Top Upholstery Tack Hammer

VERCCA Upholstery Staple Remover, Staple Puller, Tack Lifter Tool with Double Pronged Head Nail Remover for Furniture Carpet Floor Carton Photo Frame Office 2pcs

  • Double Pronged Head Design: The upholstery staple remover is designed with ultra sharp double pronged tips, allows you to wedge under and pull out the deeply embedded staples or any stubborn fastners without damage the surface.
  • Ergonomic Handle: The staple puller comes with a curved plastic handle, the tack remover has a multisided handle with non-slip design to keep from rolling, super light-weight, you can handle this upolstery tool with ease.
  • Easy to Use: This upholstery tool has a leverage design with 15 degree bend and it is just the right amount for you to pull out any staples, tacks or nails quickly and easily, protect your hands from stress or pain, save your time and effort.
  • Premium Quality Construction: The Staple Remover is made of hardened steel with quenching treatment to enhance its strength, will not bend or chip.
  • The tack lifter has excellent rust-resistance and long lasting performance for your daily reupholstery.
  • Functional and Versatile: This upholstery tack lifter is ideal for carpenter, handyman, professional or amatuer to remove staples or nails from furniture....
Check Stock

HammerMaster | Hammer Holder Loop - Clip-On Tool Belt Holster Holds Hammers, Hatchet, or Mallet

  • WORK LIGHT AND FAST | Carry your hammer, hatchet, or mallet in this lightweight, minimalist loop that clips easily on and off of your belt, pockets, or tool bags..
  • EASY TO CLIP-ON/OFF | Fits belts and straps up to 1.75" (45mm). Doesn't need to thread onto your belt. Take it off quickly when you're done working or getting into a vehicle..
  • WORKS WITH A WIDE RANGE OF HAMMERS | Firmly holds a framing hammer, sledgehammer, hatchet, ax, rubber mallet, ball peen hammer, dead blow hammer, claw hammer, tack hammer, drywall hammer, welding hammer, rock hammer, brick hammer, electrician hammer, and more!.
  • LOW-PROFILE PROFESSIONAL LOOK | Holds snug to your belt and doesn't get grimy like nylon or leather hammer loops..
  • ASSEMBLED IN IDAHO, USA | Durable holster Kydex frame, 100% polycarbonate belt clip, steel loop, and rivets..
Check Stock

Slide With the Glide

  • Sufficient quantity and proper size: you will get 30 tack-in drawer glides, the thickness of the hard plastic cushion part is 11/16 x 1/2 x 3/32 inch, the quantity is sufficient to meet your daily use and replacement.
  • Practical drawer glide: the drawer tack glide can be applied to repairing dressers that are difficult to slide or have a broken glide.
  • It can reduce the friction when the wooden drawer slides, reduce the wear of the drawer, and make your drawer slide smoothly and evenly.
  • Simple installation: the plastic tack-in drawer tack glide is not difficult to install.
  • The nails are very pointed and strong, and can be easily nailed into the wood block.
  • You can use a small board and a small head hammer to install it, which make it easier to you installation.
  • Durable to use: the tack-in drawer glide for repairing dressers is effortless to use and allows you to repair the dilapidated drawers at home by yourself, saving time and energy.
  • Reminder: the drawer glides are small in size, please keep them away from children and avoid swallowing.
  • Be careful when installing to avoid being injured by pointed nail heads.
Check Stock

ComfortStyle Premium Upholstery Tacks, Nailhead Decorative Trim for Furniture, 5/8\ Diameter, 100 Nails (Pewter Nickel)

  • ...il while maintaining a vintage look. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These rustic nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

ComfortStyle Premium Upholstery Tacks, Nailhead Decorative Trim for Furniture, 7/16-inch Diameter (100, Black Pearl)

  • ...il while maintaining a vintage look. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your cork board at home.
Check Stock

ComfortStyle Premium Upholstery Tacks, 1-inch Diameter Nailhead Pins, Large Decorative Trim for Furniture (50, Pewter Nickel)

  • PREMIUM GRADE - These nailheads measure 1" in diameter with a 3/4" shank. They are the same nailheads we have been selling to the commercial furniture industry for years and now they are available to you.
  • BEAUTIFUL FINISH - These decorative nails are sure to add beauty to any piece of furniture that needs updating or could simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

ComfortStyle Premium Upholstery Tacks, 3/4-inch Diameter Nailhead Pins, Large Decorative Trim for Furniture (80, Pewter Nickel)

  • PREMIUM GRADE - These nailheads measure 3/4" in diameter with a 3/4" shank. They are the same nailheads we have been selling to the commercial furniture industry for years and now they are available to you.
  • BEAUTIFUL FINISH - These decorative nails are sure to add beauty to any piece of furniture that needs updating or could simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

uxcell 10 Oz Welding Chipping Hammer Steel Tack Hammer Electrician s Hammer with Wooden Handle for Removing Repairing

  • Durable Tack Hammer - 10 oz drop-forged steel head welding hammer with high hardness, the hammer head is polished will not easy to rust, long lasting.
  • Ergonomic Handle - Good wood handle with good manual paint process very smooth and slippery hand feel. It is more ergonomic and labor-saving when used. Your wonderful wood handle hammer.
  • Good Connect - With glue at the joint between metal and handle, it's safe and will not drop.
  • Convenient - This hammer is portable and easy to carry, so you could take it for outdoor.
  • Wide Use - Suitable for indoor and outdoor use, such as home, repairing shop, etc.
Check Stock

Camie Fast TACK Upholstery Adhesive, 12 oz. can, 1 Count (313)

  • Camie 313 Fast Tack Upholstery Adhesive is especially formulated to bond foam to foam, as well as foam-to-fabric, wood, particle board, cardboard, metal and fiberglass.
  • Has a web spray pattern that is clear, offers low soak-in and instant tack.
  • Develops flexible bonds that are either temporary or permanent.
Check Stock

decotacks® Silver Upholstery Nailhead Trim, Silver Upholstery Nails/Tack in Short (4in Long) Strips 7/16in (11mm) Head Diameter, Covers 6 Meters (6,6 Yards) [Nickel/Silver Finish] DX0511NI-S6M

  • Head Size : 7/16in (11mm) *** Shank Length : 5/8in (17mm) *** Equal to 500 Nail Heads.
  • THIS ITEM REQUIRES TOOLS TO INSTALL (NEEDLE NOSE PLIERS & TACK HAMMER), Without these tools nails may get bent.. Even professionals are using this tools to install upholstery nails...
  • Made by Steel with high grade double layer Nickel Electroplating... Due to they are plating in same pools, the single nail and strips color is very similar.. They don't have color matching problems like long strips...
  • Package have min. 60 pcs of Strips (4in Long) with minimum 132 single nail heads which can easly cover 6,5 yards or can say equal to 500 Nail heads..Every 3 nail heads there is one loose nails.. so you just need to apply 132 nails instead of 500 to do its job....
Check Stock

Headliner/Fabric Adhesive, 18.1-oz.

  • This spray adhesive is a high strength, high temperature resistant formulation that holds most woods, particle board, metal, laminate and many plastics. It is ideal for use on trim work, door panels, decorative laminates, upholstery work, and many more demanding applications..
  • DIRECTIONS FOR USE: Shake well before using. Hold can 6-8" from surface to be bonded and apply an even coating..
  • FOR PERMANENT BONDS: Spray both surfaces and allow to dry to a tack..
  • TACK RANGE: 1-sided application: 30 minutes. 2-sided application: 2 hours.
  • TO CLEAN TIP: Invert can and spray until only gas comes out..
Check Stock

Tack-In Drawer Glides Drawer Tack Glide for Repairing Dressers, Making All the Drawers Slide Smoothly and Evenly (30 Pieces)

  • Sufficient quantity and proper size: you will get 30 tack-in drawer glides, the thickness of the hard plastic cushion part is 11/16 x 1/2 x 3/32 inch, the quantity is sufficient to meet your daily use and replacement.
  • Practical drawer glide: the drawer tack glide can be applied to repairing dressers that are difficult to slide or have a broken glide.
  • It can reduce the friction when the wooden drawer slides, reduce the wear of the drawer, and make your drawer slide smoothly and evenly.
  • Simple installation: the plastic tack-in drawer tack glide is not difficult to install.
  • The nails are very pointed and strong, and can be easily nailed into the wood block.
  • You can use a small board and a small head hammer to install it, which make it easier to you installation.
  • Durable to use: the tack-in drawer glide for repairing dressers is effortless to use and allows you to repair the dilapidated drawers at home by yourself, saving time and energy.
  • Reminder: the drawer glides are small in size, please keep them away from children and avoid swallowing.
  • Be careful when installing to avoid being injured by pointed nail heads.
Check Stock