Top Two Pieces Ball Valve

Sink Soap Dispenser Extension Tube Kit 47' with Check Valve, No Need to Fill The Little Bottle Again!

  • MAKE YOUR LIFE EASIER: With 47" sink soap dispenser extension tube kit, use the big bottle directly, no need to refill small bottles anymore..
  • HIGH QUALITY: Food-Grade silicone soap tube is soft and elastic, check valve make it easier to pump out the soap..
  • EXCELLENT DESIGN: We supply 4 multiple caps to fit most soap and lotion containers. A check valve and pp ball keep soap primed at the top of the tube!.
  • EASY TO USE: With the long hose, skipping the messy process of refilling the soap dispenser. The check valve and pp ball will keep soap always primed in your soap dispenser, so you don’t waste time pumping..
  • WHAT YOU GET:4 bottle stoppers to fit most soap containers, a check valve connect two tubes, a pp ball and 2 fastening bolts.NO SOAP DISPENSER PUMP INCLUDED..
Check Stock

Maxline M8203V Dual Outlet Kit 1' Inlet Two 1/2' Ports Line Drop With Ball Valve

  • This is a MaxLine M8203V dual outlet port with ball valve..
  • Features a 3/8" FNPT Port w/ Ball Valve (Serves as air pressure / moisture drain).
  • This port has a 1" inlet that only works with 1" MaxLine tubing..
  • It features two 1/2" outlets that come out at an angle to make adding attachments convenient..
  • This outlet block also features an inline ball valve to shut off the flow of air to the outlet as well as a twist moisture drain on the bottom to help avoid get excess water build up in your airlines. Dimensions: 3-7/8" Wide x 4-1/2" Tall x 3-1/4" Deep.
Check Stock

Motorized Ball Valve- Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid 1 inch

  • RELIABLE AND SAFE- The metal components of this ball valve are made entirely of SS304 and SS316 stainless steel.
  • NPT THREADING-1” thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the....
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

6 Pieces Tire Accessories Set Including Brass Air Chucks Closed Flow Straight Tire Chucks Tire Chuck Lock-on Clips Tire Air Chuck Adapters and Tyre Valve Stems for Bus Car Motorcycle

  • Package included: you will be provided with 6 pieces air chucks, including 2 pieces brass air chucks, 2 pieces closed flow straight tire chucks and 2 pieces tyre valve stems, sufficient quantity and sensible combination will satisfy your different demands.
  • Quality material: the tire inflator accessories set is made of brass material, sturdy and durable, not easy to deform and break, corrosion and rust resistant, which can serve you for a long time.
  • Dimension information: the tyre chuck measures approx. 5.83 x 1.18 inch/14.8 x 3.0 cm, the closed ball air chuck measures approx. 1.22 x 0.83 inch/3.1 x 2.1 cm, and the air chuck adapter measures approx. 1.69 x 1.34 inch/4.3 x 3.4 cm, detailed dimension information for you to know.
  • Easy to use: the air chuck with clip can be easily fixed to the valve stem, and the screw tire chuck can also tightly hold the tire valve to ensure sealing, the former can directly clip your car’s tank valve, and the latter need to be put on the valve and then swirl the chuck, simple operation without taking much time.
  • Wide application: the tire air chuck set can be applied for air pump and compressor accessories, and also can be applied for trucks, buses, cars, bicycles, motorcycles and more, bring convenience to your life.
Check Stock

Motorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

16 Inch Inflatable Glitter Beach Ball Confetti Beach Balls Swimming Pool Party Balls Pink Beach Sand Balls for Adult Boys Girls Summer Beach Water Play Toy, Pool Hawaii Luau Party Favor (2 Pieces)

  • What you get: package comes with 2 pieces glitter inflatable beach balls which can satisfy your needs of playing.
  • The interior of the beach ball is filled with a lot of shiny golden confetti.
  • Tip: the sequins will be put together when the ball is first inflated, you need to gently flap or rub the ball surface to separate the sequins, so that the sequins can disperse all the places where the ball will be very beautiful.
  • Glitter beach ball: the confetti-filled inflatable beach ball will make a big splash for your party or holiday.
  • The ball is very pretty and chic especially under sunshine or the spotlight, which is in line with boys, girls and adults' taste and easy to catch people's attention, adding something different and lively vibe to your party time.
  • Durable material: the swimming pool party ball is made of quality PVC vinyl, with a quick valve system, which has UV resistant to protect the inflatable ball from color fading or be broken It is built to last from one summer to the next, ensuring the long serving life.
  • Please be careful when inflating and keep it away from pointed items.
  • Easy to inflate and ready to play: you can use a pump or exhale air into the quick valve system to easily inflate the pink beach sand ball within seconds.
Check Stock

7 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R410A Adapter 5/16 Inch Female to 1/4 Inch Male Flare for Mini Split System

  • You will receive: 3 pieces angled ball valves and 4 pieces useful adapters, totally 7 pieces can meet your needs.
  • Angled ball valve: 45 degree angle manual shut-off valve with 1/4 inch male and female fitting.
  • The couplers nuts are deeply knurled for quick finger-tightening, 800 psi (55 bar) maximum working pressure and 4000 psi (276 bar) minimum burst pressure.
  • Adapter for mini split system: converts the 5/16 inch charging vacuum ports (R410a style) to accept 1/4 inch gauge hose set, 1/4 inch male x 5/16 inch female adapter.
  • This connector has a thimble, it will not open the air conditioning core tube while opreating, good to solve the problem of leakage.
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

GIYO Mini Bike Pump, Portable Compact Bicycle Pump with Pressure Gauge, Tire Repair Kit, Perfect for Presta & Schrader Frame Mount for Road, Mountain & BMX Cycling, Ball Pump with Needle 120 PSI

  • [Clever Valve System]: The handhold bicycle pump combines with automatically compatible valve fit for Scharder and Presta valves. No changing valves needed, tight with Scharder and Presta valves without air leak..
  • [Carry-easily]: Lightweight and Durable handy cycling pump is equipped with mounting bracket which can attach tire pump to your bike frame, using hook and loop strap and fixing screws securely hold the pump in place..
  • [High Pressure PSI]: The maximum volume of the hand-operate bicycle pump is 120PSI, which can be used to inflate the bicycle tires and maintain the tire pressure. PSI value can be checked by pressure gauge during the inflation process..
  • [Multiple Functions]: This air inflation pump is suitable for Mountain , Road , BMX , MTB bike , Stroller , Electric bicycle , Kids bike. Comes with ball needle inflate that also fit for Football , Basketball , Volleyball , Soccer ball and other balls..
  • [Repair kits]: Tire repair tools included with 1 piece mini bike pump, grinding tablet, ball inflate needle, velcro strap, mounting bracket, 2 pieces of fixing screws and mini pry bars, 6 pieces of tire patches..
Check Stock

CKAuto 4 Pieces TR416 Metal Valve Stems Outer Mount Fits .453\ & .625\ Rim Holes Long 1 1/2\

  • 【Package Information】You will receive 4 pieces of stainless steel valve stem extensions and 6 pieces of brass valve stem extenders in the package. Sufficient quantities can meet your daily use and replacement needs..
  • 【Reliable and Durable】Made of copper nut and stainless steel braided, the valve stem extensions are sturdy and solid, which can be used for the long term. The precise weaving technology protects the inside of the product from damage..
  • 【Universal Connector】This valve stem tool can fit 99% of the valve cores and air pumps of car models, and you can apply them on most cars with standard American tire valves, like RVs, bicycles, motorcycles, trucks etc..
  • 【Size Details】The stainless steel value stem extension equips two lengths, one approx. 7 inches and another 12 inches. And there are 3 different angles in the tire valve extension adaptor, 45 degrees, 90 degrees and 135 degrees..
  • 【Easy Installment】First screw the metal valve stem extender on your tire valve, then connect the hose to the tire inlet through the valve stem extension to inflate the tire. The right angle bend allows easy access for the pump. Easy operation..
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Exercise Ball Hand Pump Fitness Yoga Ball Air Pump Ball Inflator Pump with 2 Pieces Exercise Ball Plug Removers and 10 Pieces Exercise Ball Air Plugs Pin Air Stoppers Adapter Kit for Balls (Black)

  • Package includes: you will receive 1 piece exercise ball hand pump, 2 pieces exercise ball plug removers and 10 pieces exercise ball air plugs, which are sufficient to satisfy your needs.
  • Practical function: each pull and push of the fitness ball air pump will pump the air into the inflatable ball or device, helping your easily make the ball or device inflatable, suitable for small to medium size inflatables.
  • Air plugs and plug remover: the exercise ball air plugs can plug up the ball valves, preventing the the ball from leaking air.
  • And the exercise ball plug remover can help you easily remove the air plug from the valve when deflating.
  • Easy to store: the ball inflator pump measures 24 cm/ 9.45 in length and the exercise ball plug removers and exercise ball air stoppers are small in size, which are easy for you to store, occupying a little space.
  • Safe material: the exercise ball pump kit is made up of pp plastic, which is non-toxic, tasteless, and safe for you to use.
  • And the material is durable enough for long term use, which will not easy to breakdown.
Check Stock