Top U bolt Clamps

CEE 10Pack M8 x 250mm Fully Threaded Rod Stud 304 Stainless Steel 5/16\ x 10\ Long Threaded Screw, Right Hand Threads, M8-1.25 Thread Pitch

  • Material: 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Package including 10 pcs Threaded Rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Applications : Anchor bolts, clamps, hangers and U-bolts and many more projects.
Check Stock

Squirrelly 4 Inch Heavy Duty Stainless Steel with Rounded Band Edges T-Bolt Clamp Turbo Intake Soft Hose Intercooler

  • Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
  • Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
  • These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
  • Clamp sizing: 104mm-112mm // 4.09" - 4.40". Fits 4" outside diameter..
Check Stock

Antenna Mast Clamp Cross-Over Bracket Kit with U Bolts for 1'-1.8' OD Poles, Heavy Duty Antenna Pole Mounting Hardware for MINO Yagi TV Antennas, Security Camera, Weather Station

  • Important: Only Clamps, Poles are not included!.
  • [Easy to Install] Mount 2 antenna mast poles at a 90°(cross or T shape) firmly, V jaw blocks and U-shape bolts would prevent it slip down..
  • [High Quality Made] Made of Q235 low carbon alloy steel that could effectively prevents rusting, and it is galvanized which provide oxidation and corrosion proof..
  • [Widely Used] Long time service antnena pole mount that suitable for mino antennas, yagi antenna, TV antenna, weather station, security camera, solar panel, LED street light etc..
  • [Heavy Duty Hardware] 3mm thick steel plate for heavier mast and not easy to be bent, can strongly against winds and extreme weather to keep your device safe. The entire hardware can be used for poles 1"-1.8" in diameter.
  • [Package Included] The package contains 1*steel plate, 4*U-bolt, 8*nut, 8*washer, 8*grommet. If you have any issues about it, contact us freely..
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 70mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 80mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Kyostar 2\ T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2 inch (53mm - 61mm)

  • Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
  • T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
  • Superior welded construction, Floating bridge liner..
  • Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..
Check Stock

20 Pack Round U-Bolts 35mm Inner Width fit OD 1-3/8 Pipe,Heavy Duty Steel M7 Round Bend U Bolt Pipe Clamp with Nut Plate Washer

  • Carbon steel Q235B, surface electro-galvanized, anti-corrosion, anti-rust.
  • The inside diameter of the U is 35mm for OD 1⅜" Pipe.The threads are 1⅝" in length..
  • Product size: 3"×2⅜"×1"(75×62×25mm), Thickness :2.9mm, diameter : φ7mm.
  • U pipe clamps used to fix or connect the locked parts to pipes, wood, etc. Suitable for boats, plumbing, and other home and industrial applications..
  • Package Content: 20xU-Bolt, 40xWashers, 40x Nuts, 20x Frame.
Check Stock

SINJEUN 15 Pack 3\ Stainless Steel T-Bolt Hose Clamp, Clamp Range 89mm-97mm, 304 Band Floating Bridge and Nylon Insert Locknut, Fits 3 Inch Hose ID

  • QUALITY & LEAK-PROOF - The stainless steel hose clamps are made from corrosion-resistant stainless steel with rounded band edges that prevent hose materials from cuts. Sturdy welded construction plus floating bridge liner design provides leak-proof connections for seamless joint applications..
  • SUPERIOR DESIGN - The T-bolt style hose clamps are interchangeable with the more common worm style but rely on a nut and bolt for adjustment/tension rather than threads on a screw. This t bolt clamp works much better and won't damage your hoses like a typical hose clamp..
  • HOW TO CHOOSE - Please check your hose OD diameter and make sure it is in the working range of 89mm-97mm(3.5-3.82 inches). Usually, a 3-inch water hose means its' ID size is 3 inches, but the thickness in different standards is much different, it leads the OD is much different accordingly. Please select appropriate T Clamps based on your OD size..
  • WIDELY USED - Our bolt hose clamps work well for firm plastic and rubber hose and tube in air intake systems, cold side charges air hose connections, and various hose, pipe, and ducting joints, air-intake, and coolant systems for high-performance vehicles, construction equipment, truck, and bus engines..
  • BUY WITH CONFIDENCE - We stand by the quality of o....
Check Stock

U-Bolt Exhaust Muffler Clamp, Stainless Steel Heavy Duty, Saddle Design with Reinforced Ribs, Universal Silencer Exhaust Clip (2.55 inch)

  • ...your different needs, we have 4 different sizes for you to choose from: 1.88 inches, 2.12 inches, 2.36 inches, 2.55 inches. You can choose the appropriate size according to your actual needs. We recommend that you check the dimensions of the pipe carefully before you buy..
  • 【Practical Accessories】: U-bolt exhaust clamps are widely used for sealing muffler inlet/outlet, elbow joints, pipes, and repairing exhaust systems. The excellent sealing makes it effectively prevent waste and noise leakage..
  • 【Easy to Use】: Please be assured that it is very easy to install and can be done quickly without any soldering. In addition, it can be disassembled and reused, making it the most practical assistant in your toolbox..
  • 【Purchase Hassle Free】: The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts. We test every item and ship it only after 100% guarantee in good condition. For technical, installation and usage questions, please feel free to contact us..
Check Stock

BATONECO 10Pcs T-Bolt Clamps Turbo Intake Intercooler Hose Clamp Spring Loaded Stainless Steel 83-91mm 3.27 -3.58

  • ♛[High Quality material] T-bolt clamps use heavy duty 304 stainless steel and zinc coated nuts.Offering high tensile strength, durability,corrosion resistance and wear resistance.Enhances the service life of the product..
  • ♛[Details of protecting hose ] T-bolt clamps has widen and thicken rounded band edges to protect soft hose materials from cuts. Self-locking nut can prevent the hose clamp from loosening, realize the leak-proof effect, and maximize its fastening effect. T-bolt clamps can achieve the best effect..
  • ♛[Universal application] Perfect choice for medium and high boost applications. Works great for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.Can be disassembled and installed repeatedly..
  • ♛【Size Details】 10 pcs Spring loaded T-bolt hose clamps set.Clamp Range 83 mm-91 mm or 3.27"-3.58". Please refer to the size picture for more size details before purchase..
  • ♛【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions,Please feel free to contact us. We would work out satisfactory solution to all your problems. 24 hours quick response..
Check Stock