Top Usb3 0 To Sata Adapter

GeeekPi for Raspberry Pi 4,X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connection Support Key-B 2280 SSD Only

  • X862 V2.0 is powered via USB 3.0 connector. Using shorter copper spacer to connect Raspberry Pi 4 and X862 V2.0, which reduces the height of the entire product..
  • It Provides SATA SSD expansion board with M.2/NGFF SSD Key-B 2280 length interface..
  • Supports M.2 NGFF 2280 Key-B 2280 lengths ONLY.
  • Package Inlcudes:1x X862 V2.0 M.2 NGFF SATA SSD Shield,1x USB3.1 adapter (USB connector),4x Screw M2.5 *6mm,4x Copper Pillar M/F M2.5 *7+6mm,4x Copper Pillar F/F M2.5 *9.5mm,1x Screw driver ,1x Screw M2 *4mm (for fixing SSD),4x Heatsinks,1x Transparent bottom plate.
Check Stock

M.2 to USB Adapter RIITOP NVMe to USB 3.1 Reader Card Compatible with Both NVMe PCI-e M Key SSD & B+M Key SATA Based NGFF SSD

  • M.2 to USB Adapter, RIITOP M2 SSD to USB 3.1 Card Reader Compatible with Both NVMe (PCI-e Channel) & B+M Key (SATA Channel) SSD，allows adding NVMe....
  • Chipset and Speed - RIITOP NVMe to USB Adapter Adopts Realtek 9210B Master chip, USB3.1 GEN2 transmission. It will be reduced to USB 3.0 Speed if....
  • Compatible with M.2 SSDs ( Both NVMe and B+M key SATA): 80x22mm, 60x22mm and 42x22mm. Compatible with M.2 SSDs (NVMe and B+M Key SATA): 80x22mm,....
  • Note: This M.2 NVMe SSD to USB Adapter adopts M key Socket, but can support both M.2 PCI-e Based M Key Nvme SSD, and SATA based B+M key or B Key SSD.
  • Package including: 1x M2 to USB Adapter, 1x silicone pad, 1x screwdriver.
Check Stock

Desktop Computer M-ATX Motherboard, DDR3 LGA1155 CPU for Intel B75 Mainboard, RTL8111H Gigabit Network Card, M.2 NVME+NGFF Dual-Mode, SATA3.0/USB3.0/6-Channel Audio Chip

  • 【M-ATX Motherboard】- B75 M.2 motherboard supports M.2 high speed hard disk interface, round keyboard (PS/2 port). Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission..
  • 【Graphics Card】- High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience.
  • 【Expansion Slot】- Supported: 1 x PCI-EX16 graphics slot, 1 x PCI-EX1 slot, 1 x M.2 interface with NVME/SATA mode conversion jumper, 2 x USB2.0 pin, 1 x USB3.0 pin, 3 x SATA2.0 interface, 1xSATA3.0 interface..
  • 【Feature】- Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate. Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice. M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
  • 【Satisfaction Service】- If you have any problems while using this product, please feel free to contact us immediately by email, we will serve you as soon as possible. For any questions related to product quality, we will exchange or refund for you in full, thank you for choosing us, thank you..
Check Stock

WEme USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with Offline Clone/Duplicator Function for 2.5 & 3.5 Inch HDD SSD SATA (SATA I/II/III) Support 2X 8TB & UASP, Tool-Free

  • Usb 3. 0 external, SATA-III internal, especially made for 2. 5 inch and 3. 5 inch SATA HDD/SSD, USB 3. 0 SuperSpeed & supports UASP, even faster data transfer.
  • Integrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference and disturbance, safer data transfer and access.
  • Support offline Clone, no drivers needed, easy installation.
  • cloning can only be done from a drive to B drive, make sure the memory capacity of B drive is larger than a drive.
  • Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is.
  • entering sleep mode without operation in 30 minutes.
  • Package includes: 1 x USB3. 0 to SATA Dual bay docking station.
Check Stock

ZTC Sky Board mSATA to USB 3.0 SSD Enclosure Adapter Case. Support UASP SuperSpeed 6Gb/s 520MB/S Model ZTC-EN002

  • ZTC Sky Board External USB3.0 mSATA SSD Enclosure.
  • Suitable for any 50mm mSATA Solid State Disks (SATA II or SATA III).
  • With support for UASP (USB Attached SCSI Protocol).
  • Easy assembly - cover clicks into place without the need for screws.
Check Stock

ZTC Sky Board mSATA to USB 3.0 SSD Enclosure Adapter Case. High Speed 6Gb/s Support UASP. Silver Model ZTC-EN00-S

  • ZTC Sky Board External USB3.0 mSATA SSD Enclosure - Silver Edition.
  • Suitable for any 50mm mSATA Solid State Disks (SATA II or SATA III).
  • With support for UASP (USB Attached SCSI Protocol).
  • Easy assembly - cover clicks into place without the need for screws.
Check Stock

ALIKSO mSATA Mini PCIe SSD to USB3.0 External SSD Adapter with CASE Enclosure No Need USB Cable

  • mSATA SSD Drives TO USB3.0 Adapter with Enclosure.
  • No Support SATA MINI PCIe and PATA MINI PCIe SSD.
  • Case Material:Aluminium Alloy,Size -115mm*29mm*9mm.
Check Stock

BEYIMEI PCI-E to USB 3.0 2-Port Expansion Card, with 15-pin SATA Power Connector and 19-pin USB3.0 Interface, Suitable for Desktop Windows XP/Vista / 7/8/10 / Linux/Ubuntu（2X Type a）

  • SuperSpeed ​​USB 3.0 supports transfer rates of up to 5 Gbit / s and is backwards compatible with USB2.0 / USB1.1 / USB1.0 (the actual transfer speed is limited by the settings of the connected device)..
  • Provides two external USB3.0 ports for direct connection to USB3.0 U hard drives, mobile hard drives and other devices. An internal USB3.0 20PIN connector for connection to the front panel of the housing..
  • Compatible with Windows XP / 2003 / Vista / Win7 / Win8 / Win10.
  • The USB3.0 interface provides 5V 2A super power supply as well as sufficient and stable power supply to ensure stable operation of the device. Integrated SATA extended power interface, support for hot swap..
  • It corresponds to the PCI Express specification 2.0, the USB3.0 SuperSpeed ​​specification 1.0 and takes over the third generation NEC master D720201. Supports small computer cases..
Check Stock

ANYOYO M.2 to USB Adapter USB 3.1 Gen 2 Bridge Chip 10 Gbps Converter Reader for M.2 NVME&SATA SSD Based M Key and B+M Key Support 2230 2242 2260 2280 22110 Size SSD

  • [High Performance] - M.2 NVMe / SATA to USB adapter based on 10Gbps USB3.1 Gen 2 bridge chip（RTL9210B）, can retrieve and backup data in high....
  • [M.2 NVMe/SATA SSD] - Support for M.2 NVMe/SATA SSD Based on M & B+M KEY.NOT support SATA based B Key SSD. Applicable to sizes 2230 2242 2260 2280....
  • [Hot Swap] - The M.2 to USB adapter without enclosure cover, can help fast heat dissipation with a thermal pad..
  • [Plug and play] - Plug and play, can realize full potential of high performance..
  • [Please Note] - PLS CHECK TO MAKE SURE YOUR DRIVE IS M.2 SSD. DO NOT support any B Key or B+M Key SSD based sata data transfer protocol or non-M.2....
Check Stock

Dell Optiplex 9020 MT Mini Tower 4 Memory Slots DDR3 SDRAM LGA 1150 Socket Intel Q87 Express 6 USB Ports MotherBoard PC5F7

  • DDR3 memory: Fully compatible with DDR3 desktop memory 1066/1333/1600/1866..
  • USB3.0 high-speed interface: front and rear dual-position, dual USB3.0 interface, high transmission rate..
  • SATA3.0 high-speed hard disk interface: Max 600Mb/s transport speed, support SSD solid state drive high-speed transmission. Starting your computer quickly..
  • Nuclear HDMI HD graphics: HD high-performance graphics card, support VGA + HDMI dual output. (Need CPU Support).
  • Package includes 1 × Motherboard,1 × SATA cable,1 × Baffle..
Check Stock

fosa PC Front Panel Internal Card Reader, Media Multi-Function Dashboard USB 3.0 Port Support M2 SD MS XD CF TF Card for Computer, Fits any 5.25\ Computer Case Front Bay

  • The front panel media dashboard is made of durable ABS material and etched on surface. It is stable with high speed and safety. It is anti-rust and hard to be scrapped.
  • 2 USB3.0 HUB (HOST), transfer speed up to 5.0Gbps, downward compatible with USB2.0 and USB1.1 built-in PCI-E interface (no need to purchase the USB3.0 PCI-E card) , as long as your motherboard has PCI-E interface will be able to your computer in one step to upgrade to USB 3.0.
  • Front interface: e-SATA port, the transfer speed up to 3.0Gbps, Front port: power 12V/5V output (SATA 15PIN Power Interface) standard round 4PIN turn to 15PIN power cable directly to the SATA hard drive power supply.
  • audio ports, front speakers, and microphone to solve the inconvenience of your chassis behind the plug.
  • More than 1 card reader, support SD / MMC / CF / MD, the MS / XD, TF / M2 series storage memory card.
Check Stock

ORICO 4 Bay External Hard Drive Enclosure USB 3.0 to SATA 3.5 inch Support 64TB 4 x 16TB Aluminum Alloy HDD Enclosure with Fan/150W Disk Data Storage No RAID -9548U3

  • 【4 Bay HDD Enclosure with 64TB Large Capacity】: 4 Bay Hard Drive Storage Enclosure, Compatible 3.5 inch SATA hard drive HDD, Supports up to 4 x 16TB hard drive, Total capacity up to 64TB. (Not support RAID, Not NAS function).
  • 【Super Speed USB3.0 Transfer Speed up to 5Gbps】: This 4 bay hard drive enclosure supports all 3.5" SATA (I / II / III) hard disks, USB3.0 to SATA3.0 dual high-speed transmission,speed up to 5Gb/s, backward compatible with USB 2.0 / 1.1, Activity LED indicator disk access status.
  • 【 Dual-Core Chip & 150W Internal Power Supply】: Built-in SATA3.0 Dual-Core chip, and Upgrade the 150W power supply to support larger capacity hard drives, provide sufficient power to ensure the Data storage and Transferring's Safety and Stability, Independent safety lock for each drive, Protect your hard drive with care.
  • 【Unibody Aluminum-Alloy Body & Double Heat Dissipation】: The 4 Bay Raid Enclosure Features an Unibody Aluminum-Alloy Shell and Fan, good in heat dissipation, up to 4mm thickness which is firm and reliable, The Forced Convection Process helps speed up the air circulation and heat ventilation to effectively cool the drive and whole system for stable operation and an extended lifespan.
Check Stock