Top Variable Heat

1inch Glastar Grinder Bit

  • The car polisher features powerful, 12 amp, all ball-bearing construction for long life and performance for the most demanding applications.
  • Electronic module of the variable speed polisher maintains specified speed under load delivering better finish results.
  • Conveniently located variable speed dial of DEWALT polisher lets user set maximum speed from zero to 600/3500 rpm for different materials and....
  • Variable speed trigger allows user to control speed from 0 to dialed maximum setting.
  • Heat-treated, precision-cut steel gears for smooth operation.
Check Stock

24"x24"x 1/8" ABS Plastic Vacuum Forming Sheet Textured Front Smooth Back

  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min.
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉.
  • Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
  • Two concentrator nozzles direct a concentrated heat flow to the work surface.
  • Reflector nozzle disperses heat flow evenly around the whole work surface..
Check Stock

Dyna-Glo 20,000 BTU Natural Gas Blue Flame Vent Free Wall Heater, White

  • Natural Gas Ready (Fuel conversion not permitted).
  • Blue Flame Technology works by converting heat to warm the air the same way as a central heating system.
  • 10, 000-20, 000 BTU's/hr variable heat output for up to 700 sq. ft..
  • Variable control knob offers the most customizable heat settings LOW - 10, 000 BTU MED - 15, 000 BTU HI - 20, 000 BTU.
  • No electricity required allows for reliable back-up heating incase of an emergency situation.
  • This model (BF20NMDG) has manual control and not thermostatically controlled. For thermostat control model please refer model - BFSS20NGT-2N.
Check Stock

Wahl Clipper Deluxe Heated Therapy Handheld Rotary Massage Kit - 8 Unique Attachments for Back Massage, Neck Massage, Leg Massage, Hand Massage, and More – Model 4344

  • Buy Now – Enjoy the benefits our handheld Heat Therapy massager has to offer.
  • features variable intensity for light to intense massage, 8 attachment heads including an extra-large PTC heat attachment head, & a soft zippered storage case.
  • 8 Unique Attachment Heads – Featuring a wide variety of attachments for various styles of massage.
  • Triad, Heat, Round Ball, Pinpoint, Four Finger Flex, Facial, Power Disc, & Soft Applicator.
  • 9 Ft Braided Power Cable – Increased length and durability gives you greater flexibility during usage.
  • treat yourself to a post work out massage or after a stressful day at work.
  • Variable Intensity – Features a variable speed dial for gentle to intense massage.
  • reduces pain & fatigue from joints, sports injuries, arthritis, muscle knots, stress, & improves flexibility.
  • User Friendly – Sleek, long handle for all-over muscle comfort for the back, neck, shoulder, legs, hands, feet, full-body, cellulite, & more.
  • professional quality & therapeutic to release pressure points, promote circulation, reduce inflammation, muscle soreness, stiffness, chronic pain, & fibromyalgia.
Check Stock

TR Industrial-Grade 4-Piece Electric Demolition Jack Hammer, with 3 Bits - Point, Flat, Scoop Shovel Spade Bit

  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min.
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉.
  • Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
  • Two concentrator nozzles direct a concentrated heat flow to the work surface.
  • Reflector nozzle disperses heat flow evenly around the whole work surface..
Check Stock

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • ...rs that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 15” x 10” x 2.4”, Weight: 11.2 lbs..
Check Stock

DEWALT Variable Speed Polisher 7-Inch to 9-Inch DWP849

  • The car polisher features powerful, 12 amp, all ball bearing construction for long life.
  • Electronic control of the variable speed polisher maintains specified speed under load delivering desired finish results.
  • Conveniently located variable speed dial of DEWALT polisher lets user set maximum speed from zero to 600/3500 rpm for different materials and applications.
  • Variable speed trigger allows user to control speed from 0 to dialed maximum setting.
  • Heat-treated, precision-cut steel gears for smooth operation.
Check Stock

X-Chair X-HMT Heat & Massage Therapy Unit – Heat & Massage Unit Attaches to Any X-Chair on Amazon / 4 Massage Levels/Increase Blood Flow and Reduce Stress While Working

  • ...THERAPY: The latest innovation to ergonomic work seating by X-Chair is here. Whether you’re on the go in your car, sitting at your desk at work or home, or watching a movie, the X-HMT is there to provide heat and massage therapy and enhance your day..
  • ELEGANT AND EASY INSTALLATION: Place the X-HMT into the Dynamic Variable Lumbar (DVL) support with the button panel on the right side facing you. Place the back cover behind the back support bar with the X logo on the left. Align the left edge of the back cover with the left edge of the DVL and gently press it into place..
  • 4 MASSAGE MODES: The X-HMT has two levels of massage intensity - Gentle and Powerful. There are two different massage mode settings on the X-HMT - Constant and Variable. The Constant setting is a steady vibration pulse and the Variable setting is a rhythmic vibration..
  • HEAT SETTINGS: Relax your muscles with the fast-warming technology of the X-HMT. Press the Heat button once to turn it on for consistent heat. The LED light will glow red and automatically shut off after 15 minutes of use. If only using the Heat function your X-HMT will last for up to 7 cycles when fully charged or continuously when plugged in. 55 °C / 131 °F..
  • COMPATIBLE WITH ALL X-CHAIRS ON AMAZON: X-Basic DVL Task Ch....
Check Stock

Planet Audio BBD2500 Class D Car Amplifier – 2500 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply

  • Power: 2500 watts max X 1 @1-ohm, 1250 watts max X 1 @2-ohms, 625 watts max X 1 @4-Ohms.
  • Class D: power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 ohm stable: able to continuously power loads of 1 ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Variable subsonic filter: to prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Check Stock

Heat Gun for Crafts, Mini Dual Temp Hot Air Gun Tool for Epoxy Resin, Shrink Wrapping, Vinyl Wrap, Embossing, Electronics, Candle Making, Sublimation, Phone Repair & DIY (Pink)

  • ▶ Variable Speed & Heat: Our heat gun has dual temperature and speed settings - low speed & heat for delicate or detail work and high speed & heat for heavy duty or high volume work. It’s like having a mini heat gun and a full size heat gun in one!.
  • ▶ Hobby heating gun for crafts: Small craft heat gun for resin, embossing powders, shrink wrap, vinyl wrap, decals, jewelry making, candle making, sublimation tumblers, ceramics, bubble busting, or pair it with a scorch marker for wood burning!.
  • ▶ Multi-purpose: This is more than just a crafting heat torch! Our dual speed variable temp heat gun with shield and wire stand is also great for shrink tubing,vinyl wrap, soldering, wire connectors, phone repair & as a paint dryer or paint scraper..
  • ▶ Insulated - Ergonomic - Light Weight - Quiet: Cheap mini heat guns get too hot to hold. Cordless wireless large gun-style heat guns are too heavy for extended projects. Our pink heat gun for resin is compact, light weight & low-noise..
  • ▶ Proud Global Company - Launched in a small LA loft, our team members and products now span the globe. Our tools are high quality and UL certified. If for any reason you're dissatisfied, contact our customer care team and we'll make things right!.
Check Stock

BOSS Audio Systems Elite BE1200.1D Class D Car Amplifier - 1200 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers

  • ...size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 7.8 x 4.6 x 1.7, Weight: 2.9 lbs..
  • Warranty - BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Heat Gun for Crafts, Mini Dual Temp Hot Air Gun Tool for Epoxy Resin, Shrink Wrapping, Vinyl Wrap, Embossing, Electronics, Candle Making, Sublimation, Phone Repair & DIY (Pink)

  • ▶ Variable Speed & Heat: Our heat gun has dual temperature and speed settings - low speed & heat for delicate or detail work and high speed & heat for heavy duty or high volume work. It’s like having a mini heat gun and a full size heat gun in one!.
  • ▶ Hobby heating gun for crafts: Small craft heat gun for resin, embossing powders, shrink wrap, vinyl wrap, decals, jewelry making, candle making, sublimation tumblers, ceramics, bubble busting, or pair it with a scorch marker for wood burning!.
  • ▶ Multi-purpose: This is more than just a crafting heat torch! Our dual speed variable temp heat gun with shield and wire stand is also great for shrink tubing,vinyl wrap, soldering, wire connectors, phone repair & as a paint dryer or paint scraper..
  • ▶ Insulated - Ergonomic - Light Weight - Quiet: Cheap mini heat guns get too hot to hold. Cordless wireless large gun-style heat guns are too heavy for extended projects. Our pink heat gun for resin is compact, light weight & low-noise..
  • ▶ Proud Global Company - Launched in a small LA loft, our team members and products now span the globe. Our tools are high quality and UL certified. If for any reason you're dissatisfied, contact our customer care team and we'll make things rig....
Check Stock