Top Valve Manifolds - BuyWiseBest.com

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.

Most advanced, high temp RTV silicone gasket available.
Three times more oil resistant than conventional silicones.
eight times more flexible than cut gaskets.
Sensor-safe, low odor, and non-corrosive with superior adhesion.
Temperature range -75F to 700F intermittent.
Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.

Most advanced, high temp RTV silicone gasket available.
Three times more oil resistant than conventional silicones.
eight times more flexible than cut gaskets.
Sensor-safe, low odor, and non-corrosive with superior adhesion.
Temperature range -75F to 700F intermittent.
Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.

RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area..
MULTI-USE. Valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housing as well as industrial furnaces, ovens, etc..
CONVENIENT CURING. Tack-free in 1 hour. Full-strength in 24 hours..
LOCTITE 596 RTV RED SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..

Performance street cam with excellent drivability. Great replacement for muscle car cams with auto trans. Stock exhaust manifolds and dual plane intake with mild 4 bbl carb. 4X4 and performance marine cam with dry exhaust..
219/227 Duration at .050". 112 Degree Lobe Separation Angle. 0.468"/0.489" Valve Lift.
Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
More Power Where It Matters - Lunati's Voodoo cams deliver more area under the curve than any other camshaft series..

SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.

Excellent response, good mid-range, noticeable idle..
218/224 Duration at .050". 110 Degree Lobe Separation Angle.
Excellent performance in street carbureted applications..
More vacuum allows an increase in duration for improved performance and assists power brakes..
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
Best performance with aftermarket intake manifolds, headers and lower gear ratios..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..

Ideal Applications Include Valve Covers, Intake Manifolds, Coolant Flanges, Oil Pans, Timing Covers, Heavy-Duty Truck and Fleet.
An additional application nozzle is included in every package for multiple use convenience..

Efficient: The testo 549 erases the need for analogue manifolds, offering data storage for up to 60 refrigerant profiles, precise measurements and automatic calculations.
Accurate: Thanks to the extremely sensitive sensors, the digital manifold determines high side and low side pressure as well as evaporation and saturation temperature.
Easy operation: Equipped with a large 2-line backlit display, 2-way valve block with three connections and a suspension hook, the HVAC/R instrument enables a convenient application.
Dependable: With its rugged design and sturdy, impact resistant housing, the pressure meter was particularly created for harsh environments and provides a lasting performance.
Versatile: In conjunction with an optional temperature probe, the digital gauge provides accurate real-time superheating and subcooling readings.

100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
ADVANTAGE - Basic Operating RPM Range: Idle-5500.
FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..

Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
Accurately controls the flow of fluid through individual radiant loops.
Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.