Top Viscosity For Hydraulic Oil

GPI - L5116 High Viscosity Oil Pump 16 QPM 115V/230AC Oil Transfer Pump for Viscous Fluids that Features a 0.75” Ball Valve Nozzle 8 Foot Hose 3 Foot Power Cord with Three-Prong Plug 142100-01

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum....
  • HEAVY-DUTY OIL PUMP: The L5116 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other....
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of....
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and....
  • 1-YEAR WARRANTY: Built with high-quality parts, this CSA approved hydraulic oil transfer pump comes with a 1-year manufacturer’s warranty that gives....
Check Stock

AmazonCommercial Air Operated Pneumatic Oil Transfer Pump Heavy Duty Double Action 3:1 3.2GPM / 12LPM for SAE130 Oils/Fluids (NOT for Gasoline or Diesel)

  • Heavy-duty pneumatic (air-operated) 3:1 double-action oil transfer pump for medium- to high-viscosity fluids and short- to medium-distance applications.
  • Provides a high flow rate of up to 3.2GPM (12LPM).
  • suitable for SAE130 oils/fluids, including motor oil, synthetic hydraulic oil, gear oil, hydraulic fluid, and automatic transmission fluid (NOT for use with gasoline or diesel).
  • Air inlet connection of 1/4-inch and oil outlet connection of 3/4-inch male.
  • maximum air inlet pressure of 5-8BAR / 70-115PSI.
  • maximum fluid pressure of 24BAR / 350PSI.
  • Long pumping life of 221k+ gallons (840k L).
  • minimal moving parts in the air motor assembly translate to less downtime and lower repair costs.
  • corrosion-resistant design uses stainless steel, aluminum, and chrome on key components for longer life.
  • 2-inch adjustable bung adapter for easy installation.
  • can be barrel, cart, or wall mounted (wall mount kit or extension tub kit sold separately).
  • backed by an AmazonCommercial 1-year limited warranty.
Check Stock

LUCAS OIL 10827 Brake Fluid12 ounce

  • Specifically engineered for use in bicycle hydraulic disc brakes..
  • Provides maximum fluid life and braking performance, even at low temperatures..
  • Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures..
Check Stock

Sta-Lube Hydraulic & Jack Oil SL2552-32 Fl. Oz, Anti-Foam, Anti-Rust 20W Non-Detergent Oil

  • This item does NOT ship to residential, home business or farm addresses, please scroll down to confirm shipping details prior to purchase..
  • Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear lubricants blended using selected and carefully refined high-quality mineral oils, combined with a multifunctional additive system and available in a wide viscosity range from ISO Grade 32 to 150. This line of oils has been designed to meet the requirements of major hydraulic pump manufacturers, and its applications include hydraulic systems used in industrial and marine applications as well as in mobile machinery..
  • Certifications: ISO 11158-HM, DIN 51524 Part 2, Cincinnati P69, Easton Vickers M-2950-S and I-286-S, Parker-Denision HF-0.
Check Stock

Meyer 15134 Type M-1 Snow Plow Hydraulic Fluid Oil 1 Gallon (Pack of 4 Quarts)

  • Specifically engineered for use in bicycle hydraulic disc brakes..
  • Provides maximum fluid life and braking performance, even at low temperatures..
  • Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures..
Check Stock

RAVENOL J1B1022 Electro-Hydraulic Power Steering Fluid - E-PSF Full Synthetic 1 Liter

  • Please see Product Description regarding the California Proposition 65 Warning.
  • Specially developed German fully synthetic fluid for electro-hydraulic power steering systems on electric vehicles.
  • Provides good lubricating ability, even at low temperatures in winter as well as a high, stable viscosity index. Offers a very low pour point whilst....
  • Excellent protection against wear and tear, corrosion, and foam formation with a fine tuned coefficient of friction.
  • Note: See “Product Information/Technical Details/OEM Part Number” section in this product listing for oil specifications, oil quality standards,....
Check Stock

TRIAX Synthetic OEM Grade Power Steering Fluid, Universal, Arctic Grade -50 Cold Flow, Fits Most Asian, US, and European Cars, Full Synthetic with Esters, Widest Spec Application (1 Quart)

  • Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
  • compatible with all types of seals materials in virtually all power steering systems.
  • universal top off and complete fill formula.
  • the green color mixes with any color power steering fluid.
  • Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
  • Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
  • very high heat tolerances without losing viscosity and properties.
  • contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
  • contains top tier custom built optimized additive pack.
  • protects all metals including servo/power steering pumps from corrosion and rust.
  • ultra-rapid aeration and water separation.
Check Stock

Vehicle Maintenance Log Book: Easy-to-use Vehicle Service and Repair Record Book

  • Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
  • Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
  • Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
  • Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

Interstate Pneumatics YL30-016 Non Detergent Compressor/Pressure Washer Pump Oil 30 Wt. – ISO 100-S (16 oz.)

  • ...Good anti-foam and air release properties ensure smooth operation and system efficiency.
  • Anti-wear protection | Oxidation and corrosion inhibition | Foam and aeration suppression |.
  • Under moderate loads and temperatures, this high viscosity index of Chevron assures good film strength between metal surfaces and is further enhanced by anti-wear additive protection.
Check Stock

Genuine Ford XT-5-QMC MERCON-V Automatic Transmission and Power Steering Fluid - 16 oz.

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • Recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission....
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity....
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock