Top Two Way Pipe Fitting

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

SDTC Tech 1/2

  • FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
  • PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
  • MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
  • SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
  • APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
Check Stock

CIRCOPACK UTILITY Grade 2 Inch 4-Way PVC Fitting Connectors For Use With Schedule 40, 2 Inch PVC Pipes (2 Pieces)

  • These are for use with Schedule 40, 2 inch pipes. Do note that Schedule 40, 2 inch PVC pipe has an Outer Diameter of 2.375 inches..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4-way corner fitting is commonly used to building the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings..
  • Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • These unprinted UTILITY grade fittings are an affordable alternative to the high gloss, high price, furniture quality PVC fittings..
  • This is a CIRCOPACK brand 2 piece value bundle. Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product. CIRCOPACK is a Value Emporium brand..
Check Stock

1/2\ Pipe Fitting Elbow, Home TZH DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2\)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 20 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

Home TZH 45-Degree-Elbow, Threaded Cast Black Malleable Iron Elbow for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2")

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....
Check Stock

6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse

  • PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
  • The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
  • Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
  • Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
  • Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
  • tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
  • PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
  • Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock