Top Vibration resistant Oil Pressure Switch

uxcell 30 x 20mm M8 Thread Female Rubber Mounts,Vibration Isolators,Replaces Anti Vibration Pads Flat Silentblock Base Block

  • Product Size: Neoprene Foam Anti Vibration Pads are 6 inx 6 in Square Pieces, 1/8 in Thickness.
  • Item Packaging Quantity: 8-Pieces Black Neoprene Foam Anti Vibration Pads, Rubber Padding with Adhesive Backing..
  • Product Material: Top chloroprene rubber with a tensile strength of 50 PSI, which is better than the products on the market, and has a pressure sensitive adhesive on one side. The Pads is made of industrial-grade rubber, which can withstand the test of time and has a heavy load-bearing capacity. The thick and sturdy backing plate has good shock absorption ability and can reduce noise well..
  • Application: Rubber Insulation Anti-Vibration Pads have Strong adhesive backing, waterproof and non-degumming, stick firmly,Weather proof, Oil resistance, resistant to corrosion, dust proof, shock-absorbing, sound and heat insulation, anti-skidding and insulating. The Pads are Suitable for noise insulation, padding, Expansion joints of precast concrete and steel..
  • Note For Use: Neoprene Foam Anti Vibration Pads are designed to absorb vibration, cutting down on noise and preventing movement. The rubber pads are easy to cut into different shapes and sizes for any application - just use scissors or a razor to trim to a perfect fit..
Check Stock

12V DC fresh water pump 60W diaphragm pump self-priming spray pump, with speed switch and filter, with pressure switch 4.5L/min 1.2GPM 100PSI, suitable for RV camper boat lawn garden

  • Complete accessories, with everything you need, including: water pump speed switch, filter, hose clamp, interface nut.
  • 12V/5A DC water pump, 4.5 L/Min (1.2 GPM) water flow, when connected to the speed switch, water pump switch control and water flow adjustment can be realized, providing stable flow in all operating ranges, while consuming low current(Load 1.8-3A).
  • Inlet and outlet: pipe thread connection, 3/8 inch hose barb port, vertical suction force of 6.6 feet (2m). The pump has a self-priming function to prevent liquid from flowing back. The pump can be installed above the water tank. Do not immerse the pump in water..
  • With built-in pressure protection switch, automatically cut off the pressure, the maximum pressure is 100PSI (7BAR). It can automatically stop protection when overpressure, and automatically restart when the pressure is lower than the threshold.
  • Durable soft rubber feet can provide good vibration cushioning and reduce noise. High performance, corrosion resistance, good sealing, long service life, widely used in RV camper, water taps in the boat, household water supply, caravan, lawn and garden sprinkler, spray device, cleaning equipment.
Check Stock

mistcooling 250 PSI Misting Pump

  • ...e – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on....
Check Stock

RioRand PWM DC Motor Speed Controller Switch Control 7-70V 30A Fuse

  • Wide voltage input 7-70V, maximum output current 30A .Adjustable potentiometer soft cable（about 15CM） can be separated, with running stop brake function.
  • Can be use on long hours of work: Circuit optimization design, stable Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses.
  • Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • PWM Frequency and Share Space: 12KHZ ,The knob has a switch function, which can control the motor speed from 0% to 100%..
Check Stock

Transmission Pressure Switch 28600-RCL-004 Auto Trans Oil Pressure Switch Replacement Fits for Honda Accord/CR-V

  • Applicable Model: This transmission oil pressure switch fit for ACURA RSX/TSX, for HONDA ACCORD/CR-V /ELEMENT, which is a practical and useful....
  • Replacing OEM numbers for reference: 28600-RCL-004. Built to meet standard specification, strictly follow factory quality control..
  • Durable Material: Transmission Pressure Switch is made of high quality aluminum and ABS materials, rustproof, wear resistant, acid and alkali....
  • Easy Installation: Transmission Pressure Switch is simple to install, no need complicated tools. Direct replacement for the old or broken one..
  • What you need to know: Please confirm the package before ordering to ensure it is completely suitable, and then rest assured to buy and our....
Check Stock

Jobs USA Search

  • ...fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In order to avoid improper installation of the product can not be used normally, professional installation is strongly recommended. If have any problem with this item, you can contact us, we will solve your problem within 24 hours..
Check Stock

WIKA 8642885 General Purpose Pressure Transmitter, 4 - 20mA 2-Wire Signal Output, Stainless Steel Wetted Parts, 0-10 psi Range, 0.25% Accuracy, 1/2\ Male NPT Connection

  • Highly resistant to pressure spikes and vibration.
  • Can be assembled to diaphragm seals for special applications.
  • Applicable for hydraulics and pneumatics, test equipment, pump and compressor control.
  • Internal transmission fluid: synthetic oil.
  • 58 psi maximum pressure and 1000 psi burst pressure.
Check Stock

WIKA 8342275 General Purpose Pressure Transmitter, 4 - 20mA 2-Wire Signal Output, Stainless Steel Wetted Parts, 0-3000 psi Range, 0.25% Accuracy, 1/2\ Male NPT Connection

  • Highly resistant to pressure spikes and vibration.
  • Can be assembled to diaphragm seals for special applications.
  • Applicable for hydraulics and pneumatics, test equipment, pump and compressor control.
  • Internal transmission fluid: synthetic oil.
  • 7200 psi maximum pressure and 17400 psi burst pressure.
Check Stock

Cool Your Engines (Original Mix)

  • ...fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In order to avoid improper installation of the product can not be used normally, professional installation is strongly recommended. If have any problem with this item, you can contact us, we will solve your problem within 24 hours..
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

Pneumatic Hose 4mm OD 2.5mm ID Polyurethane PU Air Hose Pipe Tube 5 Meter 16.4ft Black

  • Maximum pressure: 1.5 Mpa / 217 psi / 15 bar. Burst pressure: 2.5Mpa (363Psi).
  • Working temperature of tubing: -4°F-176°F (-20°C--80°C).
  • Safe and reliable application areas: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile plants, food plants, fuel delivery pipes for vehicles and ships, vacuum systems, air conditioning systems, automobiles, and hydraulic brake systems , Vibration insulators and other industries..
  • Package content: 1 X pneumatic PU hose (If you have any questions when you receive the product, please contact me, I will definitely give you a satisfactory answer and solution!).
Check Stock