Top Two sided Holder

Rollator Walker Cane Holder, Adjustable Crutch Bracket for Wheelchairs, Rollators, Knee Scooters

  • Cane holder no more picking up your cane or crutch from the ground. Your cane or crutch is always by your side, standing up! and enjoy having your cane by your side at all times!.
  • Make of plastic, uniquely manufactured with high quality. It's strong grip will hold your cane in place!.
  • Easy to install: Cane holder with two screws to ensure easy assembly and adjustment. Wether you want to transfer the holder from the wheelchair to the walker or vice versa it will be as easy as 1 2 3!.
  • Package include: 2 Pcs walker cane Holder and 4 Pcs screws. NOT INLCUDE the crutch. Good use for most walkers, wheelchairs, rollators, and knee scooters, crutches..
Check Stock

Cliff Keen Wrestling Headgear Two Slot Strap Holder

  • To fit onto headgear: Remove one side of the top two straps from the shell of the headgear by slidin.
  • Slide each strap individually through the Head Gear Strap Holder. Note, the holder is intentionally.
  • Simply apply small amount to straps before inserting into strap holder and wipe clean.
  • Once Holder is in place, slide straps back into shell of headgear and tighten straps to a snug fit.
Check Stock

Car Cup Holder Expander with Offset Adjustable Base, Compatible with Yeti 20/36/40oz, Hydro Flasks 32/40oz, Fits Most Cup Holder, Diameter Bottles in 3.4"-4"

  • 【UPGRADED OFFSET BASE】CYEVA newest cup holder expander for car features an Offset Base, which perfectly fits for more different types of original car cup holder. It is compatible with the gear shifter, center console lid, car dash, other center console buttons and allows two cup holders to be placed side by side..
  • 【SECURELY HOLD 3.4"-4" DIAMETER BOTTLES】Our cup holder expander works perfectly with most popular brands bottles of 18-40 oz and drink cup & coffee mugs in 3.4"-4" diameter. It is compatible with Hydroflask 32/40oz, Yeti 20-36oz, Nalgene 16-40oz, Yeti Rambler 10/14oz, etc..
  • 【EXTENDABLE BASE】Just twist the top of the adapter to expand or retract the base. Insert is expandable from 2.5"-3.75" in diameter to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder..
  • 【6 PC RUBBER TABS DESIGN】The rubber tabs around the top of the car cup holder hold the cup firmly in place without tipping or spilling when driving down the road. The tabs are made o....
Check Stock

Teskyer 2 Pack Leather Badge Holder, 2 Card Slot ID Badge Holder with 19\ Neck Lanyard, Vertical Style, Rose Gold and Black

  • 【What you'll get】-2 pcs Vertical leather ID card badge holders, 1 black and 1 rose gold, and 2 skin-friendly durable nylon neck lanyards. Get two colors premium badge holder with a beautiful price!.
  • 【Product features】-This Teskyer Badge Holder has 1 Clear ID Window on the Front Side and 1 Card slot on the Back Side, and 1 piece detachable Lanyard. simple& beautiful& useful& reliable is Teskyer's Belief..
  • 【Top material】-The Badge Holder is made of PU leather, compared to the plastic material, PU leather is much more durable and last longer. A reliable stainless steel lock catch can make sure the holder will not dropdown..
  • 【Product size】-The Badge holder size is 2.83"x4.53" (72x115mm) and the window size is 1.73"x2.99" (44x76mm), the lanyard Dimension: 19"x0.5" (480x12mm) approximately..
  • 【 Applicable scenes】-This badge holder can be perfectly used for businessmen, staff, students, teachers, doctors, couriers, waiters, etc. wherever needs a high-quality badge holder, this Teskyer badge holder will definitely be your best choice..
Check Stock

Portable Speaker Mount for Bike Golf Cart Accessories UTV Boat Railing, TXEsign Metal Bike Speaker Mount Strap Bike Speaker Holder Speaker Strap Speakers Attachment Accessory Holder Bar Rail

  • Bike Speaker Mount: This speaker holder is designed for riding, golfing and boating. Quickly attaches Bluetooth speaker to rail like golf cart, boat, bike, motorcycle etc. Very easy and convenient to take speaker when go out..
  • Adjustable Size: Two short straps fit portable speakers with a circumference of 2.15-10.99 inches and length above 6.3 inches. Long straps for attaching the mount to the bike tube, fit railing/bar with a circumference of 3-11 inches. Fit most cylindrical and rectangular speakers. Compatible with JBL Flip 4 Flip 5 Flip 6 UE Boom 3 etc..
  • Sturdy Metal Bike Speaker Holder: Made of durable metal, hold speaker firm during fast riding & bumpy trails. Making it great speaker holder for road, mountain, hybrid, touring & electric bicycles.
  • Easy to Use: Easy and convenient to install on and put off. No tools needed. Two short straps pass through the hole on both side then back on itself for a secure holder. Long straps pass through the other side buckle then back on itself..
  • Package Included: 1X Portable Speaker Mount. This speaker mount can be used as bottle holder, fit most size bottles. The contact points have anti-slip mat, prevent any damage to your bike..
Check Stock

Upgraded Car Cup Holder Expander Adapter with Offset Adjustable Base Compatible with Yeti 14/24/36/46oz Ramblers Hydro Flasks 32/40oz Other Large Bottles Mugs in 3.4 -4.0

  • UPGRADE VERSION: Seven Sparta Newest cup holder expander uses a Offsetting Base to avoid the lack of space , two cup holders can be used side by side.....
  • FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4"-4": Car cup holder expander is big enough for oversized thermoses, it also can work with most....
  • EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Car cup holder adapter comes with a base that expands to fill the console cup....
  • SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car drink cup holder built with solid and thick plastic and the rubber tabs around the top of the....
  • LARGE SLOT FOR MUGS: It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your....
Check Stock

Graintex PL45S 10-Pocket Nail and Tool Pouch with Embossed Leather Belt

  • GENUINE LEATHER: : Tool pouch with belt is made from 100% genuine suede leather.
  • MULTIPLE POCKETS: : This tool pouch has one main pocket, one medium front pocket, two belt level inner pocket and three small pockets on each sides.
  • WIDE BELT TUNNEL SLOT: : The tool pouch has 2. 3/4" wide belt tunnel slot. It can easily fit up to 2. 3/4" wide belt.
  • HAMMER & MEASURING TAPE HOLDER: The tool pouch has one hammer holder on one side fits all standard hammers. On one side the tool pouch has a metal measuring tape clip holder that fits all standard measuring tapes.
  • FITS WAIST SIZE 28" to 48": : The leather belt fits waist size 28" to 48" and the belt has single needle roller buckle.FINELY STITCHED AND RIVETED: : This product has been finely stitched and reinforced with rivets for extra strength and durability.MAKES A GREAT GIFT: : This product can be a great gift for anyone and everyone.TOOLS NOT INCLUDED.
Check Stock

Darware Ice Maker Scoop w/Holder 2-Piece Set Scooper Accessory for Counter Top Ice Makers and Machines

  • UTILITY SCOOP: Small scoop with stainless steel holder combo for use with your automatic ice machine or portable ice maker.
  • SANITARY: No more leaving the scoop on dirty surfaces, now safely stored in its own cage-style holder.
  • MULTI-USE: Great for home ice maker, wet bar,....
  • SIZE: holder is 5 inch tall by 2.6 inch across by 2.4 inch deep.
  • noTE: Size is intended for pellet or nugget ice makers,....
  • EASY INSTAll: Comes with two 2-sided stickers for easy install on the side or front of your countertop ice maker or wall mount.
  • MATERIAL: Stainless steel holder with sturdy plastic scoop, noT intended for commercial use, small scoop intended for home countertop ice maker use.
Check Stock

Upgraded Car Cup Holder Expander Adapter with Offset Adjustable Base, Compatible with Yeti 14/24/36/46oz Ramblers, Hydro Flasks 32/40oz, Other Large Bottles Mugs in 3.4\-4.0\ (2)

  • UPGRADE VERSION: Seven Sparta Newest cup holder expander uses a Offsetting Base to avoid the lack of space , two cup holders can be used side by side. Compatible with the gear shifter, center console lid, car dash and other center console buttons..
  • FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4"-4": Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4"-4" diameter..
  • EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Car cup holder adapter comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts..
  • SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car drink cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road..
  • LARGE SLOT FOR MUGS: It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your water bottle..
Check Stock

Wooden Coffin Incense Burner - Vines 12' - Brass Inlays - Storage Compartment

  • There are two plates for cone incense and two holes on the side for sticks..
  • These are made in India and can have some variations..
  • Twelve inch wooden coffin style incense burner/holder from India..
  • Inlays on the sides and a "hidden" compartment in the bottom that opens up for storing incense..
Check Stock

KOSIBATE Shotgun Shell Holder,for Airsoft Remington 870 12G 12 Gauge/20G 20 Gauge Tactical Molle Desert Camo Design …

  • 【SUPERIOR MATERIAL】 Made of high quality 900D nylon material,sturdy and durable.Foldable quick-access design tactical shotgun shell holder ..
  • 【USEFUL DESIGN】 6 horizontal rows with 4-loops per row and 1 additional shell loop between the last two rows,most compact way of carrying 24 rounds of 12 gauge or 20G 20 gauge for 870 shotgun shell holder .You can access the first eight rounds without having to open the entire shotgun shells pouch.Hardened sides for extra protection..
  • 【Dimensions】 Airsoft shotgun shells holder: 8" long x 4.5" wide x 2"high, open it's 17 inches long(not including flap)..
  • 【MOLLE COMPATIABLE】 2x durable PALS with snap fastener. 3x2 back MOLLE straps ,side saddle velcro design,this 12g shotgun shell holder easily attach to vest,range bags, shotgun scabbard or bugout backpacks.
  • 【GUARANTEE】 Kosibate offers life time warranty on our shotgun shell pouch, guarantee with 100% satisfaction service.
Check Stock

Wisdompro Business Card Holder 2-Sided PU Leather Folio Pocket Slim Name Card Wallet Case with Magnetic Shut for Men and Women - Black

  • 2-sided business card holder, fits maximum card size: 3.6"x2" (91x53mm). Approximately Holds up to 20 business cards.
  • Holder is made of premium and durable PU leather.
  • Two pocket and magnetic shut holder design, ensure the cards stay within the case will be completely protective.
  • Unique and novelty looking, small and thin, also can be used as a credit card holder, ID card holder, bus card holders, etc..
  • 1pc high quality PU leather business name card holder.
Check Stock