.4 lbs. The Turbine 600 is desig....
Check Stock