Top V band Hose Clamp

STEELSOFT Stainless Steel Band Clamp System Kit, DIY, Large Hose Clamp Worm Clamps Duct Clamp 2.5''-115'' Diameter, 30 FT Strap + 8 Fasteners, Air Ducting, Metal Strapping, Exhaust Wrap Clamps

  • Super Easy To Use: Please read the installation manual in the 2nd image! Only a snip or plier + a screwdriver needed. If there's no a snip, please use a plier to bend the strap up and down repeatedly, it will be cut easily also!.
  • Make Your Own Clamp: Nothing like the freedom to determine your own band clamp sizes and still have enough material left for other future projects. Please read our installation manual in the 2nd image, very easy to trim strap, insert fasteners and get a custom hose clamp!.
  • Cost Effective: DIY hose clamps will make it much more cost effective and flexible than ordering a variety of expensive hose clamps..
  • 304 Stainless Steel: 1/2'' x 30 feet band + 8 PCS adjustable fasteners are well made of 304 stainless steel, rust protection, weather resistant. They will not be rusty with age, last forever!.
  • Large Hose Clamp: Sometimes it is hard to look for a large stainless steel band clamp in your local stores. Now 30 feet band strap is available to create a clamp in flexible diameter options 12 inch 14 inch 16 inch 18 inch 20 inch 22 inch 24 inch 26 inch 28 inch 30 inch 40 inch ... and 115 inch max..
  • Separated fasteners can be purchased in this link if you have extra strap left..
Check Stock

TEHAUX 40 Pcs Adjustable Hose Clamp Water Oil Tube Hose Clamps for Flexible Hose Pipe

  • for industrial or home use, help to lessen pressure and protect the hose..
  • Made of iron, plated surface, improve the ability of corrosion resistance and anti resistance..
  • hose extrusion with the hose clamp. Iron wire band is more stronger for long time fastening use..
  • Wire hose clamp, easy to use, release or tighten the screw to adjust the band diameter range..
  • Release or tighten the screw to adjust the band diameter range..
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

DNA Motoring WG-TS-40MM-T11-BK External Turbo Manifold Wastegate Black

  • Application: V band clamp work very well in operating conditions involving stress, vibration and extreme temperature fluctuations,such as exhaust....
  • DESIGN:Each assembly consists of two Mild Steel Flat flanges and one 304 Stainless Steel V-band clamp,providing a perfect overlap seam for welding.The....
  • ADVANTAGE: One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • ADVISE: You can use a drop of anti-seize on the clamp’s retaining nut. This helps extend the life of the clamp and protects the ability of the....
  • The 2.5" v band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping experience....
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

Adjustable House Clamp 304 Stainless Steel, 14.7 FT Duct Metal Strapping with Holes + 10 Stronger Fasteners, Large Worm Gear Hose Clamps Band Clamps for Pipe Plumbing Mechanical Applications

  • [Any size hose clamps Assortment Kit] Do you sometimes need an odd-sized hose clamp, especially one that would be bigger than you would normally use? If so, this is the hose clamps assortment kit for you, with this kit you custom-cut your own clamps when and as you need them. No more ill-assorted collections of mostly wrong-size clamps that are usually too big or too small for your needs with no bulky, wasted material..
  • [Package Include] The hose clamp kit includes 0.5’’ X 14.76 FT stainless steel strapping bands, and 10 pcs fasteners in total. They can be adjustable for most clamp and securing situations. Moreover, very strong good quality 304 stainless steel will not rusty for a long time..
  • [How to Use] Before using, prepare plier for cut the hose clamps, and a small flat bladed screwdriver. Then, test feed the direction of the band before crimping the screw end on by feeding in, screwing, making sure it is not locking up after few turns. The band will work smoothly and is tightened by a screw with threads of the screw engaging the slots in the band, if put together proper way. Once you get screw clamp part mounted on the band, just measure how long you need i....
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

EVIL ENERGY 3.0 Inch Stainless Steel Exhaust V Band Clamp Quick Release Mild Steel Flat Flange

  • Application: V band clamp work very well in operating conditions involving stress, vibration and extreme temperature fluctuations,such as exhaust....
  • DESIGN:Each assembly consists of two mild steel flat flanges and one 304 stainless steel v-band clamp,providing a perfect overlap seam for welding.The....
  • ADVANTAGE:One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • ADVISE : You can use a drop of anti-seize on the clamp’s retaining nut. This helps extend the life of the clamp and protects the ability of the....
  • The 3.0" V band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping experience....
Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

  • [ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
  • [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
  • [ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
  • [Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..
Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

  • DIY Hose Clamp: Nothing like the freedom to determine your own screw clamp sizes and still have enough material left, come in handy for other future projects. Trim the strap in suitable length, insert the fasteners and get small or large hose clamp options from 2.5'' to 37''max diameter..
  • Super Easy To Use: In our 2nd image, you can read the diagram manual! Only a snip/plier and a screwdriver needed. If you have no a snip on hand, please use a plier to bend the strap up and down repeatedly, it will be cut easily! Make an adjustable hose clamp as you want!.
  • Cost Effective: Our hose clamp kit makes it much more cost effective and flexible than ordering a variety of pre-made worm clamps. You can make band hose clamps in odd sizes such as 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch and so on. Round and polygonal shapes are all available..
  • Smooth Worm Gear Clamp: Our fastener steel is thicker than competitions, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!.
  • All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 2....
Check Stock

304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping

  • DIY Hose Clamps: Our hose clamp assortment is an awesome kit for you to determine your own size of worm clamps. Anytime to get odd sizes 2.5'' or extra large 45'' which are rare to find in the local stores..
  • Super Easy To Use: In our second image or package, you could please read the instructions. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
  • Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
  • Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
  • No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm driv....
Check Stock

3 Inch V Band Clamp CNC Stainless Steel Flanges 3in SS Vband V-Band Flange Kit

  • 1️⃣ 3 Inch V Band Clamp with CNC Stainless Steel Flanges，Complete V-band kit, offer effective fastening solutions, remove intercooler systems....
  • 2️⃣This kit is specifically designed for 3" exhaust pipes.Good stainless, thick enough to not warp without a million tacks. Male/ female means no....
  • 3️⃣ One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • 4️⃣This complete 3inch Vband kit includes 1x 3" V-Band clamp (3.25" outer diameter) which is designed to accommodate the 2x stainless steel 3"....
  • 5️⃣The 3.0" v band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping....
Check Stock