Top Voltage Current

DC Buck Module, DROK Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

  • PARAMETER --- Input voltage range DC 6V-32V.
  • Max output current 5A, recommend use of within 4.5A.
  • Max output power 75W, recommend use of within 50W..
  • GENERAL USE --- As ordinary step-down module with over-current protection.
  • DISPLAY --- Large clear digital LCD display voltage & current value simultaneously..
  • FEATURES --- Constant current/voltage mode.
  • Voltage calibration & current calibration.
  • NOTE --- 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2). The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3). Please carefully read the user’s manual, especially the “Cautions” before using. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF]..
Check Stock

Heitune Voltage Meter, D85-3050 Digital DC Voltmeter Ammeter Volt Amp Meter DC0-199.9V DC0-10.00A

  • The DC voltage and ammeter can display the measured DC voltage and DC current simultaneously on the same meter screen..
  • Wide measurement voltage and current range, DC Voltage: DC0-199.9V.
  • The measured DC voltage and DC current are completely isolated within the meter..
  • Suitable for chargers, inverters, solar energy, wind driven generator, LED light measurement, etc..
Check Stock

uxcell 10Pcs Voltage Dependent Resistors AC 150V 14D241K L8 Radial Lead Disc Varistors

  • Model: 14D241K；Maximum Impulse Current: 4500 A.
  • Maximum continuous working voltage:150 VAC(rms)/V.
  • Maximum continuous working voltage: 200 VDC/V.
  • Maximum limit voltage: 395 VP(8/20μs)/V.
  • Maximum limit voltage and current: 50 IP(8/20μs)/A.
  • Specific epoxy coated disc construction with radial leads, long life use..
Check Stock

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

Programmable 30V/10A DC Power Supply Variable, Adjustable Switching Regulated Power Supply with 4-Digit Large Display Alligator Leads, PC Software, USB Interface for Lab Equipment (30V/10A)

  • ✦Higher Sensitivity & Precision✦ Adjustable 30V 10A DC Power Supply is designed for laboratories, schools and production lines. Its output voltage and output current could be continuously adjusted between zero and nominal value. It can precisely sense the location of voltage and current and make double potentiometer adjustment. Good power stability and ripple coefficient, it can precisely sense the location of voltage and current..
  • ✦High-Quality & Multiple Protections✦ The Power Supply comes with over-voltage, over-current, over-power, over-heat, short-circuit, five powerful protection function. The built-in fan low arc noise & low ripple,prolonging the life of product effectively. In addtion, the power supply variable displays voltage, current and power simultaneously and the keyboard can be locked to avoid misoperation..
  • ✦Constant Voltage & Current Current Operation Mode✦ The easy-to-use rotary knob of coarse and fine could adjust the data of voltage and current digit by digit, which allows you to set the desired output resolution quickly and easily in 30V 5A. It also comes with high-quality pure copper toroidal transformer, intelligent temperature-controlled fan, unique solar heat dissipation function and 4-in-1 power supply, including u....
Check Stock

ZRM&E 0.28 Inch Mini Digital Voltmeter Ammeter DC 0-100V 50A Red Blue Dual LED Display Panel Amp Volt Current Meter 2 In 1 Tester with Current Shunt

  • Type: Voltmeter & Ammeter 2 in 1 Tester, Voltage Measuring Range: DC 0.0V-100V, Current Measuring Range: DC 0-50A.
  • 2 Color LED Dispaly: Adopting three 0.28" LED digital tube, red + blue dual voltage and current display, automatically moving, bright and clear, convenient for you to check the measured result..
  • Function: Can display voltage and current at the same time in such a small size, all-cover shell, safe, reliable and dustproof, with reverse connection protection, high precision, high reliability, for high-end applications..
  • Easy to Use: Come with 2 x cables and 1x 75 milli-ohm Current Shunt, which are easy to connect..
  • Application: Can be widely applied to monitoring voltage of storage battery, mastering voltage state of storage battery, and measuring voltage and current of other devices..
Check Stock

High Voltage DC-DC Boost Converter 8V-32V to 45V-390V Adjustable ZVS Capacitor Charging Power Supply Module

  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input.
  • Output voltage: 45-390V continuously adjustable (the default output 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes).
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current).
Check Stock

High Voltage DC-DC Boost Converter 1.5V-3V to 300V-400V 380V Adjustable Step-up Voltage Booster Power Supply Module

  • 3V DC boost power module, High-voltage sensors, Quiescent current 12mA, Size: 58x17x14mm/2.28x0.66x0.55inch.
  • Input voltage 3V, the output voltage adjustable range of 300V-400V (this circuit is not added voltage regulator circuit, the input voltage decreases the output voltage will drop)..
  • When the high voltage output is connected with a load, the on-board vibrator wiring terminal will have 3V voltage output (also can be connected in series with a LED and dozens of ohms resistanceas an indicator)..
Check Stock

MASTECH MS2108A AC/DC Clamp Meter Multimeter Voltmeter Resistance Ohm 4000 counts

  • Perform measurements of inrush current, AC / DC voltage and current, resistance, frequency, duty cycle, capacitance, continuity and diode test..
Check Stock

EBC-A40L Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Dischage Capacity Tester, 0-5V Fe Battery Cyclic Tester

  • 【Product Parameters】 Voltage range: 0-5V voltage, accuracy: 0.2%+-0.003V, current range: 0.1-40A (maximum charging current 40A), current accuracy: 0.2%+0.01A, discharge mode: CC/CP, Discharge termination: time/cutoff voltage/manual, discharge power: 200W Max, charging method: CV constant current and constant voltage charging, charge termination: cutoff current/manual, heat dissipation: fan, power supply: AC110V..
  • 【Practical Tester】EBC-A40L is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power supply discharge test, charging head power performance test, supports connecting to a computer, and realizes more extended functions through online software..
  • 【Automatic Test】The charging method is standard charging, and supports nickel-metal hydride, nickel-chromium, lithium, iron-lithium, and lead-acid. Support automatic charge-discharge-charge mode to test battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【Excellent Performance】This EBC-A40L battery capacity tester is designed for high current charge and discharge within 5V, it supports a maximum charge current of 40A and discharge of 40A. It can be connected with a com....
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock