Top U Plate Jack

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Acacia Hardwood Interlocking Deck Tiles - Walnut Straight - 12\×12\ 9pcs - Floor Tiles for Patio and Deck Use Natural Wood Outdoor Decking and Flooring, Rain and Weather Resistant, Heavy Duty

  • ... Kit brings crooked, warped, or bowed flooring strips into place for fixing and holds them in place during installation.
  • Flooring jack laminate jack is not for lifting.
  • [For Any Floor Thickness]: Laminate flooring jack features universal adjustable length from 14 to 16.7 inches (35.5-42.5cm).
  • 13 x 0.9 x 0.6-inch (33 x 2.4 x 1.4cm) rack.
  • 1.1 x 4.25 x 1.9-inch (2.9 x 10.8 x 4.8cm) rack plate.
  • 3.9 x 8 x 0.2-inch (9.8 x 20.3 x 0.5cm) lifting plate.
  • [Easy to Use]: Place flooring wall jack against wall or wall-stud.
  • Use locking ratchet to push or pull flooring strips into place (ratchet downward to force, push lever up or forward to release gear drive mechanism).
  • [Prevent Injury]: Keep hands free when nailing hardwood flooring with floor jack hardwood jack.
  • Nail or glue down flooring strip when starting at straight line.
  • Additional force can be applied if straightening.
  • To release flooring jack install for wood, raise handle fully forward to disengage pawls and manually retract bar.
  • [Quality You Can Trust]: No need to worry about professional hardwood floor jack falling apart under pressure.
  • Flooring jack positioning tool constructed from steel with hardened gear and spring-loaded ratchet mechanism fo....
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

KUAFU Jack Plate Adjustable 8'' Outboard Boat Jack Plate Aluminum Manual Power-Lift

  • The outboard jack plate is the perfect solution for long shaft engines with a short shaft transom. The jack plate allows the boat to navigate in shallower waters, which is difficult for a normal engine to do. It also reduces fuel consumption and gives you a good value for money..
  • The outboard jack plate is made of stainless steel fasteners for maximum strength and durability. Durable, anti-wear and anti-rust, not easy to damage, so that you do not need to worry about the problem of broken or rust in daily use..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable Vertical movement,8 inches of setback, Weighs 32 lbs, 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding..
  • The size can be adjusted according to your needs. Item type: Outboard Jack plate.
  • Feature: Color: Sliver, Material: high strength polished Aircraft Quality Aluminum, Condition: New..
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee..
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

HDMI Coax Wall Plate 1 Port 4K HDMI Keystone Female to Female 1 Port F Type Connector Coax Keystone Female to Female Wall Plate - White

  • Completely Assembled Wall Plate - The wall plate and keystones have been assembled already, You can install it in the wall directly. No need to....
  • Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and back.Then....
  • Convenient usage - This wall port jack is the perfect solution for connecting TV boxes, Router or other Coax/Ethernet Channel-enabled devices to your....
  • COMPATIBLE WITH [email protected]: HDMI Wall Plate is compatible with [email protected] for your high-resolution needs..
  • Package Contents:2 Port Wall Plate + HDMI Keystone Jack + Coax Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock

Phone Coax Wall Plate - 1 Port RJ11/RJ12 Cat3 Keystone 1 Port Coax F Type Connector Wall Plate - White

  • Completely Assembled Wall Plate - The wall plate and keystones have been assembled already, You can install it in the wall directly. No need to....
  • Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and back.Then....
  • Convenient usage - This wall port jack is the perfect solution for connecting Phone and TV box to your other devices..
  • Phone keystone is compatible with standard RJ11/RJ12 Phone Cable. Coax keystone is compatible with standard Coax RG6 Cable..
  • Package Contents:2 Port Wall Plate + 1 x Coax Keystone Jack + 1 x Phone Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock

DISENS Guitar String Retainer Roller String Tree Guides,Loaded Jack Socket Plate and Neck Plate Black,Electric Guitar Hardware Set with screws

  • These guitar replacement set made from metal with mounting screws, ready for use.
  • Boat style guitar jack plate,a superior quality replacement output jack plate socket for guitars,Ideal for Strat style guitar.
  • Use this guitar roller string trees will improve tuning stability with tremolo use, much easier tuning as they roll with the string tension.
  • DISENS guitar string tree guides prevent wear and tear on the strings which results in longer string life. Great replacement for your broken, dirty or old string retainer.
  • Package Included: 2pcs guitar roller string tree,1pcs guitar loaded jack socket plate,1pcs guitar neck plate,come with mounting screws.
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...are lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not in....
Check Stock

Cable Matters 10-Pack Low Profile 4-Port Cat5e, Cat6 Keystone Jack Wall Plate in White

  • 4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
  • Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location using a low voltage mounting bracket.
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
  • Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.
Check Stock

Leviton 41080-4WP QuickPort Wallplate, Single Gang, 4-Port, White

  • All Quick Plates have a pleasing matte finish.
  • Robust one-piece wall plate and lead-frame jack design.
  • Includes captive screws painted to match wall plate color.
  • All QuickPlates have a pleasing matte finish.
Check Stock

VCE 2 Port Keystone Wall Plate UL Listed 10-Pack Single Gang Wall Plates for RJ45 Keystone Jack and Modular Inserts White

  • 【2-Port Wall Plate】VCE 2-port wall plate for keystone jacks creates a A/V cable patch location for a home theater media center or office....
  • 【Keystone Wall Plate】Allows for any type of standard keystone jacks to be mounted which will easily snap into the wall plate , These faceplates....
  • 【Tool-Less Connection】Keystone jack insert wall plate can easily snap-in 2 port wall plate，ensure a secure and corrosion free connection,easily....
  • 【UL Listed Wall Plate 】Standard size with mounting screws, re-usable keystone jack inserts can be easily disconnected and relocated when upgrading....
  • 【Package Content】10 Pack white wall plates per bag with 20 mounting screws.
Check Stock