Top Used Textile Spinning Machinery

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

  • Made of 45# steel with high wear-resistance,strong and durable..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

Szliyands 220V 20mA Energy Saving LED Indicator Light Mounting Hole Size 22mm (7/8 Inch) Red Green Yellow 6 Pcs

  • Rated voltage: AC / DC 220V, Model: AD16-22D / S, Indicator color: Red, Yellow, Green..
  • 6Pcs environmental protection lamp: long life and reliable LED indicator, energy saving, low maintenance cost..
  • Easy to install: The screw clamp is easy to connect and has strong electrical conductivity. You only need to drill a 22mm (7/8 inch) hole and then use screws to fix it..
  • Practical and Convenient: These panel-mounted indicators ensure you a visual status indication of any index signal, expected signal, emergency signal, and other index signals..
  • Widely used: It can be used in power equipment, textile machinery, printers, ships and mining machinery..
Check Stock

BEMONOC 2Pcs/Pack HTD 5M Rubber Timing Belts Closed-Loop 400mm Length 80 Teeth 15mm Width Industrial Timing Belt

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

  • ... spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
  • A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric furnace heating, stage lighting control, photocopiers, medical equipment, petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities and other automation control areas.and so on. etc..
Check Stock

BEMONOC Pack of 2pcs HTD 3M Round Rubber Timing Belts Closed-Loop 201mm Length 67 Teeth 15mm Width Industrial Drive Belts

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

1/2\ x 4-1/2\ Aluminum Oxide 80 Grit Spiral Band A&H Abrasives 1 Each 878596

  • Mainly used for all kinds of woodworking, furniture, hardware and non-metal grinding and polishing..
  • Polyester backing for durability and long life..
  • Made of high quality alumina material, anti-static, durable and practical..
  • Widely used in metallurgy, machinery, shipbuilding, light industry, leather, wood, building materials, textile printing and dyeing industries..
  • Suitable for grinding and polishing of plywood, particle board, decorative board and bamboo and rattan products..
Check Stock

PGN - UCFL206-20 Pillow Block Flange Mounted Bearing 1-1/4\ Inch Bore (2 PCS)

  • ✅Package Content:4Pcs KFL08 Pillow Block Bearing Flanges..
  • ✅Dimension:Bore Size:8mm/0.31''.Mounting Hole Diameter: 5mm/0.2".Mounting Hole Distance: 37mm/1.46''.Bearing Inner Dia.: 8mm/0.31''.Total Size:48mmx25mmx12mm/1.88"x0.98"x 0.47"(L*W*H)..
  • ✅Made of high-quality zinc alloy with high strength, which is durable. The high-strength rolling body with better load carrying capacity is more abrasion-resistant. Polished by high precision CNC machine tool. It produces low noise and high speed. It is not easy to get hot so the use period is long..
  • ✅The bearing has a wide inner ring with two set screws for attaching to the shaft. Self-aligning. You can adjust or replace the bearing easily.The vertical surface of the bearing can be adjusted and changed. If you find that the product is not perpendicular to the installation plane, please adjust it manually..
  • ✅Widely used in various of machinery, power, mining, metallurgy, textile, agriculture and other industries, especially in food machine. The pillow block can also be used into conveyring systems, film processing machinery, spin machine and printing machine..
Check Stock

HDE Professional Digital Infrared Photo Tachometer RPM Motor Speed Gauge Tach

  • Hand hold design, simply and convenient to operate..
  • Widely used for force measurement in electronics, electrical appliances, hardware, auto parts, chemical industry, pen making, light industry, textile, machinery and other industries..
  • The dynamometer can be mounted on various workbenches, or work with clamping tools..
  • The push pull dynamometer has a dial gauge with analog signal and a 10N capacity..
Check Stock

4 Set Fits for 25mm Axles Trailer Wheel Hub Bearings Kit 32205 Bearings Rotary Quiet High Speed and Durable for Tapered Roller Bearings.

  • Product Size. The bearing rotates quietly and at high speed, and the high-quality chrome steel bearing is durable. Product material: steel.
  • number of rolling element columns: single column.
  • Easy to Use. The outer ring and inner parts (inner ring, roller and cage parts) of the ball bearing can be separated for easy assembly and disassembly..
  • Multiple Usage. Ball bearings are used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machinery, doors and windows, roller skates, toys, etc..
  • Made by Experts. The manufacture of professional bearings for tapered roller rotators began in 1945, which is worthy of your discovery and trust..
  • Customer Service. 1 year/50,000 miles free replacement or refund without reason, don’t worry about buying..
Check Stock