Top Used Range Rover

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Engine: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN, OEM Equivalent 303-1437.
  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley t....
Check Stock

Set of 2 Front Hood Lift Support Struts Gas Spring Shock for Land Rover Range Rover 2003-2012

  • YHTAUTO Affordable and Prime Lift Support Shock Struts, Directly Fit.
  • Fits Land Rover Range Rover 2003-2012 L322 Series (Not fit for Range Rover Sport/Range Rover Evoque models).
  • Reference Number: 32029656, BKK760010, 6358, E11675701CP.
Check Stock

X AUTOHAUX Car Center Console Cup Holder LR021330 for Land Rover LR2 LR3 LR4 Range Rover Sport

  • Fitment: for Land Rover LR3 2005-2009, for Land Rover Range Rover Sport 2006-2013, for Land Rover LR2 2009-2015, for Land Rover LR4 2010-2015, for Land Rover Range Rover 2010-2012.
  • OE Number: LR021330 Please check the OE number to see if our product fits your vehicle..
  • Quality Materials: This front center console holder is made of quality and tough materials which are durable and intends for long service life..
  • Features: Features a round compact cell to hold the cup and makes your vehicle clean and tidy..
  • Placement on Vehicle: The cup holder can be installed in the center console to keep your cup steady in the car..
Check Stock

GENUINE LAND ROVER FRONT TURN SIDE SIGNAL LIGHT LH+RH SET EURO STYLE WITHOUT SIDE MARKERS COMPATIBLE WITH LAND ROVER RANGE ROVER L322 2003-2005 PART: XBD000043 & XBD000053

  • GENUINE LAND ROVER FRONT TURN SIDE SIGNAL LIGHT LH+RH SET EURO STYLE WITHOUT SIDE MARKERS COMPATIBLE WITH LAND ROVER RANGE ROVER L322 2003-2005 PART: XBD000043 & XBD000053.
  • This listing is for Genuine Brand New set of 2 LH / Left Hand and RH / Right Hand side clear front turn side signal light WITHOUT SIDE MARKERS for Range Rover L322 vehicles..
  • Part No: XBD000043 & XBD000053 EURO STYLE SPEC. Brand: LAND ROVER.
  • Description: Comes as complete assembly including bulbs and bulb holders. Recommended Quantity: 1 Dimensions: 0.08 m x 0.21 m x 0.075 m.
  • Fits: Range Rover Full Size 2003 - 2005 Only RH / Passenger Side & LH / Driver Side.
Check Stock

TRW Pro TRH1098 Disc Brake Pad Set For Land Rover LR3 2005-2009, Front, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Land Rover LR3: 2005 - 2009, Land Rover Range Rover: 2006 - 2009, Land Rover Range Rover Sport: 2006 - 2009.
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

Oil Pump Gear Repair Kit OPK003 for Land Rover Discovery, Range Rover P38, Range Rover Classic, and Defender

  • FIT - This kit fits yourLand Rover Discovery 1 (1996-1999), Discovery 2 (1999-2004), Range Rover P38 (1995-2002), Defender 90 (1997), and Range Rover Classic (1995)..
  • QUALITY - A high-quality aftermarket replacement oil pump gear kit for your Rover..
Check Stock

GENUINE OEM FRONT TURN SIDE SIGNAL LIGHT SET RH & LH COMPATIBLE WITH LAND ROVER RANGE ROVER L322 2003-2005 Part # XBD000023 & XBD000033

  • COMPATIBLE WITH LAND ROVER RANGE ROVER L322 FULL SIZE 2003-2005 ONLY FRONT TURN SIGNAL LIGHTS SET OF RH / PASSENGER SIDE & LH / DRIVER SIDE.
  • NEW GENUINE LAND ROVER PART# XBD000023 & XBD000033.
  • Part No: XBD000023 & XBD000033 Brand: LAND ROVER.
  • Description: Comes as complete assembly including bulbs and bulb holders. Recommended Quantity: 1 Dimensions: 0.08 m x 0.21 m x 0.075 m Weight: 0.171 kilo.
  • Fits: Range Rover Full Size | '03 - '05 Only RH / Passenger Side & LH / Driver Side.
Check Stock

Land Rover Range Rover Classic 1987-1995 / Discovery 1 1994-1999 Wheel NUT with Washer Set of 5 Part: RRD500560 / ANR2763MMM

  • LAND ROVER RANGE ROVER CLASSIC 1987-1995 / DISCOVERY 1 1994-1999 WHEEL NUT WITH WASHER SET OF 5.
  • NEW OE UK BRAND PART # RRD500560 / ANR2763MMM.
  • Alloy wheel nut set of 5 with part number RRD500560 fits all alloy wheels on the Land Rover Discovery 1 Conical blind wheel nut - thread 16 x 1,50 - length wheel nut (mm): 52 - length thread (mm): 48 - to fit alloy wheel only - style: chrome - 27 mm socket - Ø shank: 29mm.
  • Land Rover # RRD500560 - Wheel Nut With Washer.
  • Fits: Discovery I | '94 - '99 Range Rover Classic | '87 - '95 Defender 90 | '94 - '97 Defender 110 | '93.
Check Stock

Brembo P44023 Disc Brake Pad Set

  • Land Rover Range Rover 2020-2010, Range Rover Sport 2020-2010.
  • Premium stainless-steel hardware & lubricant included in most applications.
  • Minimize braking distances & provide safe braking experience in all road conditions.
  • OE-equivalent formulations specifically engineered to enhance braking power.
Check Stock

National 475322N Style Oil Seal

  • Fits: Discovery I & II Range Classic Range Rover 95 – 02 P38 Range Rover 03 – 05 Defender.
Check Stock

BRITPART Wheel NUT with Washer Set of 20 Compatible with Land Rover Range Rover Classic 1987-1995 / Discovery 1 1994-1999 Part # RRD500560 / ANR2763MMM

  • COMPATIBLE WITH LAND ROVER RANGE ROVER CLASSIC 1987-1995 / DISCOVERY 1 1994-1999.
  • Fits: Discovery I | '94 - '99 Range Rover Classic | '87 - '95 Defender 90 | '94 - '97 Defender 110 | '93.
Check Stock