Top Valve Globe Fitting Pipe

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

Holley 26-501 Analog Vacuum Gauge

  • Determines the correct power valve to use.
  • Features a white face, black digits and pointer, and chrome bezel.
  • Diameter measures 2 with a 0.125 pipe thread brass fitting.
  • Mechanical sending unit helps check fuel pressure.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Check Stock

Minimprover 2 Pack Brass 1/2 Inch FIP x 3/8 Inch OD Compression Quarter Turn Straight Water Angle Stop Valve Shut Off

  • ★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead..
  • ★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting..
  • ★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F..
  • ★ Shut-off angle stop valve for faucets and toilets. Brass ball mechanism provides easy for operation..
  • ★ Package include: 2 PCS 1/2" FIP x 3/8" inch OD compression Valve. Comes with 1 year warranty..
Check Stock

12mm Check Valve, Plastic Inline Check Valve, One Way Non Return Check Valve for Water Fuel Gas Liquid Air

  • 【SAFE MATERIAL】: Medical grade material, safe and nontoxic, perfect for water pipe fitting..
  • 【ANTI-RUST】: Strong resistance to acid, alkali, salt corrosion ability, can be used for different types of liquid..
  • 【WORK UNDER 100 】: Non-return one-way air water gas check valve can work under 100 , can be used to deal with most kinds of liquid for its good formability..
  • 【STABLE】: High adsorption properties, thermal stability, chemical stability, has high mechanical strength, etc.
  • 【WATER CHECK VALVE SIZE】: Diameter:22mm, Total Length: 63MM..
Check Stock

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

LubriMatic 30-114 Continuous Flow Air Operated Grease Gun

  • Continuously pumps grease while trigger is depressed.
  • 2-way loading: 14 oz. cartridge or suction load.
  • Head cap port for adding air bleeder valve or bulk loader fitting.
  • Capable of 3-way loading: 14 ounce cartridge bulk or suction.
  • Recommended inlet pressure 90 PSI and dispenses 5 ounces per minute.
Check Stock

11025 1 1/2' Diesel Installation Kit, Compatible with Gravity Fueled Auxiliary Fuel Tank, Only for Diesel

  • 1. Valve Shut Off to Avoid Overflow of Gas from Fuel Tank.
  • 3. Kit includes accessories, hoses and clamps.
  • 4.Provides Consistent Gravity Feed of Fuel.
  • 5.Designed to Work with 3/8-Inch Female Pipe Thread Drain Fitting.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Aupoko R134A Self-Sealing Can Tap with R134A Tank Adapter, 1/2’’ Acme to 1/4’’ SAE Refrigerant Can Bottle Tap Opener with 1/4’’ SAE Female and 1/2’’ Acme Male Adapter

  • ☞ WIDE COMPATIBILITY ---- The R134A self-sealing can tap refrigerant dispenser with tank adapter, connects all R134A automotive air conditioning refrigerant cans. Refrigerant bottle opener with 1/2’’ ACME LH female/internal thread, the 1/4’’ SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4’’ SAE female x 1/2’’ ACME male tank adapter fitting for R134A manifold..
  • ☞ R134A SELF-SEALING CAN TAP VALVE ---- This r134a self sealing can tap designs with hand operated punch/valve control, it can only be used for self-sealing cans with 1/2’’ ACME thread (Can capacity usual greater than 6OZ or so-called big cans), either cannot be used on puncture style cans..
  • ☞ USEFUL TANK ADAPTER ---- The R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" ACME male flare, connects to R134A manifold..
  • ☞ PREMIUM QUALITY ---- This R134A refrigerant self-sealing can tap with adapter is made of heavy-duty brass alloy for durable using, with screw-on design and safety check valve, even working under extreme conditions, features with long-lasting seals to prevent leaking..
  • ☞ 1 YEAR WARRANTY ---- This self sealing r134a can tap with brass tank adapter comes complete with 12 months warrant....
Check Stock

Ultimate Washer UW16-PA75B8 High Pressure Chemical Injector, 8.0 GPM, 3500 PSI, Brass

  • Includes: Adjustable Injector Metering Valve, Tubing and Filter.
  • Brass Adaptor with Standard Garden Hose Fitting by 1/2-inch Male Pipe Thread.
  • Connects Between Garden Hose and High Pressure Pump.
Check Stock

Boxtech Fish Tank Water Change Aquarium Vacuum Siphon Water Changer Pump Sand Cleaner for Aquarium Water Filter

  • 3 IN 1 Boxtech Aquarium Cleaner: Water changer, washing sand, cleaning, it’s a multifunctional cleaning tool. Compatible with additional nozzle can....
  • Compact Structure: Compatible with 1pcs soft water pipe(72.4in) and 2pcs hard water pipes(11in*2). It is easy to install and operate. fitting....
  • Anti-Back Flow Valve Design - Widened anti-reverse pipe makes drainage more effective. Kindly Note: Please put the QV letter end downward against the....
  • Safe and Easy Use: Made of quality flexible PVC plastic which could ensure a long time use. It won't collapse to block the water flow, also, it is not....
  • Special Design: Extra long tubing & hard pipes allows you to reach any dirty spots immediately without getting your hands wet.
Check Stock