Top Ventilation Fittings

Eccotemp FVI12-LP Liquid Propane Gas Tankless Water Heaters, White

  • Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver..
  • For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment..
  • Easy to read digital temperature display, on a compact and space-saving design with minimal noise output..
  • plugs into standard 120v electrical outlet with UL-listed cord..
  • Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate.
Check Stock

Trail Crest Men's Blaze Orange Safety Deluxe Front Loader Vest, 4X

  • LIGHTWEIGHT AND DURABLE: 55% Cotton - 45% Polyester with mesh lining for ventilation.
  • MULTIPLE CUSTOM POCKETS: Two front cargo pockets with flaps and 28 concealed shell loops for handy storage.
  • LIGHT AND COMFORTABLE: With quilted shoulder shooter's patch for added comfort.
  • REAR GAME BAG: Large WATERPROOF/BLOODPROOF game bag with zipper and snaps on sides for added extention. It can alternatively be used a pull down waterproof seat for wet, swampy ground..
  • BACK TAG HOLDER FITTINGS: Vest includes two grommet holes in the center back keep hunter's license tag properly displayed..
Check Stock

Eccotemp fvi12-NG FVI-12 Natural Gas, 3.5 GPM, High Capacity Tankless Water Heater, White

  • Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver..
  • For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment..
  • Easy to read digital temperature display, on a compact and space-saving design with minimal noise output..
  • plugs into standard 120v electrical outlet with UL-listed cord..
  • Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls..
Check Stock

2532-20 M12 Pro PEX Expander Tool with 1/2 in. - 1 in. RAPID SEAL Pro PEX Expander Heads

  • Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver..
  • For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment..
  • Easy to read digital temperature display, on a compact and space-saving design with minimal noise output..
  • plugs into standard 120v electrical outlet with UL-listed cord..
  • Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Beaded Pull Chain Extension,Each Chain Length 39 Inch (1 Meter) with Two Additional Matching Connectors,3.2 mm Diameter Beaded,Silvery,4 pack

  • 1：3.2 mm Diameter Beaded Pull Chain Extension with Connector,The standard chain segments for on common fans and light fittings ..
  • 2：Used for Lighting & Fans, Ceiling Fans & Ventilation,Replacement for broken or outdated pull chain..
  • 3：They were easy to cut with scissors and assemble to their little bead thingies. Also Perfect for dog tags, bottle cap pendant necklaces, scrabble tile pendant necklaces, and many other uses..
  • 4：Pack of 4, 4 x 39 inch pull chain extension (1 Meter) .Use connector to form handle or extend chain..
Check Stock

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 8 feet) with 1 X 8 in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTu....
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

4 Inch Metal Tee Cap - Round Vent Cover - Indoor and Outdoor Pipe Cover - Dryer Vent Cover - Dryer Duct End Cap - 4In Metal End Cap - Metal Plug 4Inch - Round Metal Duct Cap

  • The cap is used at the end of tubing as a cover to fit over pipe fittings.
  • Manufactured from high quality galvanized metal.
  • Easy and fast installation - just push the cap in the pipe.
Check Stock

Scepter 08590 Neptune Portable 3 Gallon Marine Fuel Tank For Outboard Engine Boats, 17-Inches x 11-Inches, x 8-1/2-Inches, Red

  • EASY TO TRANSPORT – Portable 3-gallon marine fuel tank with dual molded top handles easily transports from dock to small fishing boats, dinghy’s, and other small vessels.
  • COMPACT DESIGN – Molded-in feet keep tank off floor for increased ventilation and stability while slim profile makes for convenient under-seat storage.
  • 2-WAY VENTED CAP – Automatic air inflow valve system allows air to enter tank during operation and pressure to be released above 5 PSI.
  • DURABLE CONSTRUCTION – Crush-resistant design made of UV-stabilized, rust and corrosion-resistant HDPE for maximum durability.
  • CONVENIENT CONNECTION: Accepts standard 1/4 NPT marine tank fittings for easy fuel line connections.
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock