Top Turbine Wheel Shaft

Gryphon Studio Stained Glass Grinder

  • ►Convenient and Portable:110V Power Stained Grinder Professional Industrial Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding va....
Check Stock

PULSAR Turbo Rebuild Kit Turbine Wheel Shaft for 94-97 7.3 OBS Truck TP38 Turbo

  • 360 degree CNC machined brass thrust bearing for better durability.
  • Staggered step gap seal rings on the compressor and turbine ends for a better seal.
  • Fits 1994-1997 7.3L OBS truck with Garrett TP38 Turbo ONLY.
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (6.1mm)

  • EASY TO USE: Pattern edge of shaft lock collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • REUSABLE: Shaft lock ring has carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • CONVENIENT: Shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • DURABLE: Lock shaft collar adopts appearance plating process, no rust, no scratch, with good performance and long service life..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs..
Check Stock

T Sportline Tesla Wheel Touch Up Paint for Tesla Model 3 18' & Model S 19' Aero Wheel (Dark Metallic Gray)

  • T Sportline Tesla Wheel Touch Up Paint - Aero / Dark Metallic Gray Wheel (Not Made For Matte Black Wheels).
  • Touch Up Paint For Tesla Model 3 Aero Wheel, Tesla Model S/X Sonic Carbon Slipstream Wheel and Model S Twin Turbine Wheel.
  • Our T Sportline Wheel Touch Up paint is for touching up minor curbrash on T Sportline Tesla Wheels..
  • Disclaimer: Touch up paint is not a perfect match. If you are looking for a perfect match to your curb rashed wheel, we recommend a professional wheel repair specialist..
  • Please shake the bottle vigorously before use. Store in a cool, dry place away from direct sunlight..
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

  • Application size: Stepper motor 8mm to 11mm bore adapter.
  • Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.
Check Stock

QWinOut Carbon Fiber Magnetic Propeller Balancer Props Essential for DIY RC Quadcopter FPV Airplane Car Boat

  • The use of the N45 high performance magnet, fixed plate made of carbon fiber board material.
  • Maglev-method was adopted on the center fixing axis to balance the tested products with zero resistance.
  • Fixed-wing propeller, helicopter rotor the maglev propeller balancer suitable for any size and weight, marine propeller, car wheels, turbine blades,....
  • Fit 0-80g Fixed wing propeller,marine propeller,Car wheel hub,Turbine blade,etc(helicopter not available).
Check Stock

Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913

  • Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913.
  • This Bower Wheel / Squirrel Cage fits Maytag dryers..
  • Measurements: 7 1/2" Diameter and 3 1/8" deep also Fits 1/2" "D" shaft.
  • motor, 1/2" shaft diameter w/ a flat side on the shaft..
Check Stock

Pikasola Wind Turbine 200W max 220W 12V 5 Blade Wind Vertical Axis Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller for Hybrid Wind Solar System

  • ... to blades be fixed inside by a flange, then not risk of blade falling off..
  • 2.（-High Wind Energy Utilization-）: Wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization. Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed..
  • 3. (-Quietly-): The vertical wind turbine is quieter than horizontal axis turbine. Double bearings make it more stable and not easy to shake when wind generator is running. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system..
  • 4. (-Excellent Generator-): Permanent magnet three-phase alternating current can reduce the resistance torque of wind generator effectively. Also make the wind wheel and the generator matching better and then running more reliability..
  • 5. (-Installation convenience-): Vertical axis wind turbine can use a screw pile foundation. It is a cost reduction and easy&quick installation compare with concrete foundation installation. Screw pile foundation can be fully recycled at the end of life. An environmentally friendly and low carbon emission way..
Check Stock

Pikasola 400W Wind Turbine Generator AC 12Volt Economy 3 Blades Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed,400w Windmill Generator for Home

  • 1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail.
  • 2. Wind blade: 60cm in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
  • 3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
  • 4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
  • 5. Remarks: our products are designed through repeated experiments and tests, and the parameters ....
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

T Sportline Tesla Wheel Touch Up Paint for Gunpowder Gray (Satin) 20” Model 3 Uberturbine/Sport/Zero G, 21” Model Y Uberturbine/Performance, 21” Model S Arachnid, 22” Model X Turbine Wheel/Rim

  • T Sportline Tesla Wheel Touch Up Paint - Gunpowder Gray (Satin / Matte).
  • Paint matches: 20" Model 3 Sport Wheel in Gray 20" Model 3 Uberturbine Wheel 20" Model 3 Uberturbine Performance Wheel 20" Model 3 Zero G Wheel 21" Model Y Uberturbine Wheel 21" Model Y Uberturbine Performance Wheel 21" Model S Arachnid (2021 - Present) Wheel 22" Model X Turbine (2021 - Present) All T Sportline Satin Gray Wheels.
  • Our T Sportline Wheel Touch Up paint is for touching up minor curbrash on T Sportline Tesla Wheels.
  • Disclaimer: Touch up paint is not a perfect match. If you are looking for a perfect match to your curb rashed wheel, we recommend a professional wheel repair specialist..
  • Please shake the bottle vigorously before use. Store in a cool, dry place away from direct sunlight..
Check Stock