Top Turret Lathe Tool Holder

Mini-Lathe Tools and Projects for Home Machinists (Fox Chapel Publishing) Simple, Practical Designs & Modifications to Extend & Improve the Versatility of Your Small Metal Lathe; Over 200 Photos

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Learn to Turn, 3rd Edition Revised & Expanded: A Beginner's Guide to Woodturning Techniques and 12 Projects (Fox Chapel Publishing) Step-by-Step Instructions, Troubleshooting, Tips, & Expert Advice

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • ...sufficient quantity for more woodworking lathe projects..
  • 【Excellent Craftsmanship】The aluminum alloy handle of this carbide wood turning chisels tools for wood lathe is sandblasted, which is comfortable, durable and scratch-resistant. Square stainless steel arbor can better keep the lathe tools flat on the tool holder without rolling level with the tool holder, increasing stability..
  • 【Wide Application】This carbide tipped turning chisels set has great performance on a lot of wood turning projects of all sizes. Very simple to use, suitable for all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts..
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

Basic Lathework for Home Machinists (Fox Chapel Publishing) Essential Handbook to the Lathe with Hundreds of Photos & Diagrams and Expert Tips & Advice; Learn to Use Your Lathe to Its Full Potential

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Knurling Knurler Tool Holder 2cm/0.8inch Spring Loaded Holder Linear Knurl Tool Lathe Adjustable Shank with 4 Spare Knurling Wheels 45# Carbon Steel CR15 for 7X Mini Lathe

  • This knurling tool is made of high quality 45 # carbon steel, and the wheels are made of CR15, durable in use..
  • This knurling tool is specifically for the mini lathe..
  • Great design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool..
  • Pressure is applied via the turn screw instead of the lathe cross slide..
  • Knurling tool holder is also works with any of the quick change tool posts. This knurling tool fits in the standard tool post of the mini lathe without any modification..
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Lathe Bar Replacement, High Grip Replacement MTNL 1616 H16 Turning Tool Holder 16x100mm Cast Iron Semi-Finishing for Lathe Turning Tool Finishing

  • Lathe Tool Holder--The accessories have good steel quality and long service life, which reduces the use cost of tools..
  • Lathe Turning Tools Holder--Maintaining tight tolerances, unmatched performance and practicality, can adapt to very harsh environments..
  • Carbide Lathe Tools Holder--High grip, impact resistance and powerful, fast cutting speed, large-scale processing..
  • Carbide Turning Tools Holder--User can easily replace the clamp, only need to use a wrench to complete the replacement of the blade and the pad..
  • Metal Lathe Cutting Tools--Original standard, direct replacement for the old or broken one..
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

Indexable Lathe Turning Tool,3/4'' Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • OSCARBIDE 1/2"Shank Heavy-Duty Lathe Turning Tools Set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning holder, 1 pcs MGEHR grooving tool holder,1 pcs SER threading tool holder.
  • Turning Holders are made of high quality stainless steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools.
  • Carbide Cutters are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose metal lathes cutting action.
  • Metal Lathe Cutting Tools Overall Length: 4.
Check Stock