Top Two part Epoxy

Epoxy Putty, 120g 2 Part Fast Repair Epoxy Glue, Metal, Plastic, Wood, Glass, Ceramic Crack Filler, Heat Resistant and Waterproof (Grey)

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

SUPERCOAT Stone Gray Epoxy Floor Coating

  • Breathable two-part waterborne epoxy coating, Decorative flakes, Anti-slip aggregate, Cleaner/Degreaser included.
  • Professional grade floor covering, Easy to install, No acid etching or mechanical prep necessary in most cases, Clean with degreaser included, mix and apply with roller, Scatter flakes in wet epoxy.
  • Epoxy coating breathes allowing moisture vapors to pass through eliminating blistering and peeling, Resistant to automotive fluids, hot tire lift, Good adhesion to concrete and wood.
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2

  • No Drip Formula: Thicker no-drip gel formulation is idea for vertical surfaces and overhead repairs.
  • Fast & Easy: High-strength epoxy sets in just 6 minutes for quick repairs and fully cures in 24 hours.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

TotalBoat TotalProtect Epoxy Barrier Coat System White Quart

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray, Gallon)

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439901 TotalProtect Epoxy Barrier Coat System White Gallon

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black 25 ml

  • J-B WELD KWIKWELD: A fast setting version of The Original Cold Weld two part epoxy system that provides strong, lasting repairs to multiple surfaces....
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, KwikWeld takes 6 minutes to set and 4-6 hours to....
  • STRENGTH: J-B Weld KwikWeld has tensile strength of 3127 PSI.
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld....
Check Stock

Cup Turner Full Kit with Tumbler Turner, Epoxy Resin, Glitter Powder, Stainless Steel Tumbler and 27 PCS Epoxy Resin Tools for Glitter Epoxy Tumblers DIY Crafting

  • Good-value Full Kit – 1 x Cup Turner, 6.9 fl.oz. Epoxy Resin( Resin and Hardener ), 1 x Stainless Steel Tumbler (20 oz.), 12 x Glitter Powders and 27 x Epoxy Resin Tools, to provide you everything you want for glitter tumbler making. It’s a great festival gift to your family or friends..
  • Upgraded Tumbler Turner – Made of aluminium alloy and added anti-slip pads under the base, which is heavy enough for the cup turner machine does not move when rotated. UL certification motor with 2-way Rotation of the cup spinner is quiet and safe, and the direction of rotation can be switched by power switch! The cuptisserie turner comes with two wands and two foams, the extra replacement was a good ideal for drying cup while making the crafts mug..
  • Epoxy Resin Kit – Includes 3.45 fl.oz. Resin and 3.45 fl.oz.Hardener part, easy to mix 1:1 ratio by VOLUME, cures crystal and hard as a rock. Self-leveling, self-degassing, low-odor, nox-toxic, no fumes, resistant to yellowing from UV exposure and long lasting. The clear epoxy resin fit for all of your casting and coating applications..
  • Glitter Powder – 12 Assorted colors magic bright and bling spray shaker, non-toxic, solvent resistant, top shaker holes design, wide application in making epoxy crafts and epo....
Check Stock

Total Boat High Performance Epoxy Resin (Gallon)

  • Part 1 of a two-part, low-viscosity epoxy resin system that’s easy to use for clear coating, laminating, layups, and vacuum bagging. For use with non-blushing TotalBoat 2:1 Slow, Medium, and Fast Hardeners for curing in a wide range of times and temperatures..
  • Non-blushing formula means no time spent removing messy surface blush so projects can be finished faster. Low odor and low VOCs make it great for shop or indoor use..
  • Simple mix ratio of 2 parts resin to 1 part hardener makes it easy to get a proper cure every time, especially using TotalBoat 2:1 Pumps (sold separately)..
  • Use on properly prepared wood, fiberglass, aluminum, and steel. Clear, hard, flexible cure is great for clear coating and wooden boat building. Blend mixed epoxy resin with fillers to create a strong adhesive, fairing compound, or filleting compound..
  • Available in Quart, Gallon, and 4-Gallon sizes..
Check Stock

POR-15 Epoxy Putty, All Purpose Industrial Strength Clay Glue, Repair Putty for Car Restoration, Plumbing, Steel Metal, Concrete, 16 Ounces

  • ✅ WHY CHOOSE POR-15 EPOXY PUTTY? This powerful epoxy putty is easy to use and dries Rock Hard. It’s strong enough to withstand drilling, taping, and painting, without cracking or shrinking. Perfect for repairing all types of fiberglass cracks, holes and breaks, repairing cracked metal, steering wheel crack repair, rust pits and holes, and beyond!.
  • ✅ ALL PURPOSE EPOXY PUTTY – Easy and effective– Simply knead and roll the two-part formula in your hands or a clean surface until the putty becomes one uniform color with no visible color streaks. Our putty responds well to water when smoothing, shaping, or molding. Work with it until it is almost perfectly smooth before it dries - eliminating most sanding!.
  • ✅ TOUGH, WATERPROOF, HEAT RESISTANT, - Our two-part industrial pliable metal filler formula mixes like clay and hardens like steel. The putty is waterproof, resistant to heat, cold, most fuels, and solvents or caustic agents. After curing the epoxy putty can be sanded, drilled, routed, screwed, chiseled, surfaced, tapped, sawn, turned, filed, carved, stained or painted..
  • ✅ WHEN DO I NEED THIS? – Classic car res....
Check Stock