Top Used 30ton 35ton Cranes

Amrad TES5 Easy-Start 5 Hard Start Kit for Heat Pump - 1-5 ton

  • Can be used in place of the "4" most commonly used Hard-Start kits.
  • Microfarad Coverage: Up to 1 ton - 108 to 130 mfds , 1 to 2 tons - 189 to 227 mfds , 2.5 to 3 tons - 233 to 280 mfds or 3.5 to 5 tons - 270 to 324 mfd.
  • High microfarad capacitor and potential relay are enclosed within a sealed aluminum housing protecting it from harsh environments.
  • Does NOT require a vent hole and will NEVER dry out.
  • For use with A/C , Heat Pump , HVAC and Refrigeration Compressors.
  • AmRad TES5 Replaces & Supersedes the following aftermarket Hard Start Kits: TES4 , TES-4 , TES-5 12400 12600 5-2-1 Products , Rectorseal KS1 , Rectorseal TO5 , SPP5 , SPP6 , WSX5 , WSX6 , TradePro TO-5 , TradePro KS-1 , TurboStart , Turbo-Start , Turbo Start and many others.
Check Stock

Goplus 2 Ton Folding Engine Hoist Cherry Picker Shop Crane Hoist Lift, Heavy Duty Steel with 6 Iron Caster Wheels (Red)

  • ...he operation flexible and smooth, but also providing maximum maneuverability. It is a good choice for transporting engines..
  • 【Adjustable Positions & Folding Design】There are 4 adjustable positions for your different work demands: 0.5Ton,1Ton,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. Folding design makes the stand easy to transport and store as a space saver..
  • 【Practical Engine Stand】This hydraulic engine hoist can be the perfect choice for daily vertical lifting & support in automotive and repair shops. It can be widely used in transporting, repairing, maintenance and assembly heavy parts such as axles, transmissions and transfer cases around the shop..
  • 【Powder Coated Finish】This engine hoist is evenly painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With its smooth finish, it is also very easy to clean and maintain with damp cloth..
Check Stock

TOHO HSH-616 Lever Block/Ratchet Puller Hoist (3 Ton, 5ft. Chain)

  • Comformity - ANSI B30.16, AS1418.2, EN13157 Warranty - Three Years.
  • Test - Each piece pass proof load test at 150% of rated load..
  • Available in 3/4 Ton, 1.5 Ton and 3 Ton Capacity with 5ft, 10ft. and 20ft lift chain length.
  • Safety - All the hoist has a 4:1 safety factor PLI available.
  • Products liability insurance available for all the hoist.
Check Stock

Goplus 2 Ton Folding Engine Hoist Cherry Picker Shop Crane Hoist Lift, Heavy Duty Steel with 6 Iron Caster Wheels (Black)

  • ...ding maximum maneuverability. It is a good choice for transporting engines..
  • 【Adjustable Positions & Folding Design】There are 4 adjustable positions for your different work demands: 0.5Ton,1Ton,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. Folding design makes the stand easy to transport and store as a space saver..
  • 【Practical Engine Stand】This hydraulic engine hoist can be the perfect choice for daily vertical lifting & support in automotive and repair shops. It can be widely used in transporting, repairing, maintenance and assembly heavy parts such as axles, transmissions and transfer cases around the shop..
  • 【Powder Coated Finish】This engine hoist is evenly painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With its smooth finish, it is also very easy to clean and maintain with damp cloth..
Check Stock

HPDMC 5 Ton (10,000 lb) Capacity Dual Position Hydraulic Forklift Service/Floor Jack

  • Sturdy Construction: The hydraulic machine toe jack lift is made of heavy-duty steel material, and the high-quality steel is heat-treated for durability. Thicken base, large oil filler hole, portable handle, and wearable spindle provide you an excellent toe jack..
  • Various Application Area: Toe jack is widely used in the installation and maintenance of mechanical equipment, bridge construction, railway track, and other aspects, the loading and unloading of large goods in transportation, the repair of automobiles and tractors, etc..
Check Stock

OTC 6290A Front Hub Puller

  • necessary for wheel bearing or brake rotor service.
  • Provides the mechanical advantage and straight pull not possible with a slide hammer.
  • Services 1988-2013 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon.
  • Services 1994-2013 Dodge 3/4-ton and 1-ton RAM trucks.
  • Services 1998-2013 Ford 3/4-ton and 1-ton trucks and Excursion.
Check Stock

BEETRO Electric Car Jack 5 Ton 12V Car Jack Hydraulic Kit with Inflator Pump, Electric Jack for Car Sedan MPV Tire Changing, Lifting Range 6-17.7''

  • ...nected to cigarette lighter power outlet or car battery, and has a long 11.5 feet power cord so you can place it by the front or rear tire . Also,It comes with build-in flashlight, and drop-proof tool box,don‘t worry about working at night or missing accessories. The red triangle on the surface of tool box can be used as a warning road sign when repairing on the highway..
  • SAFETY GUARANTEE : When electric car lift jack reaches the height limitation, will automatically stop working.The self-locking structure of jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload..
  • ATTENTION : Never use over 5 ton. Use the jack on flat and firm ground. Start your car engine before operation, to supply sufficient electricity. When the pressure rod cant be lowered, pull out the safety valve cap, use the small hexagonal wrench to loose, until the pressure rod fall to the prior position, then tightening it..
Check Stock

Pro-LifT G-4630JSCB 3 Ton Heavy Duty Floor Jack/Jack Stands and Creeper Combo - Great for Service Garage Home Uses - Black

  • Pro Lift G-4630JSCB Mechanics Set features 3 Garage Essentials in one convenient package. It comes with 3 Ton Garage Jack, 3 Ton Jack Stand, and 300 lbs detachable Creeper..
  • The Garage Jack with the the 3 Ton Capacity features the steel frame construction for the added strength and durability. With the 3″ roller casters, they ensure the portability and stability..
  • The Garage Jack is designed to lift, but not support one end of a vehilce. It must be used in conjunction with the pair of 3 Ton jack stands provided..
  • The jack stands has the 3 Ton capacity. Install the ratchet bar into the frame. The ratchet portion of bar must be aligned with the ratchet pawl..
  • The creeper has the 40″ in length with the capacity of 300 lbs. With 6 casters, it provides users with the easy maneuverability..
Check Stock

Welding Symbols Quick Card

  • ...is. Valuable information for: RN, Medical Assistant, Student, CNA, LPN, LVN, EMT, Tech, or Other Medical Worker!.
  • EASY TO READ MEDICAL REFERENCE - This 30 card badge set uses all the available space with readable print to provide you with the info you need when you need it. No useless cards and tons of value! Can be used as flashcards for student nurses!.
Check Stock

Cadence Fishing CR5 Spinning Rods | 30 Ton Carbon | Fuji Reel Seat | Stainless Steel Guides with SiC Inserts | CR5-701S-MF

  • What You Get From Cadence: Cadence fishing poles offer high-performance premium features at an unbeatable value. Fishing with quality, dependable gear....
  • Ultra-High Quality 30-TON Carbon Fiber Blank: All CR5 1-piece and 2-piece fishing rods are constructed with 30-ton carbon matrix graphite blank offers....
  • Premium Materials: Cadence CR5 spinning rods are made from materials that bring strength and sensitivity without weight. Made of 30 ton carbon, SiC....
  • Super Smooth Power: Stainless steel guides with SiC inserts makes it more smooth and durable, avoids line sticking into the guides, minimizes friction....
  • Travel Friendly: Unique 2 piece design makes it easily and affordable to fit in car, trunk, boat hatch than traditional one piece,but using feel like....
Check Stock

Cadence Fishing CR5 Spinning Rods | 30 Ton Carbon | Fuji Reel Seat | Stainless Steel Guides with SiC Inserts | CR5-662S-MF

  • What You Get From Cadence: Cadence fishing poles offer high-performance premium features at an unbeatable value. Fishing with quality, dependable gear....
  • Ultra-High Quality 30-TON Carbon Fiber Blank: All CR5 1-piece and 2-piece fishing rods are constructed with 30-ton carbon matrix graphite blank offers....
  • Premium Materials: Cadence CR5 spinning rods are made from materials that bring strength and sensitivity without weight. Made of 30 ton carbon, SiC....
  • Super Smooth Power: Stainless steel guides with SiC inserts makes it more smooth and durable, avoids line sticking into the guides, minimizes friction....
  • Travel Friendly: Unique 2 piece design makes it easily and affordable to fit in car, trunk, boat hatch than traditional one piece,but using feel like....
Check Stock

New Industrial Wire Rope 1/2\ Single-Leg Eye & Eye Wire Rope Sling | Standard Eyes Each End… (1/2\ x 4')

  • 2.5 Ton Vertical | 1.90 Ton Choker | 4.4 Ton Basket 60 Degrees.
  • Wire rope sling for lifting loads in industrial environments.
  • Eye-and-eye endings for vertical, choker, and basket lifting configurations.
  • Mechanical (also called Flemish) spice is stronger than a hand splice.
  • Meets ASME specification B30.9 and OSHA specification 1910.184.
Check Stock