Top Viscosity And Flow Rate

TERAPUMP Tough Built Steel Cast Iron Rotary Manual Hand Circle Action Pump for Diesel Oil Other low to medium NOT water based liquid Media

  • Power Source: Manual Powered Dual directional Operation, Pumps in either direction by a few reverse turns of the handle.
  • Flow Rate: Dispenses 1.3 Gallons per 20 Turns, if the viscosity is the same as Diesel - Easy and smooth action & goose neck discharge spout.
  • Adjustable Bung Adapter: 2-inch Bung Adapter fits 15, 20, 30, 35, 55 Gallon Drums (40-inch Suction Tube) - Simply slide the bung adapter to desired height of the drum barrel.
  • Heavy Duty: Made of industrial strength cast-iron body with precisely machined iron vanes for effective & smooth delivery - Pump inlet threaded 1" - designed for volume discharge of low to medium viscosity media.
  • Applicable Liquids: Flows great with Diesel, Kerosene & Heating Oils - Backed by a 1-Year Manufacturer Warranty of Manufacturer Defects.
Check Stock

Greenworks 24V Cordless Caulk Gun 6-Speed Anti-Dripping with 2Ah Battery and Changer

  • Makita-built motor delivers 1, 100 lbs. Of dispensing force to dispense the highest viscosity adhesives and sealants.
  • 5 setting speed dial optimizes flow rate from 0-66 IPM.
  • Variable speed trigger allows user to match the speed to the application.
  • 360Degree rotatable cartridge holder fits 28-29 oz. Cartridges.
  • Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing.
Check Stock

GLTL Paint-4 Liquid Viscosity Test Tool w/Viscometer Flow Cup Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester with Base

  • ★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
  • --The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
  • ★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..
Check Stock

Ryobi 18-Volt ONE+ Power Caulk Adhesive GunP310G with P163 charger and 2.00Ah battery

  • Makita-built motor delivers 1, 100 lbs. Of dispensing force to dispense the highest viscosity adhesives and sealants.
  • 5 speed dial optimizes flow rate from 0-66 IPM.
  • Variable speed trigger allows user to match speed to the application.
  • 360Degree rotatable cartridge holder fits 10 oz. And 300 ml cartridges.
  • Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing.
Check Stock

Makita XGC01Z 18V LXT Lithium-Ion Cordless 10 oz. Caulk & Adhesive Gun, Tool Only

  • Makita-built motor delivers 1, 100 lbs. Of dispensing force to dispense the highest viscosity adhesives and sealants.
  • 5 speed dial optimizes flow rate from 0-66 IPM.
  • Variable speed trigger allows user to match speed to the application.
  • 360° rotatable cartridge holder fits 20 oz. Cartridges, sausage packs and bulk caulk and adhesives.
  • Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing.
Check Stock

Danville Microetcher IIA Sandblaster, Fully Autoclavable Kit, Contains llA

  • 【High Quality】Made of High quality stainless steel, tungsten steel material. Easy to clean..
  • 【Application】With its own cooling system, cooling using six-point spray, water mist concentration, washable handplate operation, no dust box. Use for increasing viscosity of the touch surface , roughening. The blasting machine uses alumina blasting powder and caulking powder..
  • 【360° Rotating Design】Tungsten steel nozzle, 360° rotating, it can clean hidden parts effectively..
  • 【Sand tank】Sand tank can be used as a container and also as operation handle, leak-proof, hygienic and comfortable..
  • 【Push switch】It can control the flow rate, and the high-sensitivity push switch makes it easy to start and stop..
Check Stock

Makita GC01ZC 12V max CXT Lithium-Ion Cordless 29 oz. Caulk and Adhesive Gun, Tool Only

  • Makita-built motor delivers 1, 100 lbs. Of dispensing force to dispense the highest viscosity adhesives and sealants.
  • 5 speed dial optimizes flow rate from 0-66 IPM.
  • Variable speed trigger allows user to match speed to the application.
  • 360° rotatable cartridge holder fits 28-29 oz..
  • Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing.
Check Stock

uxcell 8mm Dia G1/2 Thermowell Weldless Stainless Steel 304 300mm Length for Beer Fermenter

  • Package included 2pcs stainless steel thermowells (with nylon cable gland)..
  • It has strong rust resistance and thermal conductivity. long lasting..
  • It is made of stainless steel, which is strong, durable and rust-proof..
  • Our thermowells are used in all process systems where pressure, flow rate or viscosity, abrasive and corrosive materials exist alone or together..
  • The threads are clear and deep. A tight fit is effective against water. The thermowell permits removal of the temperature instrument for replacements, repair or testing without effecting the process media or the system..
Check Stock

ZuwaUSA Heavy Duty Drill Powered Pump 1? 16 GPM - Marine Grade Aluminum | Unistar-2001B Drill not included

  • CONNECTION: 1” NPT | Dry self priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for....
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils and....
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
Check Stock

ZuwaUSA Heavy Duty ¾” 16GPM Drill Powered Pump – Marine Grade Aluminum | Unistar-2001B (Drill Not Included)

  • CONNECTION: 3/4” NPT | Dry self priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills..
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
Check Stock

Makita XGC01ZB 18V LXT Lithium-Ion Cordless 20 oz Barrel Style Caulk & Adhesive Gun Tool Only Silver/Blue/Black 20-Ounce

  • Makita-built motor delivers 1, 100 lbs. Of dispensing force to dispense the highest viscosity adhesives and sealants.
  • 5 speed dial optimizes flow rate from 0-66 IPM.
  • Variable speed trigger allows user match speed to the application.
  • 360Degree rotatable cartridge holder fits 20 oz. Cartridges, sausage packs and bulk caulk and adhesives.
  • Includes 3 pistons for use with cartridges, sausage packs and bulk materials.
Check Stock

Huepar Tools SG550 Paint Sprayer, HVLP Electric Spray Gun (1000ml/4 Metal Nozzles/3 Patterns), Easy Spraying and Cleaning, for Home Interior and Exterior Walls, Ceiling, Cabinet, Fence, Chair

  • ...ular and horizontal. Provide a precise spray pattern to create a smooth and superior finish, great for tables, chairs, fences, cabinets car, interior walls, or crafts.（We recommend thinning paint around 100DIN-S, large amount of spraying, higher operation efficiency）.
  • 【Paint Thinning】Please note: The maximum viscosity that this spray gun can spray is: 100din/sec。We recommend thinning paint below 100din/s, large amount of spraying, higher operation efficiency..
  • 【Adjustable Flow Contral and 4 Metal Nozzles】 Huepar Tools SG550 Paint Sprayer own 4 Metal Nozzles (Φ1.0/1.5/2.0/2.5mm). By replacing the appropriate nozzle and adjust the control valve knob to adjust the paint thickness, which is a perfect design to save your money spent on paint by reasonably control paint flow rate. Best spray distance: 100-300mm..
  • 【Easy to Clean】Huepar Tools SG550 electric spray painter adopts a separate design and can be easily assembled without tools. With the included cleaning brush and plug needle, you can unclog any hardened paint left in the machine, ensuring you get the best possible spray every time..
  • 【Upgraded Design】ABS anti-slip rubber is used on the handle of the machine, which makes your work smoother. Double sealing gaskets are used at the j....
Check Stock