Top Upper Cylinder Lubricant

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • ... ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whetstone into the cylinder, and then run the drill bit at a low speed of 300-700 RPM. Move the bone left and right every second, and never push the stone more than 3/4 inch away from the cylinder. The engine hone time should not exceed 3 minutes, after honing, wipe the inside of the drum with a paper towel..
Check Stock

Run-Rite G.D.I Preventative Maintenance Kit - Fuel System Cleaner for Gasoline Direct Injection Engine, Valves, Induction Components & Fuel Injector Cleaner Kit - Clean Carbon & Fuel Deposits - 2 Kits

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Universal Cylinder Liner Puller Assembly - Heavy Duty Diesel Engine Cylinder Liner Puller Used for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” bore, Alternative to PT-6400-C M50010-B 3376015

  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570..
  • 【Direct Replacement】Our universal cylinder liner puller direct replacement for OEM #PT-6400-C, M50010-B and 3376015..
  • 【Function】This universal liner puller works on wet liners of from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148. Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block..
  • 【Important】Threads must be lubricated with J23444-A or equivalent high pressure lubricant for heavy duty truck applications. (Package Includes 1 x Grease AND 1 x Cylinder Liner Puller Tools Kit PT-6400-C.).
  • 【Superior Material】Crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
Check Stock

Head Stud Replacement Kit for 7.3L 1993-2002 Ford Power Stroke Diesel CP879

  • ...drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts..
  • KIT INCLUDES - 36x Heads Studs, 36x Nuts, 36x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings..
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards..
Check Stock

Permatex 81343 Anti-Seize Lubricant, 1 oz. Tube , White

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Prevents galling, corrosion and seizing and to assure easier disassembly.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock

ARP 247-4202 Stud Kit

  • Lubricate the both sides of the washers with ARP ultra-Torque Fastener Assembly Lubricant then place them over the studs onto the cylinder head spot faces..
Check Stock

Alcohol Top Lube, Grape Scent

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Prevents galling, corrosion and seizing and to assure easier disassembly.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock

Loctite 504469 Silver-Grade Anti-Seize Stick, 20-Gram

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Prevents galling, corrosion and seizing and to assure easier disassembly.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Kotobukiya Zoids RHI-3 Command Wolf Repackage Version Plastic Model Kit Multicolor

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock

Permatex 80071 Anti-Seize Lubricant with Brush Top Bottle, 4 oz.

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Prevents galling, corrosion and seizing and to assure easier disassembly.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock