Top Updated Grille Design

Shure PGA56 Dynamic Microphone - with Cardioid Pick-up Pattern, Swivel-Mount Dynamic Snare/Tom Microphone with AP56DM Drum Mount (PGA56-XLR)

  • Tailored microphone cartridge design for clear reproduction of sound source.
  • Swivel joint with quick release latch with a design similar to bicycle component-locking technology for extremely quick and easy positioning.
  • Cardioid polar pattern picks up audio from the source while rejecting unwanted noise.
  • Updated industrial design with black metallic finish and grille for unobtrusive visual presence.
  • Drum mount included for quick attachment to drum rims, no additional mic stand required.
Check Stock

Shure PGA58 Dynamic Microphone - Handheld Mic for Vocals with Cardioid Pick-up Pattern Discrete On/Off Switch Stand Adapter and Zipper Pouch PGA58-XLR

  • Tailored microphone cartridge design for Natural clarity in the Frequency range of vocal performance.
  • Cardioid polar pattern picks up audio from the source while rejecting unwanted noise.
  • Updated industrial design with black Metallic finish and grille for unobtrusive visual presence.
  • Three available options: (1) with 15-foot xlr-xlr Cable, (2) with 15-foot xlr-qtr Cable, and (3) without Cable.
  • On/off switch for discrete control of microphone operation.
Check Stock

Lone Dimension (H.O.T Tribal Mix)

  • SIZE – 24w X 30h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.5" Width X 31.5 Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE..
  • Weather and Pest Proof – These Louvers are especially designed to prevent water from entering your home, and with a built-in back 3/16” mesh they also protect you from annoying rodents like mice, rats, birds, and squirrels.
  • High Quality Aluminum – The premium durable Aluminum will Never Rust and it will never wear through leaving the material with an elegant, beautiful, and smooth surface, adds a luxurious touch to any home..
  • Rigid Built For External Use – The sturdy and rigid design features noise free components that eliminates vibration and excess noise to the Louvers. These are built Heavy Duty for installation into brick and cement walls..
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home.
Check Stock

24\ X 12\ Steel Return Air Filter Grille for 1\ Filter - Easy Plastic Tabs for Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 25.75 X 13.75]

  • 24"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X 13.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY.
  • High Quality Solid Stamped steel - No Sharp Edges.
  • Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open..
  • Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter.
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality - 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home.
Check Stock

36" X 24 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - Ceiling Recommended - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 38.5 X 25.75]

  • 36"w X 24"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 38.75" Width X 26.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches.
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • UNRESTRICTED AIRFLOW For Your HVAC System - Noise Free Components - No Vibrating Louvers Etc..
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality - 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home.
Check Stock

ICARS Matte Black Shark Grill Front Cover for 2007-2018 Jeep Wrangler JK JKU Accessories & Unlimited, ABS

  • ☑US DESIGN PATENT:If you want a unique aggressive look and well-constructed front grille for your Jeep Wrangler JK/JKU, the Shark Grille is a perfect choice. This shark grille features an angry eye look, aggressive open grille and cutouts for headlights and turn signals. A diamond-cut design above the shark teeth provides better protection in all aspects..
  • ☑QUALITY ABS CONSTRUCTION:Designed its grille using high quality thermoformed acrylonitrile butadiene styrene (ABS). This grille is extremely durable and can hold up against the elements and the hazards of off-road driving. At same time,Protect your radiator from debris while on or offroad, perforated design allows airflow to your engine and radiator for optimal performance..
  • ☑FITMENT:2007 – 2018 Jeep Wrangler JK JKU ( Sports, Sahara, Freedom & Rubicon )..
  • ☑EASY INSTRALLATION:With holes cutout for headlights and turn signals. Easy to install,no drilled, perfectly match with original mounting holes.And have a related customer service to guarantee you easily install.(Package include instructions).
  • ☑PACKAGE:1xJeep Wrangler JK Grill Cover，assembly screw set,anti-vibration strip and instructions..
Check Stock

EAG Rivet Stainless Steel Wire Mesh Grill Insert Fit for 10-13 Tundra

  • RIVETS - Elegant chrome studs / rivets enhanced rugged off-road appearance..
  • INSTALLATION - Cut out the factory grille insert for installation. All necessary hardware is included..
  • DESIGN - Customerized design following OE grille, produced ..
  • MATERIAl & FINISH - 100% 304 stainless steel mesh grille insert. Fully formed woven mesh grille. Black textured powder coat finish for corrosion protection and durability..
Check Stock

Shure PGA27 Condenser Microphone - Large-Diaphragm Side-Address Mic for Vocal/Acoustic Recording and Live Performance with Cardioid Pick-up Pattern Shock Mount and Carrying Case No Cable PGA27-LC

  • Large diaphragm cartridge provides wider dynamic range for clear highs and strong lows.
  • Cardioid polar pattern picks up audio from the source while rejecting unwanted noise.
  • Updated industrial design with black metallic finish and grille for unobtrusive visual presence.
  • High-pass filter for additional control of unwanted low-end signal.
  • -15dB switchable attenuator for additional SPL versatility.
Check Stock

APS Compatible with 2014-2015 GMC Sierra 1500 Upper Billet Grille Grill Inserts G65972A

  • 【INSTALLATION】This is Bolt Over/Overlay/Bolton (Drilling Not Required) 8x6 Horizontal Billet grille insert. OE grille shell remains on the car after installation..
  • 【CUSTOM FIT】Compatible with GMC Sierra 1500 2014-2015 Not For Denali And All Terrain Package.
  • 【SPECS】Each grille made from premium Stainless Steel SS and customized to fit the Main Upper of your vehicle. All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included..
  • 【PERFECT DESIGN】Each grille made from premium stainless steel with polished surface that offers long lasting shine. This grille enhances the visual appearance of your car..
  • 【SATISFACTION GUARANTEED】If the car grille has any quality problem, please feel free to contact us. We will solve your problems with professional and sincere service..
Check Stock

T-Rex Grilles 2015-2020 Colorado Billet Grille Polished 2 Pc Overlay - PN #21267

  • Lifetime Structural Warranty Classic Horizontal Design 6061/6063 Billet Aluminum High Polished Finish.
  • 3 Year Warranty On Finish Complete Hardware Kit Included Industry Best, Full Color Instructions Included.
  • 2 Pc Overlay - Grille mounts over factory grille Matching Bumper Grille available, see part number 25267.
  • Does not include T-Rex Logo Grille designed with logo opening, Chevrolet logo not included.
  • Does Not include factory grille assembly.
Check Stock

EAG Grille Rivet Stainless Steel Wire Mesh Grill Insert Fit for 2016-2022 Tacoma

  • MATERIAL - 100% 304 stainless steel mesh grille insert. Fully formed woven mesh grille. Black textured powder coat finish for corrosion protection and....
  • DESIGN - Customerized design following OE grille, produced ..
  • FUNCTION - Elegant chrome studs / rivets enhanced rugged off-road appearance..
  • INSTALLATION - Cut-out the factory grille insert for installation. All necessary hardwares are included. Note: If your vehicle has a sensor in the....
Check Stock

Perfit Liner New Front Upper Chrome Black Grille Grill Compatible With SCION tC Fits SC1200104 5310121070

  • 【INSTALLATION】This is Bolt Over/Overlay/Bolton (Drilling Not Required) 8x6 Horizontal Billet grille insert. OE grille shell remains on the car....
  • 【CUSTOM FIT】Compatible with Scion TC 2005-2010.
  • 【SPECS】Each grille made from premium Stainless Steel and customized to fit the Lower Bumper of your vehicle. All necessary hardware and....
  • 【PERFECT DESIGN】Each grille made from premium stainless steel with black powder coated surface that offers resistance to oxidization. This grille....
  • 【SATISFACTION GUARANTEED】If the car grille has any quality problem, please feel free to contact us. We will solve your problems with professional....
Check Stock