Top Two Injection Mold

Shure KSM8/N Dualdyne Vocal Microphone

  • Patented cartridge design features two ultra-thin diaphragms (one active and one passive) and a groundbreaking inverted airflow system.
  • Exceptional control of proximity effect greatly increases working distance without on-axis coloration.
  • Neutral mid- and high-frequency reproduction due to controlled proximity effect results in the most natural-sounding dynamic microphone available.
  • Neodymium magnet resides in a micro-injection mold of aerospace SoftMag material, maximizing the magnetic field for the highest output level.
  • Re-imagined Shure Pumping Pneumatic Shock Mount features tuned cavities, specific resistances, and precisely machined components fully integrated into the cartridge’s acoustic properties, delivering exceptional rejection of handling noise without any loss of low-frequency response.
  • Patent-pending Diaphragm Stabilization System technology protects and stabilizes the active diaphragm from unwanted movement from plosives or impact.
  • Dent-resistant, hardened carbon-steel grille design lined with hydrophobic woven fabric provides exceptional water, plosive and wind protection.
Check Stock

best_nj Premium Soft Plastiс Mold Lure Making Injection Molds Fishing Lures Two Cavity Yama Senko 5'' Aluminium

  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
Check Stock

2xhome - Set of 4 (4 Chairs in Total!), Black, Victoria Style Ghost Side Chairs Dining Room Chairs - Victorian Accent Seat - Lounge No Arm Arms Armless Less Chairs

  • Set of 4 (4 chairs in total!), Victoria ghost chairs Black chairs - Single mold injection.
  • Made from Black polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party, and matching with your dining table. Etc. Multiple colors available - Clear, Smoke, Black, White (Please see our others listing!)..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected..
Check Stock

Christopher Knight Home Dean Outdoor Plastic Chairs (Set of 2), Teal

  • MODERN STYLE: With clean, precise lines and an open-back design, this chair set is created with a chic, minimalistic aesthetic and functionality in mind..
  • WEATHER RESISTANT: These chairs are designed and tested to resist mild weather conditions. We always advise covering, storing, or providing other protection to our furniture in the event of heavy or repeated exposure to the elements, including water and UV rays..
  • POLYPROPYLENE RESIN: Created with high-quality, specially designed polypropylene, our dining chairs are made to be highly durable and weather-resistant. Using a process called injection molding, this resin is injected into a mold and cooled to harden into an incredibly durable product..
  • STACKABLE: These chairs are stackable, allowing you to place these atop one another when not in use..
  • DIMENSIONS: Each chair is 18.50" W x 22.00" D x 33.00" H. This comes as a set of two..
Check Stock

Taipan Boxing Gloves for Men & Women, Boxing Training Gloves, Kickboxing Gloves, Sparring Punching Gloves, Heavy Bag Workout Gloves for Boxing, Kickboxing, Muay Thai, MMA (16oz, Blue)

  • ...es have unique design along with sturdy strong stitches that makes the gloves durable, long lasting & ultra-resilient. Best for Kickboxing, Sparring punching and MMA-Training..
  • ★ [Material] Taipan boxing gloves are made up from premium synthetic leather, High quality injection mold padding with hook and loop closure for prefect fit..
  • ★ [Perfect Fit] Taipan boxing gloves are securely prefect fit around your wrist. Our boxing gloves are coming with Velcro wrist strap with hook and loop closures that makes the gloves non-slip and perfect fit around your wrist while heavy punching..
  • ★ [Breathable & Protective] Boxing glove have breathable 3D ventilated air cool mesh that can cool your hand and sweat free while wearing. Injection mold protective foam padding along with hook and loop closures may increases the protection level while wearing the Taipan’s boxing gloves..
  • ★ [100% Satisfaction Guaranteed] Become a part of Taipan family. We’re not happy, until our customer happy. If you are not satisfied with gloves. Please feel free to contact us. Because customer satisfa....
Check Stock

BC Airway Tubing Elbow Nylon Elbow Connector for Diving Outdoor Water Sports

  • ★During oral, nasal intubation training operation, insert the correct operation of the airway, electronic display and play music function, so the lungs inflate gas..
  • ★It can be oral nasal intubation training operations and teaching demonstration. Error makes laryngoscope cause tooth pressure, electronic alarm function..
  • ★Adopts imported PVC plastic material, stainless steel mold, injection molded by injection molding machine, with vivid image, real operation and reasonable structure..
  • ★This Adult Intubation Model is Perfect for Training and Teaching, Needed by Hospitals, Medical College, Research Center etc..
  • ★USA STOCK, delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. MONIPA are always at your service..
Check Stock

Soft Plastiс Mold Lure Making Injection Molds Fishing Lures C138

  • MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • LUBRICATION: Recommended. For best results use silicone grease..
  • DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
  • Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..
Check Stock

Dilwe Simulation Universal Tail Wing, Model Accessory Plastic Tail Wing Decoration for 1/10 Scale Drifting RC Car

  • Function: This tail can not only decorate your remote control car, but also effectively reduce the air resistance of the remote control car during fast driving..
  • High-quality Materials: This product is a high-quality mold injection molding, sturdy and durable, is the perfect choice for decorative your remote control car..
  • Easy Installation: The product includes a wing, two bases and four screws for easy installation and removal, anti-collision and non-deformation..
  • Fit For: It is universal for 1/10 scale drifting remote control car. After this rear wing being installed, your remote control car will become more beautiful and authentic..
  • Guarantee: Our product have 180 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem..
Check Stock

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

  • 1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
  • 2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
  • 3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
  • 5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock