Top Two piece Scope Mount

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Durasight DS409B Dead On Mount

  • Dead On One Piece Ring/Base - Low Black 1"DescriptionDead On One Piece Ring/Base - Low, Black, 1"Manufacture ID: DS409BThis innovative design uses Z2 Alloy to make it the strongest mount available for your CVA rifle and scope. The DEAD-ON one-piece system is the fastest way to mount optics on your CVA rifle and will give you years of rock-solid performance. A one-piece system also means there are fewer parts than can come loose to affect your accuracy. Plus, the molded Z2 Alloy ensures better ring alignment to grip your scope tighter but with less stress on the scope tube.Specifications:- Fits CVA Apex, Optima Elite Center-Fire Barrels, New CVA Scout Rifle (all Models) and all 2010 or later Model CVA Muzzleloaders (Wolf, Optima, Accura V20Height: LowFinish: Black.
Check Stock

Valken Scope 1-4x20 w/Mount Mil-Dot Reticle

  • 4-time zoom and 4.5-5 inches of extra long eye relief. Waterproof, fogproof, shockproof: Nitrogen-filled and O-ring sealed.
  • Etched glass reticle: 20moa circle plus 3moa dot.
  • Finger adjustable elevation and windage screws.
  • Two color RED/GREEN illumination when better contrast is needed under low light conditions.
  • Scope comes packaged w/ 1 piece offset scope mount: Height 30mm.
  • Offset length: 37mm. CR2032 battery included.
Check Stock

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
  • Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Evike Airsoft – KJW M700 High Power Airsoft Gas Sniper Rifle – Take Down Model

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not be included. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange tips are preinstalled. Assembly may be required. ◙.
  • Full Metal construction with high quality polymer stock.
  • Feather light trigger pull, feather light Cycling pull.
  • Instantly take down into two pieces for easy transportation.
  • Extreme high power, great accuracy and range.
  • Model: Gun Only (Scope and Bipod not included).
Check Stock

Monstrum 3-9x40 Rifle Scope with AO Adjustable Objective | Ruger 10/22 Edition with Ruger 10/22 Dual Ring Scope Mount

  • End-to-end rifle scope solution built exclusively for the Ruger 10/22 platform.
  • Adjustable 3-9 times magnification, for targeting out to 500 yards and beyond.
  • An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Precision scope mount machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount....
Check Stock

Monstrum Picatinny Rail Mount Compatible with Stoeger M3000/M3500 / Benelli SBE/M1/M2 / Franchi Affinity 3/3.5 / Remington 7400/7600 / Weaver 93 | 0 MOA

  • Picatinny rail mount compatible with the following firearm platforms: Remington 7400/7600 | Benelli Black Eagle I/II/M1/M2/Auto/Vinci | Franchi Affinity 3/3.5 | Stoeger M3000/M3500.
  • Package includes both #6 standard screws and .335” OAL screws to match different receiver hole patterns.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum 1-4x20 LPVO Scope with MH255 Offset Scope Mount and Flip Up Lens Covers | Black

  • Tactical rifle scope providing crystal clear targeting at 1-4x magnification, with a 20mm objective diameter and an eye relief of 3.5-3.8 Inches.
  • Glass rangefinder reticle for on-the-fly range estimation and long distance targeting.
  • Lever controlled reticle illumination in both red and green with multiple brightness intensities.
  • Product Bundle includes Monstrum H-Series One Piece Offset Scope Mount.
  • comparable in weight to a pair of scope rings while maintaining the added rigidity and convenience of a one piece mount.
  • Includes hardened steel Torx mounting hardware for mounting to any Picatinny rail platform..
  • Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.
Check Stock

Wheeler 1-Piece Bolt Action Scope Mount - 30mm High Scope Mount for Remington 700 Long Action Rifles - 6-Hole Design with Integral Rings and Anti-Cant Indicator for Leveling and Shooting

  • SPECS: This Wheeler 1-piece bolt action scope mount with 30mm rings in high height is compatible with Remington 700 long action rifles. Base features 6-40 threads.
  • ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances..
  • CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount..
  • DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design..
  • EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models..
Check Stock

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

  • This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock