Top Upgraded Extruder

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

  • Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
  • Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
  • Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
  • Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
  • Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mainboard with Metal Extruder Frame Use Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard : Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Semi-Assembled Kits: Creality ender 5 pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard V4.2.2: Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110¡æ in 5 minutes..
  • Semi-Assembled Kits: Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm

  • 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with du....
Check Stock

Creality CR-10 V3 3D Printer New Version with Titan Direct Drive Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm

  • Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament....
  • Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down....
  • Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm....
  • All Metal Frame and Triangle Stable Structure : It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that....
  • 24V/350W Meanwell Power Supply: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid....
Check Stock

Creality Ender 3 Direct Drive Upgrade Kit, Ender 3 Pro/Ender 3 V2 Direct Drive Extruder with 42-40 Stepper Motor, Hot End Kit, Fan and Cables, Support BL Touch

  • Upgraded 3d printer extruder for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the ”Your Orders“page. We will respond with 24 hours..
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion..
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments..
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant..
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble..
Check Stock

FlashForge Creator 3 Pro Independent Dual Extruder 3D Printer

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

Creality Ender 5 Pro 3D Printer 32-bit V4.2.2 Silent Mainboard DIY FDM Printing Powerful Filament Extruder Resume Printing Cubic Structure High Precision Print Size 8.7x8.7x11.8 inch

  • 【US Engineer Professional Tech Support Safe Buy】100% Original Factory CREALITY Ender 5 Pro 3D Printer, we got U.S. Engineers Tech Support and....
  • 【Upgraded Ultra Mute Mainboard】Ender 5 Pro 3d printer equipped with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, always ensures smooth....
  • 【Double Y-axis】Ender5 Pro has double Y-axis control system with synchoronus operation and stable output to avoid vibrations resulting from....
  • 【Metal Extruder Kit】Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving the printer's....
  • 【Why Ender 5 Pro?】Enhanced safety, more silent printing performance as well as a combination of DIY fun and whole machine stability with high....
Check Stock

Creality Upgrade Ender 3 Extruder Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer

  • Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender....
  • Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive..
  • Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking..
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their....
  • Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install..
Check Stock

The Right to Bear 3D Printers

  • 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
  • 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
  • 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
  • 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

  • 【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
  • 【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
  • 【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
  • 【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
  • 【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....
Check Stock