Top Turbo Kit For Ls

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ... pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

Turbo Kit T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0 99+

  • Chevy Silverado / GMC Sierra LS Single T4 6466 Turbo Kit.
  • Hi Flow T4 cast passenger and oversized cast driver side manifold.
  • T4 T70 Trim Turbocharger Cast Passenger T4 Manifold Cast Driver High Flow Manifold Stainless Steel Crossover Stainless Steel 3" Downpipe w/ turndown....
Check Stock

Moroso 62391 0-400 lbs Valve Seat Pressure Tester

  • All-In-One Solution - COMP Cams Spring Seat and Seal kit offers a convenient kit for replacing the seats and seals on your GM LS engine..
  • Beehive Ready - The 528-KIT Spring Seat and Seal Kit is ready to accept the GM LS6 and COMP Cams LS6+ Beehive Valve Springs..
  • Quality Components - The 528-Kit Seat and Seal Kit is made of quality components that ensures durability and dependable sealing capabilities..
Check Stock

Brian Tooley Racing BTR Dual Spring Kit .660' LS1 LS2 LS3 LQ4 Steel Retainers Fits LS1 LS2 LS3 LS4 LS6 L76 L92 L99 LQ4 LQ9 L33 LSA

  • Brian Tooley Racing BTR Dual Spring Kit .660" Steel Retainers.
  • This very popular Spring Kit is highly recommended when upgrading to a aftermarket Camshaft.
  • .660" Lift dual spring kit for LS engines using stock rocker arms..
  • Included dual polished springs, matching Steel Retainers, locators for stock guides, locks and seals..
  • Spring specs are 155 lbs @ 1.780", 380 lbs @ 1.180", 400 lbs @ 1.130, coil bind @ 1.070" This is a drop in spring kit for all 15 degree LS heads including LS1 LS2 LS3 LS4 LS6 L76 L92 L99 LQ4 LQ9 L33 LSA..
Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

  • 【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
  • 【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
  • 【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
  • 【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
  • 【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 3 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Turbo LS Stage 3 Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are:230/235 .616"/.614" 114+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 2 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

BTR Brian Tooley Turbo LS Stage 2 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
  • Cast passenger and driver side manifolds.
  • -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check Stock

Bridgold 40pcs(20pcs 74HCxx+20pcs 74LSxx) Series Logic IC Assortment Kit

  • We carefully select the combination of 74HCXX series and 74LSXX series for you to meet your needs for IC chip work..
  • 74HCxx Series Shift Output Registers IC chip..
  • The most popular 74LSx series IC chip kit..
  • 74LS00 2 input four NAND gate, 74LS02 2 input quad NAND gate, 74LS04 six inverter..
  • Pack including:74HC00*2pcs,74HC02*2pcs,74HC04 *2pcs,74HC08 *2pcs,74HC14 *2pcs,74HC32*2pc,74HC138*2pcs,74HC164*2pcs,74HC165*2pcs,74HC595*2pcs,74LS00*2pcs,74LS02*2pcs,74LS04*2pcs,74LS08*2pcs,74LS32*2pcs,74LS47*2pc,74LS86*2pcs,74LS90*2pcs,74LS138 *2pcs,74LS245*2pcs.
Check Stock

Kenwood 10 Speaker Foam Surround Repair Kit - 10 Inch

  • Fits Kenwood JL-767, JL-830, KFC-W210, KFC-HQW250, KFC-WF252, KSC-9901, KL-44, LS-1800, LS-1900, LS-405, LS-405A, LS-405B, LS-407, LS-44, LS-9000X,....
  • Same surrounds that professional reconers use.
  • Complete 2 speaker foam surround installation kit - 10 inch.
  • Easy to follow step-by-step installation instructions and videos.
Check Stock

Rexka 30pcs Fender Liner Under Cover Wheelhouse Liner Screw Bolt Compatible with Toyota Lexus 90159-60477

  • Other Names: Mount Bracket Bolt, Wheelhouse Liner Screw, Air Deflector Screw, Deflector Screw, Bumper Cover Bolt, Bumper Cover Screw, Side Shield....
  • Fits: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, HS250h, IS F, IS250, IS350, LS430, LS500, LS500h, LX470, RC F, RC300,....
  • Fits Avalon, C-HR, Camry, Corolla, Echo, Highlander, Prius, Prius AWD-e, Prius C, Prius Prime, RAV4.
  • M6.2 x 22mm 18mm Washer Diameter 10mm Hex, Black E-Coat Phillips Hex Head Screw.
Check Stock

ICT Billet Corvette LS Alternator & Power Steering Pump Bracket Accessory Kit Turbo LS1 551521X-1

  • Made In Wichita, Kansas From Aerospace Grade, USA Billet Aluminum.
  • This Kit Requires The Use Of A Corvette Or (CTSV/G8/SS) Crank Pulley (12560115) ICT Billet (BAL100).
  • Compatible With Chevy Corvette G8 SS CTS-V Z06 LS1 LS2 LS3 LS6 LS7 L77 5.7L 6.0L 6.2L 7.0L Gen III IV (1997-2013) Series Engines.
  • Included in the package is the alternator, & power steering bracket, 1 smooth pulley, and all required mounting hardware..
  • This Kit Will Place The Alternator & Power Steering Pump In The Factory Corvette Location..
Check Stock

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical：These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock