Top Viscosity Of Brake Fluid

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Phoenix Systems (3006-B) Brake Fluid Test Strip Kit, 100 Test Strips and 100 Rating Cards, BrakeStrip, FASCAR

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Phoenix Systems (3003-B) Brake Fluid Test Strips, 2 Strips Per Package, Reveals Brake Fluid Condition

  • May save you from paying for an un-needed brake fluid exchange..
  • Gives you the peace of mind that your brake fluid is good and is safely performing its proper function..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your safety..
  • Simply remove the test strip from the foil wrapper, dip it into your brake fluid and 60 seconds later you will know the condition of your brake fluid. (scientific proof).
  • Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Replacement For ESI6-32N Bosch Brake Fluid for 318 320 323 325 328 330 525 528 530 535 540 545

  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1.
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1.
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards.
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s.
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years..
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【Professional & Widely Use】This brake fluid extractor automotive is used to empty and fill brake fluid in the cars' brake and clutch equipment, while effectively avoid generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one....
Check Stock

Bosch ESI6-32N Brake Fluid Direct Replacement for DOT 3 DOT 4 and DOT 5.1 - 1 Quart

  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1.
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1.
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards.
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s.
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years..
Check Stock

Castrol SRF Racing Brake Fluid - 1 Liter 12512

  • Avoid fluid contact with brake lining or painted surfaces.
  • Follow vehicle manufacturer's recommendations when adding brake fluid.
  • store brake fluid only in its original container.
Check Stock

Genuine Honda Fluid 08798-9008 DOT 3 Brake Fluid - 12 oz.

  • Avoid fluid contact with brake lining or painted surfaces.
  • Follow vehicle manufacturer's recommendations when adding brake fluid.
  • store brake fluid only in its original container.
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
  • EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
  • 5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
  • EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [WIDE APPLICATION]VICRING Oil extractor pump great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for ....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock