Top Ventilation Ducts

Suncourt Flush Fit Register Air Booster Fan - HC500-B - Brown - 2 Pack

  • In-line duct fan solves air delivery problems without major system Rework or expense.
  • Applications include boosting airflow to rooms that are too hot or too cold and general ventilation of clean indoor air.
  • Designed to fit flexible and rigid ducts.
Check Stock

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

  • Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
  • Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
  • FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
Check Stock

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

  • Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
  • Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
  • Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
  • The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....
Check Stock

Broan ERVS100S Broan ERVS100S 105 CFM Energy Recovery Ventilator with Side Ports

  • QUIET, BALANCED VENTILATION: WhisperComfort cleans air and exchanges heat between incoming and outgoing exhaust air, all while operating so quietly that you might not know it's on..
  • LONG LIFE, GUARANTEED: Panasonic ventilation fans use less energy to move larger volumes of air. Less energy leads to less overheating and motor failure, saving you on repair costs. Included 3-year limited warranty..
  • CLEAN AIR AND SAVE ENERGY: Capillary Core cleans air as it exchanges heat between incoming and outgoing exhaust air. Filters are easy-to-remove and clean. Thermal fuse protection feature is available.
  • EASY-TO-INSTALL: Designed for 4" ducts, WhisperComfort includes necessary mounting hardware and is easy-to-install..
  • CODE COMPLIANT: This product is ENERGY STAR certified and complies with ASHRAE 62.2, LEED, and Washington VIAQ codes and standards..
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

Replacement Filter Pads for Renewaire ERV EV130 / BR130-4 Pack of 10-1/2 inch x 10-1/2 inch

  • QUIET, BALANCED VENTILATION: WhisperComfort cleans air and exchanges heat between incoming and outgoing exhaust air, all while operating so quietly that you might not know it's on..
  • LONG LIFE, GUARANTEED: Panasonic ventilation fans use less energy to move larger volumes of air. Less energy leads to less overheating and motor failure, saving you on repair costs. Included 3-year limited warranty..
  • CLEAN AIR AND SAVE ENERGY: Capillary Core cleans air as it exchanges heat between incoming and outgoing exhaust air. Filters are easy-to-remove and clean. Thermal fuse protection feature is available.
  • EASY-TO-INSTALL: Designed for 4" ducts, WhisperComfort includes necessary mounting hardware and is easy-to-install..
  • CODE COMPLIANT: This product is ENERGY STAR certified and complies with ASHRAE 62.2, LEED, and Washington VIAQ codes and standards..
Check Stock

AGV Unisex-Adult Full Face K-5S Hurricane 2.0 Motorcycle Helmet Red Small

  • Fiberglass and carbon fiber composite outer shell.
  • Two outer shells and four EPS sizes for the most accurate fit.
  • Dimensions of outer shell and EPS optimized using FEM (Finite Element Method) analysis.
  • IVS (Integrated Ventilation System) with wide ducts hollowed into the EPS shell optimized in wind tunnel testing.
  • Central front air intake recessed in outer shell profile with a high-capacity direct duct.
Check Stock

(12) Pack - Renewaire Compatible Replacement Filter Pads ERV EV130 / BR130-10-1/2" x 10-1/2" x 1"

  • QUIET, BALANCED VENTILATION: WhisperComfort cleans air and exchanges heat between incoming and outgoing exhaust air, all while operating so quietly that you might not know it's on..
  • LONG LIFE, GUARANTEED: Panasonic ventilation fans use less energy to move larger volumes of air. Less energy leads to less overheating and motor failure, saving you on repair costs. Included 3-year limited warranty..
  • CLEAN AIR AND SAVE ENERGY: Capillary Core cleans air as it exchanges heat between incoming and outgoing exhaust air. Filters are easy-to-remove and clean. Thermal fuse protection feature is available.
  • EASY-TO-INSTALL: Designed for 4" ducts, WhisperComfort includes necessary mounting hardware and is easy-to-install..
  • CODE COMPLIANT: This product is ENERGY STAR certified and complies with ASHRAE 62.2, LEED, and Washington VIAQ codes and standards..
Check Stock

TerraBloom 6\ Air Duct - 25 FT Long, Aluminum Flexible Ducting with 2 Clamps, 3 Layer HVAC Ventilation Air Hose - Great For Grow Tents, Dryers, AC Vents

  • 6" by 25 FEET DUCT: This a value size ducting which is 25 feet long when fully extended. Plenty of length to run an air line to remote HVAC registers, build an intake and exaust ventilation inside your grow room or any other air circulation needs.
  • 3-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. This ducting is built with a layer of Heat Reflective Fire-Retardant Aluminum, Covered with PET for additional endurance and Steel Wire Helix to preserve the Ducts shape.
  • FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze.
  • 6" DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 25 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
  • VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other ap....
Check Stock

10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings

  • D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
  • ________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
  • __________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....
Check Stock

AGV Unisex-Adult Full Face K-5S Hurricane 2.0 Motorcycle Helmet (Silver, Medium/Large)

  • Fiberglass and carbon fiber composite outer shell.
  • Two outer shells and four EPS sizes for the most accurate fit.
  • Dimensions of outer shell and EPS optimized using FEM (Finite Element Method) analysis.
  • IVS (Integrated Ventilation System) with wide ducts hollowed into the EPS shell optimized in wind tunnel testing.
  • Central front air intake recessed in outer shell profile with a high-capacity direct duct.
Check Stock

AGV Unisex-Adult Full Face K-5S Hurricane 2.0 Motorcycle Helmet Green Medium/Small

  • Fiberglass and carbon fiber composite outer shell.
  • Two outer shells and four EPS sizes for the most accurate fit.
  • Dimensions of outer shell and EPS optimized using FEM (Finite Element Method) analysis.
  • IVS (Integrated Ventilation System) with wide ducts hollowed into the EPS shell optimized in wind tunnel testing.
  • Central front air intake recessed in outer shell profile with a high-capacity direct duct.
Check Stock