Top Usb To Serial Converter Chip

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector

  • All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode.
  • 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack.
  • Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units.
  • Integrated low power 32-bit CPU could be used as application processor.
  • The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable..
Check Stock

StarTech.com 1 Port USB to Serial RS232 Adapter - Prolific PL-2303 - USB to DB9 Serial Adapter Cable - RS232 Serial Converter (ICUSB232V2)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter converts a USB port into an RS232 DB9 serial port to connect to, monitor, and control a serial device.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this USB to RS232 converter works with your Windows, Mac or Linux system.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this USB to DB9 serial adapter, supporting a Baud Rate up to 921.6Kbps.
  • PORTABLE DESIGN: Powered by a USB port, this USB to RS232 serial adapter cable features a lightweight design that conveniently fits into your carrying case, making it ideal for professionals on the go.
  • Install in almost any laptop or desktop computer through broad operating system compatibility, including Windows 8.
  • Communicate efficiently with connected devices with high-speed 921Kbps support.
  • Portable and lightweight, the USB-Powered design requires no additional power adapter.
  • USB to Straight-Through RS232 DB9 Serial Adapter.
  • Compatible with Windows 8, Mac OS X and Linux.
  • USB-powered - no external power adapter required.
Check Stock

TECHTOO 4 Port Professional FTDI CHIP USB to Serial RS232 DB9 Adapter Converter Serial Cable 9-Pin Male to Male with Thumbscrews

  • HOW IT WORKS: TECHTOO USB to Quad Port RS232 DB9 Serial Adapter is Designed for Connecting to Serial Devices Such As DB9 Equipped Serial Modems, ISDN Terminal Adapters, Digital Cameras, Label Writers, Palm PCs, Barcode Scanners, PDAs etc Through USB port with 1Mbps Data Transfer Rate.
  • CONNECTORS: With Standard USB Type A Male to Standard 9-pin DB9 RS-232 Serial MALE Connector with Hexnuts.
  • CONDUCTOR & SHIELDING: Tinned Copper Conductor and Triple Shielding Ensure the Best Data Transfer Rate. Powered by USB Port, No External Power Adapter Required. Simple Installation, Plug & Play after One Time Driver Installation ( Product come with a Driver CD ).
  • CHIPSET & SUPPORTED OS: FTDI FTDI232RL Chipset for Widest Possible Stablity and Compatibility with Windows (10/8.1/8/7XP), Mac, Linux, etc. Support Almost All Serial COM Port.
  • 12 Month WARRANTY: USB 2.0 to Serial (9-Pin) DB-9 RS-232 Converter Cable is Backed with 12 Month Warranty and Customer Service Support.
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

DTECH 6 Feet USB to RS232 DB9 Female Serial Adapter Cable Windows 11 10 8 7 Mac Linux Serial to USB 2.0 (PL2303 Chip)

  • RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
  • DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
  • 6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
  • USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
  • Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).
Check Stock

UGREEN USB to RS232 Adapter Serial Cable DB9 Male 9 Pin with PL2303 Chipset RS-232 Converter Cable for Windows 10 8.1 8 7 XP Vista, Mac OS, Linux, 6FT

  • How it works: This USB to rs232 adapter connects to serial devices via a USB port, such as serial digital cameras equipped with DB9, label writers, handheld computers, barcode scanners, PDAs, etc. This USB to serial adapter is widely used in shopping malls, offices, etc..
  • Multi-system compatibility: This usb to serial adapter is compatible with Win 7 8 10 Win XP Vista Mac OS Linux system. It would automatically update the driver for Win8 and above. For windows 7, Mac OS, please install the CD driver in the package. Note: Linux only supports the use of kernel version 2.6-5.2..
  • Multi-device compatibility: This USB to rs232 adapter is suitable for computers (computers or laptops) to connect various RS232 serial devices, such as cash registers, LED and LCD text displays, digital cameras, POS, Bar code scanners, door control system, printers, CNC controllers, scanners, etc..
  • Double shielding layer: This rs232 to usb has a thick tinned copper core, aluminum foil, metal braided mesh shielding layer, multi-layer shielding to isolate interference, which can make it smooth and not stuck when used. In addition, its baud rate supports 20bps to 256kbps, and serial communication data can be transmitted quickly..
  • Powerful chip: This rs232 to usb is equipped with PL2303....
Check Stock

Adafruit Feather 32u4 Bluefruit LE [ADA2829]

  • ATmega32u4 clocked at 8 MHz and at 3.3V logic - same chip setup as the Flora.
  • USB native support, built in USB bootloader and serial port debugging - no need for an FTDI-like chip.
  • It can also act like a mouse, keyboard, USB MIDI device, etc..
  • Hardware Serial, hardware I2C, hardware SPI support.
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

StarTech.com 4 Port USB to Serial RS232 Adapter - Wall Mount - Din Rail - COM Port Retention - FTDI USB to DB9 RS232 Hub (ICUSB2324I)

  • INDUSTRIAL STRENGTH: Built to withstand harsh environments, this 4 port USB to serial RS232 adapter has a rugged all-metal enclosure for added durability in industrial settings.
  • COM RETENTION CAPABILITIES: For added convenience, this FTDI USB to DB9 RS232 hub features COM retention so COM port assignments are maintained during reboots.
  • PLUG AND PLAY INSTALLATION: This DB9 serial converter is powered by an available USB port / cable so no external power adapter is required.
  • INSTALLATION OPTIONS: This USB serial adapter has integrated wall mount brackets and included DIN Rail clips for versatile mounting options.
Check Stock