Top Turning Center

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock

5pcs High Speed Steel Center Drill Set, Center Drill Bits, Combined Drill, Countersink Lathe Mill Tool Set, HSS 60 Dgree 1.5/2/2.5/3/4mm for Lathe Machines & Remove Chips

  • ★【For Metalworking】These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit..
  • ★【For Conical Indentation】They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center..
  • ★【Material】Made from high speed steel, these center drill bits are of high hardness and good wear resistance.Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • ★【5 Sizes】There are total 5 pieces center bits in this set that can be used to drill holes in different sizes..
  • ★【Applications】Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on..
Check Stock

WEN 34035 6-Amp 14-Inch by 20-Inch Variable Speed Benchtop Wood Lathe

  • Attack workpieces up to 20 inches long and 14 inches wide.
  • Adjust the variable speed anywhere from 250 to 3550 rotations per minute.
  • Includes 4 inch faceplate for turning bowls, cups and other workpieces.
  • MT2 tailstock and headstock tapers, along with 1"- 8 spindle thread, allow for compatibility with a wide variety of lathe accessories.
  • Features a 6A motor, MT2 spur center, MT2 live center, 8-inch tool rest, and an onboard accessory holder.
Check Stock

Powerbuilt Crankshaft Crank Pulley Removal Tool 50mm Holder Remover and Installer Socket Wrench Honda and Acura - 648796

  • For removal and installation of crankshaft pulley bolt on most Honda and Acura engines.
  • Hexagonal shape fits hole in center of crankshaft pulley.
  • Prevents engine from turning when held with breaker bar.
  • Hole in center allows socket access to crankshaft pulley bolt.
  • Package includes usage instructions and photos.
Check Stock

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

  • 【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
  • 【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
  • 【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • 【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.
Check Stock

WEN LA3424 4.5-Amp 12-Inch by 18-Inch 5-Speed Benchtop Wood Lathe

  • Attack work pieces up to 18 inches long and 12 inches wide.
  • Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM.
  • Includes 3-1/8 inch Faceplate for turning bowls, cups and other non-spindle work pieces.
  • MT2 tailstock and headstock tapers allow for compatibility with a wide variety of Lathe Accessories.
  • Features a 4. 5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an on-board accessory holder.
Check Stock

3M FF-400-15 3M Lens Cover For Use With Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 And 403 (25 Per Bag)

  • Remove center adapter assembly by turning counter-clockwise 1andfrasl.
  • 4 turn and withdrawing from lens center port.
  • Remove the (2) Philips screws from the lens/face seal frame. Pull the frame top and bottom away from face seal.
Check Stock

Bikehand Bike Repair Stand - Home Bench Mount Bicycle Mechanics Workstand - for Mountain Bikes and Road Bikes Maintenance

  • SPECS: The Distance From The Center Of The Clamp To The Center Of The Mount Is Approximately 8" (20.5cm), The Distance From The Bench to The Center of....
  • ROTATED HEAD: Smart Design: Head Rotated:360 Degree By A Quick Release And Turning Knob. The Teeth And Clamp Are Well Made And Heavy Duty. It Could....
  • DURABLE: The Bike Work Stand Was Released To The Market For More Than 10 Years. It Has Been Approved One Of The Most Reliable And Durable Bicycle....
  • MOUNTS TO ANY FLAT SURFACE: Mounting Bolts NOT included.
  • Bikehand QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very....
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press

  • Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens..
  • The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise..
  • Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape..
  • Holds blanks up to 1-1/2" square. The pen center vise includes a scrap board piece of mdf. It measures approximately 2" by 1/4"..
  • The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. Wooden base is removable and replaceable. If you need a larger base to clamp the vise to your drill press, simply remove the wooden base and replace it with a base made to your exact specifications.
Check Stock