Top Vertical Turret Lathe

BestEquip Metal Lathe, 8\ x 16\ Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, Mini Lathe with 3-Jaw Chuck, Bench Top Metal Lathe, for Various Types of Metal Turning

• ...s more possibilities for large size or/and heavy workpieces..
• Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8" max tool size)..
• Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included..
• Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8" (54mm), cross slide 3" (76mm)..

Mini Vertical Slide (90 x 50 mm) for instant Milling Operation on Lathe Machine

• TOOL POST MINI VERTICAL SLIDE -EASY & QUICK CLAMPING.
• Quality Lathe Milling Vertical Slide Bed Size 90 mm Length x 50 mm Width Small Vertical Mi.
• Small Vertical Milling Slide for Bench Small Lathes Can be fitted to Emco, Myford, Warco, Sieg C3 Small Lathes with little modification/ machining.

22 FIRE 4-12x40 AO Extended Focus Range T-Plex Dot Rimfire Rifle Scope

• Features an adjustable objective providing an Extended Focus range allowing the scope to focus from 10 meters to infinity.
• The T-Plex Dot reticle features a fine crosshair with a .25" Dot (at 50 yards) allowing precise placement of the reticle on typical competitive rimfire targets.
• Hand Turn windage and elevation adjustments with precise, repeatable and audible 1/4" clicks at 50 yards are easily reset to zero without any tools.
• TRACT'S Fully Multi-Coated (FMC) optical system applies multiple layers of anti-reflective compounds to every air to glass surface to provide extremely high light transmission with bright, clear images even in low light.
• SPRING LOADED RESET TO ZERO - Simply lift the turret, turn to line up the zero with the vertical indicator, release and the turret springs back into place.

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

• Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
• This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
• No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
• No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
• Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....

Fletcher General Purpose Glass Cutting Wheel Metal Tube / 10

• SUPERIOR CUTTING ABILITY: This professional glass scorer has a 3-position cutting turret featuring a glass-cutting wheel unit, plastic scoring blade, and mat/foam-board cutting blade. Purchase package includes (10) glass scoring wheels, (10) acrylic scoring blades and (10) cutting blades..
• A MULTIPURPOSE CUTTER: Tackle the big projects with this innovative cutting machine that handles material sheets up to 48” in height and mounts on a wall or freestanding installation..
• UNLIKE ANYTHING ON THE MARKET: A Fletcher innovation, the turret makes changing between materials easy, while a ramping feature lifts the scoring wheel on the top edge of glass for a clean edge break. Application tip for glass, the lighter the score the better the breakout of glass..
• DESIGNED FOR PROFESSIONALS: With a 48-inch vertical cutting capacity and patented lever clamping system that holds material in place, this shop cutter ups your productivity, efficiency, and accuracy..
• FLETCHER TOOLS: We're the leading manufacturer of quality tabletop and wall-mounted cutters because we love helping businesses grow and thrive with professional design tools they can count on..

Vortex Optics Razor HD Gen II 3-18x50 First Focal Plane Riflescope - EBR-7C Reticle (MRAD)

• The Razor HD Gen II 3-18x50 is perfect for precision shooting and tactical operations. The L-TEC turret System has a locking mechanism preventing accidental adjustments. A visual rotation indicator allows Shooters to Track of revolutions on the turret..
• Ebr-7c is made for long-range competition shooting/hunting. A wind age tree in the lower quadrants is for fast wind/elevation corrections. Numbers on the lower stadia have moved outside the wind age dots for less obstruction around the vertical stadia..
• A 6x zoom range offers magnification versatility while the fast focus Eyepiece adjusts the reticle into sharp focus. Side Parallax adjustment and illumination controls have been integrated into one knob for easy access and streamlined performance..
• The APO optical System delivers stunning image quality through premium, high Density, extra-low dispersion glass. All lenses are fully multi-coated with XR plus anti-reflective coatings to increase light transmission for amazing brightness..
• O-ring sealed and argon purged, the Razor delivers waterproof and fog proof performance while the single-piece, aircraft-grade aluminum construction gives shooters a durable platform. Armored coatings protect the lenses from scratches, oil, and dirt..

RCBS Turret Press

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

• Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
• Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
• Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
• Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
• One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

• 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
• 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
• 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
• 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
• 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
• The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

• Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
• High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
• Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
• Easy To Use: High precision, high hardness, highly efficient.wood lathe.
• Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..

New Replacement Belt for Asian Mini Lathe w/Model # Grizzly 33685 G8688

• for use with 7x10 Harbor Freight Mini Lathe, 03911 Homier 7x12 Mini Lathe, 33684 Harbor Freight 7x10 Mini Lathe, 5278 Cummins 7x12 Mini Lathe, 82500 Micro-Mark 7x12 Mini Lathe, 82710 Micro-Mark 7x14 Mini Lathe, G8688 Grizzly 7x12 Mini Lathe.

Portal 2 Level Pack - LEGO Dimensions

• Help Chell escape the Aperture Science Test Labs with this Portal 2 Level Pack, featuring a buildable Chell minifigure, portal gun, and 2 rebuildable....
• Unlocks the exclusive Portal 2 “A Portal 2 Adventure” level.
• Rebuild the Companion Cube into a Laser Deflector and Gold Heart Emitter.
• Rebuild the Sentry Turret into a Turret Striker and Flying Turret Carrier.
• Sentry Turret measures over 2 Inch (7cm) high, 1 Inch (4cm) wide and 1 Inch (5cm) deep, Companion Cube measures over 1 Inch (5cm) high, 1 Inch (5cm)....