Top Turbo to downpipe Clamp

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • ...orce without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..
Check Stock

maXpeedingrods New T3 T4 T04E A/R.63 V-band Turbo 420+HP STAGE III Turbo Charger + Universal Oil Drain & Return Feed Line Kit

  • OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm​* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm.
  • Perfect for all 4 or 6 CYL, 1.5L-2.5L engines.
  • Horse Power: Capable of Boosting Horse Power up to 420HP.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns & Exhaust (Downpipe) Flange: V-Band Flange.
Check Stock

Rubber Diverter to Fill a Rain Barrel from Your downspout (Diverter Only, 2x3)

  • Drill a 2 1/8″ hole – do not cut your downpipe – of the 3″ side of the downspipe.
  • This unit Can also be inserted into either a 3×4 or 2×3 downpipe.
  • Drill hole and squeeze into place. Then use the 2 provided screws to secure it.
  • If you have deep ridges in your downpipe water WILL leak out.
  • Best used for rain barrels under 100 gallon.
Check Stock

HENYEE GT45 T4 Turbo 4 Bolt V-Band 1.05 A/R 98mm 600+HPs Huge Boost Upgrade Turbocharger External Wastegate for 3.0L-6.0L Engine Turbo Charger Racing & Gaskets Black Finish

  • APPLICATION: Perfect for all 3.0L-6.0L engine, fit for Fit for Mazda CX-9 2007-2012 3.7L engine.
  • HORSE POWER: Boost Horse Power up to 600+ BHP.
  • Exhaust (Turbo Manifold) Flange: T4 4 Bolt Flange.
  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Reliable Quality: Every turbocharger is individually tested and computer balanced to ensure reliability and consistency.
  • Accessories: You will get exactly as shown in the picture above.
Check Stock

DNA Motoring WG-44MM-BK 44mm Steel Water Cooled External Turbo Wastegate Kit,Black

  • Wastegate Kit: High Pressure Reinforced and Temperature Resistant Actuator Diaphram Included, Other Installation Hardware as Shown.
  • Compatibility: V-Band Clamp-On Design, Fits any 44mm Turbo Manifold Clamp-on Wastegate Port.
  • Working Pressure (PSI): 13 PSI (Spring Included).
  • High Quality: High Strength Cast Steel Body With Steel Head for Long-Lasting Durability.
  • Easy to Use: Bolt-On Housing Design for Secure Spring Changing and Adjustment.
  • Application: Great for Custom Turbo Applications or Upgrades.
  • Comes with 13 PSI Spring Installed and 2 Springs (7.5 PSI And 1.5 PSI ) for Replacement.
Check Stock

BLACKHORSE-RACING 3' Vband 90 Degree Elbow Adapter Flange Kit to T4 Turbo 304 Stainless Steel Cast

  • ▲ 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. Vband Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • ▲ Cast Turbo Elbow Adapter + Vband Flange and Clamp Kit, One Pair. T4 to 3" V-Band.
  • ▲ Flange Is Threaded with 4 M10x1.5 Holes, T4 Turbo Flange (to Turbo Side).
  • ▲ 3" Vband Flange (to Header/Manifold Side).
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service..
Check Stock

10X 2 Inch 57mm - 65mm Stainless Steel T-Bolt Clamps Turbo Intake Intercooler Clamp (10Pcs 2 inch)

  • ▶Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • ▶These high quality T-bolt clamps offer high tensile strength, durability and corrosion resistance..
  • ▶Universal application,Perfect for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.
  • ▶Clamp Range: 57 mm-65 mm or 2.24"-2.56".
  • ▶This T-Bolt Clamp fits for 2" or 51 mm inner diameter silicone hose fit for 2.4" or 61 mm outer diameter silicone hose..
Check Stock

Downspout Extender, 2 Pack Drain Downspout Extender, Retractable Rain Gutter Drainage Pipe Down Spout Drain Extensions Gutter Connector Rainwater Drainage Gutter Accessories (White)

  • Telescopic: This rain gutter extension pipe can be telescoped, and the length can be adjusted according to the needs, which is convenient to use..
  • Quick Installation: This DIY friendly extension does not require cutting or trimming, and a removable adapter allows you to quickly and easily connect it to an existing downpipe..
  • Flood Prevention: Enjoy cleaner lawns and courtyards, this economical downspout extension sleeve helps prevent flooding, erosion and expensive maintenance..
  • Good Elasticity: Our downspout extension slot connector is thicker than other connectors, more durable, less prone to deformation, good elasticity, and less prone to cracking..
  • Keep Ground Dry: The gutter downpipe extension can easily extend from 20in to 59in to divert unwanted rainwater from your ground when connected to the downpipe..
Check Stock

SYKRSS 3.0 Mild Steel V Band Clamp Flat Flange Kit Assembly

  • Material-Each assembly consists of two Mild Steel flanges and one 304 Stainless Steel V-band clamp. The V-band clamp design allows for a gasket free....
  • Application- The V-Band Clamps makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes and the....
  • Excellent Sealing-The V-band clamp applies uniform force around the flange maximizing the seal potential of the flanges, Once tightened, friction....
  • The 3.0" v band clamp fit for 3 Inch O.D. pipe. Of course, we can't only provide you with mild steel V band flange clamp kit, also have stainless....
  • This item is not vehicle specific. It is compatible with a wide range of applications. Please review the specifications and verify compatibility prior....
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Rainwater Collection System, Rain Diverter for 2 x 3 Inch Standard Downspouts, Rain Barrel Diverter Kit with 40 Inch Garden Hose, Rain Barrel Diverter Convert Containers Into Rain Barrels

  • 【Rain Barrel Diverter Kit】The rainwater is transferred to the bucket through the downspout diverter, and the rainwater on the roof is collected and reused for lawn and garden watering or car washing..
  • 【Quality Material】Our downspout diverter is made of durable white PVC plastic, with good impact resistance, corrosion resistance, and durability. You can use it for a long time..
  • 【Applicable Size】Designed for standard rectangular 2 x 3 inch traditional downpipe, easily installed and easy to use. (Note: Please confirm the size of downpipe before purchasing).
  • 【Easy Installation】Simply cut the downpipe section and install the fixed diverter (The package contains the assembly manual). Our diverters are equipped with sealing plugs. When you don’t need to work, you can close the sealing plug to stop the flow diversion.
  • 【Package Included】A set of rainwater collection system (including a 2 x 3in shunt, a 40in hose, 2 fixing screws and a plug). If you have any problems, please contact us in time. And we will solve them for you at the first time..
Check Stock

FULL Hotparts Turbo T4 Kit Vortec V8 LS 4.8 5.3 6.0 6.2 Silverado Sierra LSX 3"

  • 2" 304 SS heavy duty bellows | Turbo Installation Kit Included | Up-Pipe to Y-Pipe Gasket Included | Y-pipe to Turbo Clamp Included.
  • 3 Year unlimited mileage warranty | Polished Stainless Tubular Construction | Precision Built For Long-Lasting Performance.
  • Compatible with 2003-2007 6.0L Powerstroke Diesel.
Check Stock