Top Variable depth Pilot Counterbore

EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

  • 【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
  • 【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
  • 【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
  • 【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
  • 【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..
Check Stock

Koopi 4.5 Hole Saw with Heavy Duty Arbor 38mm Depth Bi-Metal 4 1/2 inch Hole Cutter for Easily Drilling Wood Plastic Plywood Drywall Thin Metal 114mm

  • 【Sturdy body construction】-- The thicker wall of the 4.5 inch hole saw is made of M42 High Speed Steel and BI-Metal, improves durability and....
  • 【Fast & Clean Cutting】 -- Variable Tooth Design and High quality material enhances hole cutter performance - Cuts precise 4.5in holes smoothly in....
  • 【Come with Arbor】 -- The 4-1/2 hole saw comes with a heavy duty 7/16” hex shank quick change locking-pin mandrel and a BONUS replacement pilot....
  • 【Deep Cut Style】 -- Cutting depth of 38 mm (1.5"), will cut more material in 1 pass.
  • 【12 MOUTHS GUARANTEE】-- With our unbeatable 12 mouths warranty and 30 day 100% Satisfaction Guarantee, buy with confidence! We attach great....
Check Stock

2-1/2\ Diamond Dry Core Bit for Brick and Block with SDS Plus Pilot Bit Adapter, 9.5\ Drilling Depth, 5/8\-11 Arbor

  • CORE DRILLING - diamond core bits are designed for soft brick or building block.
  • PILOT BIT ADAPTER - includes SDS Plus pilot bit adapter to fit SDS Plus core drills.
  • USE WET OR DRY - recommended to use with dedicated core drills or core drill rigs.
Check Stock

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

  • Drill, countersink and counterbore in one step with this drill bit.
  • Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
  • Replacement tapered bits offered for DEWALT drill bits.
  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

DEWALT Router, Variable Speed, Fixed Base, 2-1/4 HP (DW618K) , Yellow

  • 2-1/4 horsepower, 12-amp electronic variable-speed motor provides power to rout smoothly through toughest hardwoods.
  • Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 RPM.
  • Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts vertically.
  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Quick release motor latches for fast and easy motor pack removal for bit and base changes.
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

50 Variable Depth Economy Kraft LP Record Mailer Boxes

  • 50 - 12.5" x 12.5" x .5" or 1" variable depth mailer boxes.
  • Variable depth: scored at .5" and 1" to make your required height.
  • Securely holds 1-4 albums or other items.
  • Non-test kraft mailers made from recycled material.
Check Stock

Trend Snappy 6.35mm x 12.7mm TCT Counterbore - to recess screws for plugging

  • 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial sizes..
  • Used in conjunction with the Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters, fixings can be hidden with an almost invisible plug for a high quality, professional finish..
  • 6.35mm diameter drill allows for clearance for thicker screw shanks and to ensure accurate, consistent alignment..
  • Drill depth can be altered to suit material thickness and is easily replaceable if it becomes damaged..
  • TCT cutting faces can be resharpened ensuring a long lifespan and assured performance in all timbers and abrasive timber based materials including ply, MDF and chipboard..
Check Stock

6-1/2" Dry/Wet Multipurpose Core Bit for Masonry, Concrete and Natural Stone, 6" Drilling Depth, 1/2" Shank Pilot Bit with 5/8"-11 Arbor

  • DRY DRILLING - designed for brick, block, pavers or natural stones with Moh's hardness below 4.
  • WET DRILLING - designed for concrete (non-reinforced) or natural stones with Moh's hardness below 7.
  • PILOT BIT ADAPTER - includes 1/2" chuck pilot bit adapter.
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock