Top Via Motherboard

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Thermaltake Toughpower PF1 ARGB 1200W 80+ Platinum 16.8 Million Colors 18 Addressable LEDs 5V Motherboard Sync/Analog Controlled SLI Full Modular Power Supply PS-TPD-1200F3FAPU-1

  • [2-Way RGB control] - Control light via "color" "Mode" Button (7 light modes/8 Colors) or via 5V ARGB Sync motherboard.
  • [15 light modes via color mode button] - Wave/ spiral/ flow/ heartbeat/ ripple/ full lighted (Red, orange, yellow, green, blue, purple, pink, and white)/ spectrum mode/ light off.
  • [Sync with motherboard RGB software] - controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome through motherboards that have a 5V addressable RGB header.
  • [Ring Duo 140mm fan] - 16.8 million color 18 addressable LEDs Dual lighting Zones self-lubricated hydraulic Bearing pwn fan for maximizing airflow while minimizing noise.
  • [Ultra quiet smart zero fan] - fan works only when PSU working load goes over 40%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [Zero cable platform] - daughterboards are directly soldered to the Motherboard for better heat dissipation and impressive output power quality.
  • [Japanese capacitors] - 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
  • [80+ platinum and Intel C6/C7 States ready] - deliver up to 92% efficiency, PF1 ARGB Series optimized to work with all generations of Intel's processors t....
Check Stock

Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 l....
Check Stock

Thermaltake View 51 Snow Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M6WN-00, White

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 lbs 3 Year....
Check Stock

Thermaltake V250 Motherboard Sync ARGB ATX Mid-Tower Chassis with 3 120mm 5V Addressable RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1Q5-00M1WN-00

  • [LIGHT UP THE SYSTEM] – 3 Pre-installed 120 millimeter 5V Motherboard Sync ARGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] – Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] – Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
  • [CLEAR VIEW OF PC GAMING] – 4 millimeter thick Tempered Glass Side panel with standard mounting.
  • [FULL LENGTH PSU COVER] – Providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU.
Check Stock

Thermaltake View 71 Motherboard Sync ARGB 4-Sided Tempered Glass Vertical GPU Modular E-ATX Gaming Full Tower Computer Case with 3 140mm 5V Motherboard Sync ARGB Fans Pre-installed CA-1I7-00F1WN-03

  • [Light up the system] - 3 pre installed 140 millimeter 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI).
  • [Built-in dual mode 5V ARGB switch board] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.Material:SPCC.
  • [27 LED modes via I/O port] - Wave mode/ flow mode/ RGB lighting (single color)/ Radar mode (Red, yellow, green, cyan, blue, White, Purple)/ breath....
  • [Sync with motherboard RGB software] - Controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome....
  • [Psu cover] – Special ventilated design enhances airflow and hides unsightly cables.
Check Stock

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

  • NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
  • Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
  • Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
  • Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
  • High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check Stock

EZDIY-FAB NVME M.2 Aluminum Heatsink 12V 4 Pin RGB Cooler for 2280 M2 SSD Heat Sink Tri-Cool with Silicone Thermal Pad

  • Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
  • Triangular Aluminum fin design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
  • Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO, etc..
  • Advancing thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD.
  • Sync RGB lighting via motherboard:- ONLY works with an RGB(+12V, 4-pin) capable motherboard or an RGB(+12V, 4-pin) controller(Please check the 12V RGB motherboard of your motherboard before purchase!).
Check Stock

upHere 5V 6-Pack 120mm Silent PWM Intelligent Control 5V Addressable RGB Fan Motherboard Sync Adjustable Colorful Fans with Controller T7SYC7-6

  • Customizable ARGB LED Lighting:With 8pcs of independently programmable ARGB LED lights, provides full lighting for your build, achieving magical....
  • Optimized Cooling Performance:Balanced airflow and air pressure designed for perfect compatibility with your case or cooler..
  • Blade Design:The unique blade configuration offers a powerful air pressure.Scientific air channel design in the frame reduces noise caused by airflow....
  • PWM Control:The PWM function allows the motherboard to run the fan precisely at its necessary speed. This assures the required cooling and minimises....
  • Synchronizable ARGB lighting via motherboard: Sync ready with all 5V 3PIN ARGB motherboard including Gigabytes, MSI, and Asrock.What You Get: T7SYC7-6....
Check Stock

CPU Cooler, 120mm Addressable RGB PWM Fan with 4 Copper Heatpipes, GAMEMAX GAMMA-500-RAINBOW

  • ❄【Effective Dissipating】HDT copper sintered powder heatpipes makes sure high-efficiency heat conducts, 2.5mm fin pitch high penetrability tower heatsink dissipates heat with low speed & noise fan..
  • ❄【RGB Light With Style】Synchronized RGB aluminum housing and fan provide amazing lighting visuals. Rainbow 3pin connector for adapter Controller or SYNC with AURA of motherboard. Software Control via Controller or SYNC with Motherboard..
  • ❄【Friendly Installation】125X125X25mm PWM LED silent fan detachable when cleaning need. Simple and Friendly installation in Intel and AMD system without moving the motherboard..
  • ❄【Wide Application】 Intel/AMD TDP 187W CPU. LGA775/LGA1155/LGA1150/LGA1156/LGA1151/LGA115x. Socket 754/939/940/AM2/AM2+/AM3/AM3+/FM1/FM2/AM4..
  • ❄【After-Sale Service】The 36-month worry-free product experience process will be provided to you and the manufacturer will bear all the responsibility if any product problems happen..
Check Stock

SHANGZHAOYUAN B250 BTC-12P Mining Motherboard (Intel 6th/7th Gen) LGA 1151 Motherboard with 12 PCIe Slots, VGA+DVI, MSATA, 2*DDR4, USB 3.0 for Miner (BTC/ETH/ZEC/ETC)

  • 【Superb Configuration】The Intel LGA1151 6th/7th Motherboard using Intel B250 high-speed chipset, and has stabilized capacitors that can provide a stable voltage for your electrical equipment.
  • ⚡【High Performance】The Mining motherboard 12 GPU is equipped with 2 DDR4 2133/2400/2800/3000 MHZ memory slots, up to 32GB maximum capacity. Support LGA 1151 series 6th/7th generation processors.
  • 【Mine Motherboard】Up to 12 GPUs can be connected via 12 PCI-E interfaces, maximizing your mining connectivity and speed. The B250C BTC Motherboard allows you to fire up your mining efforts.
  • ⚡【High efficiency】Fast startup, loading and file transfer. Effectively reduce interface interference and line loss to ensure data reliability, thus improving efficiency..
  • 【Exclusive for Mining】Quiet, low power consumption, low heat generation, energy-saving, safe and reliable, effectively helping to mine Bitcoin (BTC), Ether (ETC) and any other cryptocurrencies.
Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

  • VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
  • SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
  • BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
  • THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
  • IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..
Check Stock