Top Valve Rocker
ARP 100-9913 Bolt Kit (Ultra Torque lube1.0 oz.)
- Protected valve train parts include: camshaft, lifters, valve springs, rocker arms, pushrods and distributor gear.
- Contain high viscosity extreme pressure additives not found in today's conventional oils and lubricants.
- Compatible with all petroleum, synthetic and blended engine oils.
Check StockEdelbrock 2172 Performer-Plus Camshaft and Lifter Kit
- Kit includes a camshaft, hydraulic lifters, assembly lube and full instructions.
- Intakevalvelift with factory rockerarmis 0.484 and exhaust valve lift is 0.510.
- Intakecamlift is 0.280 and exhaust valve lift is 0.295.
- Only stock ratio rocker arms should be used with the kit.
Check StockBH-Motor New Valve Gasket Set for 794152 Replaces # 690190 794114 796584 699168 692410
- BH-Motor New Valve Gasket Set Fit for 794152 Replaces # 690190 794114 796584 699168 692410.
- Replace for 692236 Exhaust Gasket ,690968 Valve Seal.
Check StockTFT Res-Q-Rench Folding Spanner Multi Tool - Res-Q-Rench
- Lightweight, injection-molded nylon Comfortable, ergonomic design.
- Spanner wrench for rocker lugs Carbide tip window punch.
- Seatbelt cutter Small oxygen cylinder valve wrench.
- Residential gas valve shut-off Small pry tool.
Check StockHearthSong Rock with It! Giant 6-Foot Inflatable Curved Rocker Seesaw with Handles for Kids Active Play, Holds up to 250 lbs.
- INFLATABLE KIDS SEESAW ROCKER: Kids will rock around the clock with HearthSong's Rock With It! Giant 6-Foot Inflatable Curved Rocker—a new way to enjoy indoor and outdoor active play! There's no wrong way to play—rock forwards and backwards sitting or lying down, or use this sturdy inflatable seesaw as a relaxing place to read a book or just hang out..
- SUPER-SIZED: This curved rocker is supersized (6'L x 3½'W x 2½'H) to hold one or two kids (or one child and a parent), up to 250 lbs..
- DURABLE MATERIALS: Constructed of durable, 0.45mm thick vinyl, this rocker will withstand plenty of active play! Vinyl repair patch kit included..
- SAFETY FEATURES: Six handles (three on each side) offer extra safety while riding..
- EASY TO INFLATE: Quickly and easily inflate and deflate with 2-stage valve (pump sold separately). In just a jiffy, you're ready to rock and roll!.
Check StockRocker Arm Assembly Set Rocker Arm Shaft Lifter Assembly Fit for DODGE CHARGER CHALLENGER Engine 3.5L 4.0L 892293AC 4892293AC 4892293
- 【Rocker Arm Assembly Set】The role of the valve rocker arm is to cooperate with the camshaft to open the door in time to complete the intake and....
- 【Suitable For】Rocker arm shaft lifter assembly for 3.5L/4.0L engine, fit for Dodge CHARGER/CHALLENGER, fit for CHRYSLER 300/CHRYSLER PACIFICA..
- 【Original Fit】 Replacing OEnumbers for reference: 4892293AC, 4892293, 4892293AA, 4892293AB. Original standard, direct replacement for the previous....
- 【Satisfying Service】 As a responsible seller ,we provide satisfying products and service.If you have any questions about anything,please feel free....
Check StockPowerbuilt Valve Spring Compressor Tool, Remove and Install Valve Springs and Retainers, Compressing, for 3/8 Inch and 7/17 Inch Studs - 940541
- Simple effective and powerful tool for compressing high performance valve springs.
- 12" long handle offers plenty of leverage for compressing springs.
- Stud mount for 3/8 and 7/16 inch rocker studs.
Check StockCOMP Cams 1418-16 Magnum Roller 1.6 Ratio Rocker Arm Set for '88+ Chevrolet SBC w/ 3/8\ Stud
- Ultimate street rocker designed for serious performance enthusiasts.
- Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift.
- Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift.
- 15 to 30 horsepower increase over stock rocker arms.
- Use in any applications with less than 350 lbs. open spring pressure.
Check StockCOMP Cams 1451-16 Magnum Roller 1.52 Ratio Rocker Arm Set for Pontiac 265-455 w/ 7/16\ Stud
- Ultimate street rocker designed for serious performance enthusiasts.
- Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift.
- Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift.
- 15 to 30 horsepower increase over stock rocker arms.
- Use in any applications with less than 350 lbs. open spring pressure.
Check StockLoctite 1330906-6PK Medium Strength Surface Insensitive Threadlocker 243, 36-milliliter Tube, (Pack of 6)
- An oil tolerant, removable, medium strength, blue threadlocker.
- Designed for the locking and sealing of threaded fasteners between 1/4" and 3/4".
- Not only works on active metals but also on passive substrates such as stainless steel and plated surfaces.
- Tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
- Typical applications include Rocker studs, rocker adjustment bolts, bolts on valve and cam covers, oil pans, disc brake calipers, intakes and alternators, and pulley assemblies.
Check StockATVWorks Compatible/Replacement for Kawasaki Mule KAF620 Valve Cover/Rocker Case 11022-2068 & 11022-2056 with 2 Gaskets Replaces 11061-2182
- Includes 2 gaskets for both Rocker Cases. Replaces OEM 11061-2182 &11060-2332.
- Our gaskets are the same material as OE but .02 mm thicker for better sealing. No more leaks!!.
- Includes Valve Cover / Rocker Case Replaces OEM 11022-2068 & 11022-2056.
- Fits Kawasaki 2500, 2510, 2520, 3000, 3010, 3020, 4000, 4010 Mules (1993-2016).
- This product will ship FAST & FREE using Postal mail Service ONLY. Please include your post office box number if you do not receive mail at your....
Check StockTOP NOTCH PARTS CYLINDER HEAD ASSEMBLY REPLACEMENT FOR YAMAHA TIMBERWOLF 250 YFB250 2X4 / 4X4 1992 1993 1994 1995 1996 1997 1998 1999 2000
- NEW! REPLACEMENT FOR YAMAHA TIMBERWOLF 250 YFB250 2X4 / 4X4 CYLINDER HEAD ASSY 1992-2000.
- THIS BRAND NEW AFTERMARKET KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
- PURCHASE INCLUDES: CYLINDER HEAD ASSEMBLY. ( HEAD INCLUDES: EXHAUST & INLET VALVES, VALVE SPRINGS, CAMSHAFT, ROCKER ARMS, VALVE RETAINERS ). CAMSHAFT COVER. VALVE COVERS. CAMSHAFT PLATE. HEAD VENT TUBE. O-RING KIT. NUT, BOLT & WASHER KIT. NGK SPARK PLUG..
- REPLACEMENT FOR OEM Part # 4BD-11101-03-00.
Check Stock