Top Vacuum Extruding Machinery

Pure Silicone Tubing,2mm ID x 4mm OD,16.4 Feet,Flexible Silicone Rubber Hose Pipe Tube Aquarium Air Pump Transfer

  • 【Color & Material】Color: Translucent.
  • 【Working Temperature】From -40°F to +400°F..
  • 【Features】Ozone and UV resistance,flexible,softness,harmless and so on..
  • 【Application】Industrial equipment,coffee machine,aquarium fish tank hose,liquid barbed,automotive vacuum,machinery vacuum water air hose,coffee tube ,water pump hose,solder sucker,etc..
Check Stock

Toolly 3 Gallon Vacuum Chamber and 3 CFM Pump Kit for Degassing Silicone Epoxy

  • 【Preventing Oil Returning Design】The passage for gas entering is specially designed,which can prevent the oil flowing back and so prevent the pumped container and tubes from being polluted..
  • 【Overall Design】The electric machinery and the pump are wholly designed and direct drive. Low noise and vibration. The tank is separated, and there are separating devices at the exhaust port. lt can avoid oil spraying and reduse pollution..
  • 【Easy Monitoing】Our vacuum pump is equipped with an oil viewing window to monitor oil levels easily and avoid oil deficiency. And the acrylic lid is convenient for you to observe the internal state..
  • 【Great Starting Moment Design】The design is easy for starting and high in efficiency, which can keep it running normally even in lower tewperature environment and lower volt. Forced feed lubrication system(dualstage vacuum pump)..
  • 【Wide Application】Alloy aluminium casing is used in this electrical mavhinery, it has high heat scattering efficiency. 3 Gallon Vacuum Chamber kit used to degass urethane, silicones, epoxies, extracting essential oils from organic materials, etc..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

5CFM 1/3HP Deep Vacuum Pump HVAC Refrigeration Single Stage R134 R410a AC Air Refrigerant 110V 60Hz Wine Degassing or Epoxy Manifold Gauge Milk and Medical Processing

  • ❄KEY PARAMETER: Flow Rate: 5 CFM, 75 micron Ultimate Vacuum:5 Pa,1/3HP AC Air Tool Rotary Vane ,Inlet Port: 1/4"&3/8" Flare, Voltage /Frequency:....
  • ❄WIDELY USED: vacuum pump is widely used for both commercial and household applications，such as refrigeration maintenance, printing machinery,....
  • ❄GUARANTEED QUALITY：The all-copper movement is better than aluminum wire and has a longer service life. Also has a Faster running speed and stable....
  • ❄LARGE OIL WINDOW DESIGN: Large oil window, the minimum and maximum oil levels can be seen at a glance, to prevent oil shortage, and at the same....
  • ❄STABLE OPERATION:Strong copper motor makes the vacuum pump operate stably, when the machine is vacuumed, it can ensure the stable operation of the....
Check Stock

Glass Suction Cup 8 inch 2 Pack Vacuum Suction Cups to Lift Large Glass with 1 Carry Box Heavy Duty Tile Suction Cup Tool Industrial Suction Cup Lifter for Replace Windshield,Tile,Granite, Glass Door

  • The quality of ingenuity: Heavy duty vacuum sution cups can hold up to 220lbs. suitable for all kinds of smoth surface. Strong suction, work efficiency is double, save time and effort. it solves the problem of installation and transportation of high altitude and special objects, and can cooperate with machinery, no longer carry heavy objects with bare hands..
  • 8 inch vacuum suction cup: The high quality vacuum suction cup with a diameter of 8 inches can be quickly and powerful adsorbed on smooth, flat and non-porous surfaces. Ruber pad is flecxible and thick, strong suction , high durability, fast adsorption, simple operation, easy to use, The rubber sucker has high durability, not easy to wear. Strong adsorption capacity,lasting no air leakage..
  • Widely used: suitable for tile, stone, metal, furniture, carry large tiles, glass, cabinet, car windshield, sunroom construction, engine valves, household appliances..
  • Red Warning Line Pressure Indication: (1) press the handle to extract air (2) slowly press the safety red line into the suction pump. 3) please pay attention to red line at all time, when the red cue line appears, vac....
Check Stock

2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

20 Pieces 5 Inch Cars Microfiber Wax Foam Applicator Pads,Microfiber Round Sponge Detailing Cleaning Pads Car Wax Applicator Pads Polish Microfiber Foam Sponge for Cars,Yellow Green Blue Dark Blue

  • Soft and durable material: the round sponge cleaning pads are made of microfiber and sponge, which has good softness, absorbency, longevity, and strong decontamination, washable and reusable, can last for a long time use.
  • Features: after the sponge absorbs water, the sponge holes can absorb dust and particles by extruding, and will not directly scratch the body surface, safe for hard surface, plastic, rubber, leather, vinyl, paint, transparent coating and more.
  • Size information: each microfiber round sponge measures approx. 13 cm/ 5 inches in diameter and 2 cm/ 0.8 inch in thickness, proper and compact size for your use, lightweight and convenient for you to carry or store.
  • Wide application: the microfiber sponge wax applicator can be applied to waxes, polishes, sealants, creams, dressings, conditioners and glazes, etc., multi-purpose sponge is not only suitable for cleaning, waxing, dusting and polishing vehicles, interior cleaning, leather seat cleaning, can also be applied as household cleaning tool.
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • ...any of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision..
  • Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD a....
Check Stock

ZKGRAND CNC Dust Shoe,80mm 3.15in ,White

  • This product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly eliminate sawdust and dirt, so as to keep the worktable clean and tidy..
  • Spindle diameter: 80mm / 3.15 inch, vacuum port: 97mm / 3.82 inch,Please confirm the diameter of your router before choosing..
  • The assembly and installation of this product is very simple, and it is easier to replace the drill bit..
  • The brush is easy to disassembly and replace when worn..
Check Stock

CNC Engraving Machine Dust Shoe For 70mm Spindle

  • Spindle diameter: 70mm / 2.75inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router....
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

CNC Engraving Machine Dust Shoe For 85mm Spindle

  • Spindle diameter: 85mm / 3.35inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock