Top Turbosmart Wastegate Springs
TiAL 002188 Wastegate Spring - Small Blue
- TiAL MV-R 44mm Universal Blue Wastegate w/ 7 Springs & Stainless Steel Flanges.
Check Stock35mm/38mm 8 PSI External Turbo Exhaust Manifold Wastegate Black
- ▶️ High Strength Cast Steel Body / Anodized Top Finish.
- ▶️ Fits any 38mm Turbo Manifold Wastegate Port.
- ▶️ Weldable Flanges for Dump Pipe / Manifold.
- ▶️ Easy to Change Springs with V-Band Clamped Top / Adjustable Top Screw.
Check StockQKPARTS WASTEGATE Replacement for TIAL MVS 38mm Black with V-Band and Flanges MV-S New
- TiAL MV-R 44mm Universal Blue Wastegate w/ 7 Springs & Stainless Steel Flanges.
Check StockPTNHZ Aluminum Car 60MM Vband V60 Flange Turbo Wastegate Compatible with BMW Subaru Honda
- Universal fitment for turbo with 60mm sizing to fit the wastegate.
- Ductile cast iron valve body to resist extreme temperatures and warping.
- White Normal Packing Box With Foam Protected.
- Includes 11 psi, and 22 psi springs (combination of 33 psi).
Check Stock38mm Bolt-on 7/13/20 PSI External Turbo Exhaust Manifold Wastegate (Black)
- ▶️ High strength cast steel body with steel head.
- ▶️ Bolt-on design, fits any 38mm turbo manifold bolt-on wastegate port.
- ▶️ Bolt-on housing design for secure spring changing and adjustment.
- ▶️ High pressure reinforced and temperature resistant actuator diaphram included.
- ▶️ Comes with 13 psi spring and 7 psi spring installed (2 springs installed for total 20 psi).
Check Stock2PCS External Wastegate Spring Replacement 8PSI + 14PSI 38mm Waste Gate Spring Carbon Steel Fit for TiAL 1Bar
- Condition:100%Brand New Aftermarket Part.
- WASTEGATE will cmpatible with TIAL MVS Black With V-BAND AND FLANGES MV-S.
Check StockGrimmspeed Manual Boost Controller - Blue
- 【Suitable For】Replacement For boost control solenoids offered by for Turbosmart, for Cobb Tuning, for AEM, for Autronic, for Haltech, for Grimmspeed and many others..
- 【Widely Applicable】The 35A-AAA-DDBA-1BA aluminum alloy three-barrel solenoid valve is Suitable For most turbocharging and supercharging applications and is compatible with most after-sales ECU programs..
- 【Adjustable Parameters】The automotive electronic boost control solenoid valve is driven by width modulation (PWM), which can stably and reliably lift the target..
- 【25.4 Ohm】The power of the electronic boost control solenoid valve is 5.4W, using a 25.4ohm coil, the vacuum can reach 120 PSI, voltage is DC 12V..
- 【Replaceability】It can be used to replace most of the boost control electromagnets, and has strong practicality. 3 port solenoid, this is the most common method for controlling boost..
Check StockTiAL MVS 38mm Wastegate w/ 6 Springs - Silver Body
- 35mm Tial / Tial-style external wastegate.
- 38mm Tial / Tial-style external wastegate.
- 44mm Tial / Tial-style external wastegate.
- Not compatible with Tial MVR and MVS wastegates.
- Colors may vary, however, psi stays the same.
Check Stock
Part# 1831383C92 GTP38 Turbo 22PSI Wastegate Actuator For 1999-2003 Ford F-250 F-350 with Powerstroke 7.3L Engine 1831383C94
- A wastegate actuator is a fairly simple piece of equipment – controls the boost output of your turbo, diverting excess exhaust gases away from the turbine wheel. it features a spring and a diaphragm. The spring holds the wastegate shut until the boost pressure reaches a set level, and then opens, allowing the gas to escape and reducing the boost pressure..
- This controls the speed of the turbine, preventing it from over-speeding, and regulating the speed of the compressor. Ultimately, this helps to protect the turbocharger from unnecessary wear and tear, by capping the maximum boost pressure of the turbo at a safe level..
- This wastegate actuator is a direct replacement for Ford Powerstroke 7.3L 99.5-03 GTP38 turbocharger, the rod of Actuator is adjustable. Ford F350 Powerstroke 1999 - 2003 year 275HP Power Stroke, Ford F250 Powerstroke 1999 - 2003 year 275HP Power Stroke..
- Customers can find the product you need accurately according to the OE number. OEM replace part number: 702011-0009, 702011-0011, 702012-0004, 702012-0005, 702012-0010, 702012-0012, 702012-5006S, 702012-5010S, 702012-9006, 702012-9010, 706447-9003, 1831383C92, 1831450C94, 1831450C91, 1831452C91, 1831383C93, 1831383C94, F81Z6K682BARM, F81Z6K682CARM. This wastegate actuator fits 99 00 ....
Check StockX AUTOHAUX 3pcs Turbocharger Actuator Wastegate Circlip E Clip Pin for Garrett T2 T25 T28
- C Clip Inner Diameter: Approximate 4.6mm/0.18".
- Great Replacement - to direct replace your old or broken clips on wastegate.
- To offer more grip on the turbo wastegate pin for greater reliability to ensure vibration, do not cause the actuator arm to shake off.
- Package Includes: 3 pcs Actuator Wastegate Circlip.
Check StockDNA Motoring WG-TL-44MM-BK 44mm Cast Steel Anodized Aluminum External Turbo Wastegate Kit w/ 14 PSI Spring, Black
- Wastegate Kit: Including Wastegate, Stainless Steel V-Band Flanges, Sealing Rings and Other Accessories(As Shown in Picture), Convenient to Use.
- Compatibility: Fits any 44mm V-Band Wastegate Port.
- Weldable Flange V-Band Flange for Dump Pipe.
- Working Pressure: 14 PSI(Spring Included).
- High Quality: High Strength Cast Steel Body / Anodized Aluminum Top Finish For Long-Lasting Durability.
- Universal Application: Great for Custom Turbo Applications or Upgrades.
- Note: Professional Installation is Highly Recommended.
Check StockGM Parts 12345982 Supercharger Gear Oil
- Fantastic design places turbo on the passenger side, very strong manifolds.
- Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock
