Top Utility Trailer Door Latch Kit

New Plastic Latch Set Kit for Solar Group Standard Mailbox Repair Latch Kit (1, Red)

  • Brand New Mailbox Plastic Latch Set Kit for Standard Mailbox.
  • A snug tight fit, keeps your mailbox door up and secure ~ No more doors falling open ~ Easy Installation, no tools required ~ No Mounting Hardware Needed.
  • Please verify measurements provided to ensure fitment before ordering - Measures Approximately: Top Latch: Length: 3-1/8" ~ Width: 7/8" ~ Posts (Center to Center):7/8" apart / Door Latch: Length: 2" ~ Width: 7/8" ~ Posts (Center to Center):7/8" apart / Latch Clips: Length:1-7/16" ~ Width: 3/4" ~ Holes (Center to Center): 7/8" apart.
  • Color: Red ~ Quantity: 1 kit ~ Each Kit Includes: 1 - Finger Handle / 1 - Latch / 2 - Mounting Brackets ~ Will not work with a metal latch.
  • Fits most metal mailboxes (Must have 2 holes for door latch and top latch) ~ The latch posts on door and top measure approximately 7/8" apart on center to center ~ Please see Measurements provided for fitment of your mailbox..
Check Stock

Brand New Latch Replacement Set Kit for Mailbox Repair - Top Latch, Door Latch, 2 Latch Clips for Solar Group Standard Mailboxes - Easy to Install No Additional Mounting Hardware Needed

  • LATCH SET KIT FOR MAILBOX REPAIR - Tired of your mailbox door always falling open? Or are you searching for a non-rusting and waterproof mailbox latch? Our latch set kit is what you are looking for. Made from polypropylene (PP), a type of plastic commonly used in the manufacture of living hinges and other non-load-bearing applications. PP plastics are highly durable and can bend repeatedly without breaking. It is also chemical resistant, high toughness, fatigue resistance, and more..
  • TOP LATCH, DOOR LATCH, AND 2 LATCH CLIPS - This simple latch mechanism is composed of 4 components. The top latch and door latch come with interchangeable latch clips. Each latch has posts that fit in mounting holes that measure 7/8 inches from center to center. If your mailbox has mounting holes that are farther apart, the latches may not clip on or even fit properly..
  • COMPATIBLE WITH SOLAR GROUP STANDARD MAILBOXES - This latch kit will provide a snug fit, tightly securing your Solar Group standard mailbox or any standard-sized metal mailboxes. It is suitable for use with existing latch holes (2 holes for the door latch and 2 holes for the top latch) on standard-sized metal mailboxes. Please note that you need to use the entire kit since the plastic latches won’t work w....
Check Stock

Heavy Duty Toggle Latch Clamp 4Pcs 660lbs Capacity Adjustable Toggle Clamp Black Smoker Door Latch Metal Pull Latch for Machinery Automobiles Luggage Lock Clamping Processing or Assembling

  • 【BLACK TOGGLE CLAMP】Made of galvanized iron material with black finish, sturdy and durable for long-time using, stronger than most 4002 latch in....
  • 【551lbs HOLDING CAPACITY】4002 Style Toggle Latch Clamp, metal latch handle and lever fastener, ideal small pull gate latch for smoker, trailer,....
  • 【Easy to Install】 Just fix the pull latch on the gate or case with screws.
  • Even if you install it little bit away or close, you could always....
  • 【WIDE APPLICATIONS】The hasp latch perfectly fit for work holding, connecting movable parts, tensioning two sectional, cabinet, smoker, jigs, door,....
Check Stock

New Plastic Latch Set Kit for Solar Group Standard Mailbox Repair Latch Kit (1, White)

  • Brand New Mailbox Plastic Latch Set Kit for Standard Mailbox.
  • Quantity: 1 kit ~ Select your quantity ~ Each Kit Includes: 1 – Finger Handle / 1 – Latch / 2 – Mounting Brackets ~ Will not work with a metal latch.
  • Color: White ~ Easy Installation, no tools required ~ No Mounting Hardware Needed.
  • A snug tight fit, keeps your mailbox door up and secure ~ No more doors falling open.
  • Fits most metal mailboxes ( Must have 2 holes for door latch and top latch) ~ The latch posts on door and top measure approximately 7/8″ apart on center to center..
Check Stock

Brand New Mailbox Plastic Latch Set Repair Kit for Solar Group Mail Box Standard Metal Mailbox Repair (1)

  • Brand New Mailbox Plastic Latch Set Kit for Standard Mailbox - 1 Kit.
  • Each Kit Includes: 1 - Finger Handle / 1 - Latch / 2 - Mounting Brackets ~ Will not work with a metal latch.
  • Easy Installation, no tools required ~ No Mounting Hardware Needed.
  • A snug tight fit, keeps your mailbox door up and secure ~ No more doors falling open.
  • Fits most metal mailboxes ( Must have 2 holes for door latch and top latch) ~ The latch posts on door and top measure approximately 7/8" apart on center to center..
Check Stock

ELITEWILL 4 Sets Trailer Wood Sides Brackets Latch Rack Stake Body Gates Corner - with Screws

  • 8 Pcs – 4 sets Stake Rack Connector with screw, enough for utility trailer 4 corners..
  • Trailer Wood Panel Side Latch Rack is for tailgates and bulkheads to connect panels at right angles..
  • Heavy duty steel, zinc plated for rust and weather resistance..
  • Screws included! 4″ long x 2-1/2″ high – 3 screw holes (5/16″ diameter).
  • Every trailer bracket has 3 mounting holes, improved version for better connectivity..
Check Stock

MJC & Company - 12" Round Sliding Barn Door Handle Pull Kit with Flush Mount Plate & Cabin Hook Lock - Heavy-Duty Modern Matte Black Hardware Set - Strong Industrial Pull & Privacy Latch

  • 12" LONG ROUND BARN DOOR PULL HANDLE: Our barn door handle provides a smooth & easy pull. Kit includes: (1) 4" hook latch, (1) finger pull, (1) long pull handle, (2) screws, (2) pads, (1) Allen wrench, EBOOK instructions & LIFETIME WARRANTY by MJC & Company.
  • MADE OUT OF HEAVY-DUTY STEEL: Forged from carbon steel, the components included in this barn door hardware pull kit are extra strong, highly dependable & tough enough to last & last. Perfect for commercial or residential use..
  • MODERN MATTE BLACK POWDER COATING: Our barn door handle with back plate & locking latch have been professionally upgraded with a matte black powder coating for added durability. The black finish coordinates with all types of decor!.
  • INCLUDED SLIDING BARN DOOR LATCH: Each kit includes a flush mount barn door hook latch. Some DIY decorators forget to install a barn door latch, leaving them with no locking options..
  • PAIR WITH ANY BARN DOOR KIT AND FLOOR GUIDE: MJC & Company barn door latches & handles have been designed to complement your existing barn door hardware ....
Check Stock

RV Keyless Entry Door Lock | V3.0 RV Lock Keyless Entry | All Metal Keyless RV Door Lock | Keyless RV Locks w/ 2 Fobs & More | Now Fully Sealed Electricals! | Will Only Fit 2.75\ x 3.75\ Lock Hole

  • ✔️ WILL IT FIT MY APPLICATION? Our ALL METAL V3.0 RV Door Lock fits RVs and trailers with an opening of 3.75" tall x 2.75" wide x 1.5" thick. UNLIKE ANY OTHER RV LOCK IN THE MARKET. CHECK DIMENSIONS and latch style with your trailer or RV before purchasing! NOW 100% METAL & FULLY SEALED ELECTRICALS. UNLIKE ANYONE ELSE IN THE MARKET!.
  • ✔️ WHILE OTHER RV KEYLESS DOOR LOCKS ARE flimsy and made of plastic, our NEW ALL-METAL V3.0 RV lock is NOW LIGHTER & STRONGER than before! The new WATERPROOFING TECHNOLOGY allows our locks to handle extreme rain & humidity. The back-lit keypad allows easy entry at night or in the dark. Allow us to secure your valuables and HELP YOU TRAVEL WORRY FREE WITH LOVED ONES..
  • ✔️ EACH KIT ARRIVES READY TO INSTALL AND INCLUDES 1x RV Door Lock, 2x v3.0 Key-fobs, 4x AA Batteries, 4x V3.0 Mechanical Keys, 1x Sealing Gasket, 1x Screwdriver, 1x Extra Keypad Overlay, Mounting Hardware & Owner's Manual/Install Guide. INSTALL IT WITHIN 10-MINUTES! All 100% backed by our 24/7 Online Support. MAKE SURE OUR LOCK DIMENSIONS FIT YOUR APPLICATION..
  • ✔️ OUR V3.0 DOOR LOCKS ARE DESIGNED with DURABILITY in mind. Now w/ the ability to SILENCE BEEPING, simply Press & hold "1". Will fit Campers with an opening of 3.75" x 2.75" x 1.5". WE I....
Check Stock

Harley-Davidson FLH/FLT Touring Series 2010-2013 (Clymer Manuals)

  • Chrome Push Button Fuel Door/Panel Latch Kit fits for Harley-Davidson motorcycle models 1992-2019 Electra Glides, Road Glides (excludes 2012-2013 and 2019 FLTRXSE), Street Glides (excludes 2011-2012 and 2015-2019 FLHXSE), Tour Glides and 2009-2019 Tri Glides (excludes 2015-2019 FLRT).
  • Eliminates fumbling with your keys in the dark while trying to get your gas door open.
  • Functions as a direct replacement for the stock key-lock fuel door latch.
  • Simply press down on button to pop open your fuel door latch allowing easy access to the gas cap.
  • Package included : 1 x Push Button Latch With Hardware Kit.
Check Stock

HZSOOCH 5 Inch Spring Latch Pin Stainless Steel Barrel Bolt Spring Loaded Locking Latch for Trailer Gate, Barn Door, Garage, Shed 4-Pack (Screws Included)

  • SAFE & CONVENIENT -- Spring bolt latch for locking, closing and fixing the door, you can open and close the latch easily, and can remain closed when required. Providing you with additional security..
  • STURDY MATERIAL -- Spring pin latch lock is made of 304 stainless steel, durable and corrosion-resistant, not easy to rust, can maintain good performance even in bad weather..
  • MULTIPURPOSE -- Thick sturdy solid high quality stainless steel, used for chests, shed door, gate, van, container, cabinets, trailer, truck, barn, closet, garage, garden shed,basement door, double-door shed..
  • EASY TO INSTALL AND OPERATION -- Just need a drill for the screws and to drill a hole for the bolt to be secure. And door is securely shut and opens easily by rotating the latch pin..
  • WARRANTY -- 90days warranty. If you have any question after getting the items, please feel free to contact us via email, we’ll offer you satisfied solution..
Check Stock

3/8 Clevis Slip Hook 4 Pack Forged G70 Steel Clevis Hook with Safety Latch for Deck Hauler Receiver Hitches Trailer Wiring Chain Hooks Solid Clevis Grab Hooks for Trailer 18,000lbs Capacity

  • 【3/8INCH GRADE 70 CLEVIS HOOKS 】Forged steel construction and precision heat treatment which rated for heavy-duty loads up to 18,000 lbs gross trailer weight..
  • 【QUICK RELEASE】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed..
  • 【HEAVY-DUTY CLEVIS SLIP HOOKS WITH LATH】Ideal for industrial and commercial towing clevis hooks are made of forged G70 high-carbon steel with rust-resistant chromate finish..
  • 【SPRING-LOADED SAFETY LATCH HOOK】 The latch ensures a safe chain connection that the rope, chain, and accessories will not separate from the hook when the load is slack.
  • The clevis hooks with a latch are quipped with a keeper pin, safety latch to easily attach the safety chains from the trailer to the towing vehicle..
  • 【APPLICATION】Our 3/8 inch Clevis Hooks are so heavy-duty, make them easy to use on utility trailers,truck, flatbed trailers, etc.It meets requirements for transport, high-test, and alloy chain..
Check Stock

US Cargo Control Enclosed Utility Trailer Shelving Kit, Convenient E Track Kit, Includes E Track Rails and Wood End Sockets, Easily Secure Cargo in Your Utility Trailer

  • CONVENIENT TRAILER E TRACK KIT - E Track Kits make it easy to get started with E-Track or to pick up coordinated essentials. This kit includes components well-suited for creating cost effective shoring beams in your enclosed utility trailer..
  • STRONG AND DURABLE - Our E Track Rails are made of durable galvanized 12-gauge steel. You can create an inexpensive and strong shoring beam using an ordinary piece of 2 x 4 lumber along with the included wood end sockets. Lumber Not Included..
  • EASY TO USE - The included wood end sockets easily snap in and out of the E Track Rails allowing you to customize and re-adjust your setup as needed..
  • E TRACK KIT INCLUDES - (4) 5' Horizontal E-Track Rails, (8) Wood End Sockets for E-Track. NOTE: Hardware (screws/bolts) to fasten the E Track are not included. NOTE: Hardware (screws/bolts) to fasten the E Track is not included..
  • SPECS - Enclosed Utility Trailer Shelving Kit | E Track Rails Made of 12-gauge Galvanized Steel | Wood End Socket Product Weight: 0.9-pounds each | Quantity: 1 Trailer E Track Kit.
Check Stock