Top Turbo Drain Line Kit

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

ICT Billet LS Truck Turbo Oil Drain Pan Adapter -10AN Hose to Oil Pan 551208

  • Connect a -10AN Oil Return Line to your Oil Pan.
  • Made in Wichita Kansas From Aerospace Grade USA Produced Billet Aluminum.
  • Compatible With Low Oil Sensor Hole in Oil Pan.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ... pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

SuperATV Can-Am Maverick X3 MAX Turbo/X See Fitment Full UTV Skid Plate | 1/2” Thick Proprietary ARMW Material | Front to Back Protection | Abrasion Break & Bend Resistant | Made in the USA!

  • 【Fitment】2017+ Can-Am Maverick X3 MAX Turbo / 2017+ Can-Am Maverick X3 MAX Turbo R / 2017+ Can-Am Maverick X3 MAX X DS Turbo / 2017+ Can-Am Maverick X3 MAX X RS Turbo R / 2020+ Can-Am Maverick X3 MAX X RS Turbo RR / 2020+ Can-Am Maverick X3 MAX X MR Turbo RR.
  • 【Tough, Smart Design】Protect your Can-Am Maverick X3 Max’s undercarriage with a SuperATV ARMW Skid Plate. Our skid plates are made with a proprietary blend of UHMW called ARMW. It has high strength and low wear properties meaning you can go hard on the trail, and ARMW will help keep your UTV in one piece!.
  • 【Full Protection 】The Can-AM Maverick X3 Max Full Skid Plate offers front to back full protection for your UTV. Our 1/2” ARMW is cut to fit your X3 perfectly. Bolts fit flush to skid plate for a super smooth surface. Includes additional plate supports for extra skid protection!.
  • 【Drain Ports】Our Can-Am Maverick X3 Max skid plate is smartly designed with drain ports so clean up is easy when after a day in the mud. Water....
Check Stock

7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit for Garrett TP38 1994-2003 Ford Powerstroke 446579-0001 170293-360° Thrust Repair Kit - 7.3L Turbo Rebuild Kit By TOPEMAI

  • 7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit For 1994-2003 Ford Powerstroke,Replaces 170293,446579-0001, 817-1004-002F,....
  • 7.3L Turbo Compressor Wheel Rebuild kit for 2003 Ford E-350,2003 Ford E-350 Club Wagon,2003 Ford E-450 Super Duty,2003 Ford E-550 Super Duty,2000-2003....
  • 7.3L Turbo Rebuild kit for 1994-1998 Ford F-250,1994-1997 Ford F-350,2000-2003 Ford F650,2000-2003 Ford F750,1994-1997 Ford F Super Duty,1999-2003....
  • Turbo Compressor Wheel kit for ford AKA gtp38 turbo compressor kit,Gtp38 turbo upgrade,7.3 turbo wheel,Garrett tp38 turbo rebuild.This Kit Has a 360....
  • Package Include:7.3L Turbo Compressor Wicked Wheel, Upgraded 360 Degree 5 Oil Port Brass Thrust Bearing, Thrust Collar, Thrust Spacer, Front and Rear....
Check Stock

Triax Fleet Supreme ESP 5W-40 API CK-4 Full Synthetic Diesel Engine Oil, Friction Optimized and Boosted with Molybdenum & Nano-Boron, Superb Powerstroke Performance (5 Gallon Pail)

  • Unique Additive Technology for UNSURPASSED WEAR PROTECTION, oxidation, and high temp stability. 60% lower wear than leading lubricants and standards. WIDE RANGE COMPATIBLE – Compatible with all heavy-duty diesel engines..
  • HIGHEST VISCOSITY INDEX any 5W-40 motor oil, of any brand, with exceptional stability and flow properties. Friction modified and VI stabilizer pre-boosted. Un-rivaled turbo-charger protection, will not create deposits and ash on turbo bearings (will not fry on the turbo). Up to 4% Fuel economy vs any 15W-40. COLD FLOW – Exceptional cold flow down to – 46 F..
  • OUTSTANDING POWER-STROKE PERFORMANCE Including 6.0 L turbo diesel: ELIMINATES STICTION AND INJECTOR ISSUES that plague Power-stroke engines – No need for additional additives – Contains state-of-the-art dispersal and ash control systems to keep your engine extremely clean..
  • EXTREME DRAIN CAPABILITIES: 25,000 mile drain interval for pickups and 80,000 for class 8 semi-trucks*.
  • WHAT WILL YOU NOTICE THE FIRST TIME YOU SWITCH? – Dramatic reduction of engine noise. Improved fuel economy by at least 2%. Substantially longer drain intervals vs all other brands. Virtually no deposits on turbos. Significantly improved oil analysis results and engine durability..
Check Stock

maXpeedingrods TD05 Turbocharger for Subaru Impreza WRX STI EJ20 EJ25 2002-2006, Water + Oil Cooling TD05-20G Turbo Charger

  • 【Fitment 】: Compatible for Subaru IMPREZA WRX / STI EJ20 EJ25 engine 2002 - 2006. Cost-efficient replacement turbo can boost horsepower up to 420BHP.
  • 【Upgrade Version】: TD05-20G Turbo replaces the TD04 for a TD05H turbine wheel, enlarges the turbine housing area to 7 square cm to improve the exhaust efficiency, thus gain more power than the stock turbo.
  • 【Notice】: All for WRX Wagon engines and automatic sedan engines came with a TD04,all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required.
Check Stock

Turbocharger Rebuild Kit,Turbocharger Gasket Repair Rebuild Kit Fit for Garrett T2 TB02 T25 T28 TB25 TB28

  • 【Brilliant Compatibility】Turbo Charger Rebuild Kit is designed to fit for Garrett T2 TB02 T25 T28 TB25 TB28.Manufactured according to the original specifications, which are very compatible with your model..
  • 【Feature】Turbo Rebuild Kit Includes 360° thrust bearings for greater durability at higher shaft speeds.It includes different accessories to meet your repairing needs, easy to carry..
  • 【Standard Specification】Turbocharger Repair Kit Fit for Garrett Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control..
  • 【Brilliant Compatibility】Turbo Charger Rebuild Kit is designed to fit for Garrett T2 TB02 T25 T28 TB25 TB28.Manufactured according to the original specifications, which are very compati....
Check Stock

Ford Genuine Fluid XO-5W30-QFS SAE 5W-30 Full Synthetic Motor Oil - 1 Quart Bottle - Pack of 12 (12)

  • CRP organic, metallic, Moly plating technology for unsurpassed wear protection, oxidation, and high temp stability.
  • Friction modified and VI stabilizer pre-boosted.
  • will not create deposits and ash on turbo bearings (will not fry on the turbo).
  • Contains state-of-the-art dispersal and ash control systems to keep your engine extremely clean.
  • 25,000-mile drain interval for pickups and 80,000 for class 8 semi-trucks.
  • Eliminates the need to clean diesel particulate filters and is for use in virtually all diesel-powered pickups and heavy-duty trucks, both pre 2007 and post 2007 models fitted with emission control systems.
Check Stock

Roebic K-37-H Septic Tank Treatment 64-Ounce

  • COMPLETE SEPTIC SYSTEM KIT: Roebic SMP-1000-PAK-1 Septic System Maintenance Kit contains 4 quarts of Roebic’s exclusive concentrated bacterial....
  • STEP 1: Roebic K-37 Septic Tank Treatment promotes the rapid breakdown of solids to reduce sludge and scum levels, resulting in reduced odors, less....
  • STEP 2: Roebic K-570 Leach and Drain Field Treatment helps to rapidly break up clogged or sluggish drain fields, the primary reason for septic system....
  • STEP 3: Roebic K-87 SGP Soap, Grease, and Paper Digester naturally breaks down waste such as soap, detergents, grease, and paper to help ensure....
  • STEP 4: Roebic K-97 Main Line Cleaner naturally breaks down waste such as paper, sludge, fats & grease to quickly restore proper flow to your sewer....
Check Stock

Post-Surgical Drain Patient Care Kit Black

  • No More Pinning or Tugging on Drains! Comfortable and Convenient Support Garments for Patients Wearing Post-Surgical Drains PSD Kit Comes Inside a Zippered Clear Finished Edge Vinyl Carrying Case to Bring to the Hospital to use Following Surgery.No Special Clothing Needed to Wear ..
  • PSD (Post-Surgical Drain) The PSD Belt is Worn all Day and Night Designed With Two Pouches PLUS !!!LoopTabs with Snaps on Both Sides of the Pouches That Open and Close to Guide Drain Tubing and Drain Bulbs Securely Into Pouches . Each Pouch Expands to Hold Multiple Drains . PSD Belt is Made From Soft Cotton and is Machine Washable.Some of the pictures used for the PSD Kit demonstrate the product use as well as the other color available, pink with white polka dots.
  • Bring to Hospital for Easier Transition Based on Patient Suggestion. Complete Kit with PSD Belt for Day/Night Wear and Soft High Quality Clear Vinyl With Finished Edge Shower Bag for Hands Free Showering While Shielding Drains from Soap and a Clear View of the drains. Designed for Male and Female Patients..
  • Shower Bag with Adjustable Sliding Slim Line Buckle to Personalize Fit 52" Neck Strap and 52" PSD Waist Belt with Adjustable Center Release Buckle. No Tying Strings Which May Come Untied and Pull on Drains.Easy ....
Check Stock

SuperATV 4500 lb Black Ops Winch with Heavy Duty Winch Mounting Plate for 2019+ Polaris RZR XP Turbo/RZR XP4 Turbo | Complete RZR Winch & Winch Mount Kit Ready for Install! | No Drilling Required

  • ✔️ 【Fitment】2019+ Polaris RZR XP Turbo / XP 4 Turbo.
  • 【Complete, Bolt-On Ready Winch Kit】The strongest and safest way to mount a winch to your UTV. When you bury it in mud and need a winch out, SuperATV’s  RZR XP Turbo winch mount has the strength to get you unstuck..
  • 【4500 lb. SuperATV Black Ops Winch】100% Waterproof Winch | Permanent Magnet 12V 1.3 Hp Dc Motor | 4500 Lb. Rated Line Pull Synthetic 50' Rope | 166:1 Gear Ratio | Winch Dimensions (Lxwxh) = 14.49” X 4.60” X 4.37” | Mounting Holes: 76mm x 169mm (3" x 6 5/8") / 76mm x 124mm (3" x 4 7/8")  | Fairlead Bolt Pattern: 109mm (4.29")  / 152mm (5.98").
  • 【Machine Specific Mounting Plate】Mounts 4500 lb. Winch in factory location (above front differential) | Made with 3/16” heavy-duty steel plating | UV-resistant wrinkle black powder coating prevents corrosion | No drilling required!.
Check Stock