Top Voltage Measure

HiLetgo 2pcs 0.56' Digital Voltmeter Ammeter DC 100V 10A Amp Voltage Current Meter Tester 0.56 Inch 3 Bits Blue + Red Dual LED Display Panel with Connect Wires

  • 0.56" Digital Voltmeter Ammeter DC 100V 10A Blue + Red Dual LED Display.
  • 10A Amp Voltage Current Meter Tester with 3 Bits Blue + Red Dual LED Display.
Check Stock

Klein Tools CL320KIT HVAC Kit for HVAC Testing; Digital Clamp Meter, Non-Contact Voltage Tester, and Infrared/Probe Thermometer

  • HVAC Kit with testers for the HVAC Professiol: HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight.
  • Cat. No. CL320 HVAC Clamp Meter with TRMS technology measures AC current, NCVT, AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, continuity, and temperature.
  • Cat. No. IR07 Dual IR Probe and Thermometer measures temperature from -40 to 572 Degrees Fahrenheit (-40 to 300 Degrees Celsius).
  • measure surface temperature with Infrared Thermometer (DS ratio 8:1).
  • Measure air vents and duct temperature using temperature probe with hands-free hanging hook.
  • calculate differential temperature (T1-T2) for both IR and probe temperatures.
  • Cat. No. NCVT3P is dual-range and detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
Check Stock

ANENG Digital Clamp Meter Multimeter Tester 4000 Counts with NCV Amp Ohm Volt Meter Measures AC Current AC/DC Voltage,Capacitance Resistance Diodes Continuity Frequency Backlight Electrican Tools

  • 【Quickly detect values and troubleshoot】The clamp meter can measure only for AC current (not for DC current), AC and DC voltage, resistance,....
  • 【Double Open Clamp】The maximum wire diameter that the multimeter can measure is 1.42 inches without interrupting the circuit. Double open jaws....
  • 【NCV Defection Function】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.The NCV non-contact AC....
  • 【Easily Carrying & Durable】The voltage tester where it can handle the demands of a long workday, from the durable exterior to the wide range of....
  • 【We’ve Got You Covered】Note: Make sure press “REL”to zero out the meter before clamping.The package of capacitor tester included....
Check Stock

Rockville RFC50F v2 50 Farad Car Audio Capacitor w/Blue Voltage Display

  • Rockville RFC50F 50 Farad Capacitor Blue Voltage Display. ESR (Equivalent Series Resistance): 0. 015 ohm @ 120Hz, 25°C. 50 Farad Digital Hybrid Capacitor with Blue Illumination.
  • Blue illuminated window with light that blinks to the beat of the music. Black wire mesh cover. Warning tones for reverse polarity connection.
  • 3-Digit, super bright LED voltage meter. Automatic sleep status when volume is low. Operating Voltage: 10 - 16V DC.
  • Surge Voltage: 20V DC. Voltage measure accurate to +/- 0. 1VDC. Capacitance tolerance: +/- 10%.
  • Over-voltage protection circuit automatically alarms when the voltage above 17. 5V or under 10V. Unit dimensions (Inches): 10. 91” L x 6. 38” W x 2. 56” H..
Check Stock

KAIWEETS HT206B Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)

  • True-RMS clamp meter: This voltage meter can accurately measure AC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month produc....
Check Stock

Wireless Bluetooth Clamp Meter, INFURIDER YF-7200APP 6000 Counts Auto-Ranging Digital Voltmeter Ammeter Measures DC AC Volt Amp Ohm Clamp on Multimeter with Capacitance,Temp,Diode Tester

  • 【True RMS Clamp Meter】This ac dc clamp multimeter can accurately measure AC/DC Voltage,AC/DC current(60A/400A) has resolution up to 0.01A.Also can provide resistance,capacitance,temperature,diode,continuity,frequency(Hz) and duty cycle measurement..
  • 【Bluetooth Voltmeter Ammeter】YF-7200APP clamp meter can be easily and automatically connected to your Android/IOS.Convenient viewing of voltage amperage ohm readings on a smartphone or tablet via AiLink app(within 15m).Moreover, you can download files or charts to monitor,log and analyze..
  • 【Easy to Use】Press the [HOLD] button over 2 seconds to turn on LCD backlight screen and brightness flashlight.It’s possible to read and record the value easily in darkness.The volt amp meter feature with data hold,low battery indication.Compact and portable design make the amperage meter easy to carry and use..
  • 【NCV Function】Our clamp on multimeter with non contact voltage function,can detection effectively check electrical status through measuring without touching any wires.Light and sound alarm if detects AC voltage 90-1000V or live wire.Easy to use for troubleshooting your....
Check Stock

NOYAFA NF-826 Underground Cable Tester Locator Circuit Tracer Metal Pipe Detector Wire Tracker Tool Detects Wall\Underground Wires, Cables, Water and Gas Pipeline Paths

  • 1. underground wire locator- Detect breaks and short circuits of underground cables and wires buried in walls or deep, built-in flashlight function, can also work in dark environments, adjustable sensitivity.
  • 2. wire finder – detects fuses and distributes current circuits, traces sockets and junction boxes covered in plaster3. wire tracer electrical- The detector has built-in AC/DC voltmeter function, which can linearly measure 12 to 400V AC/DC voltage.
  • 3. wire tracer electrical- The detector has built-in AC/DC voltmeter function, which can linearly measure 12 to 400V AC/DC voltage.
  • 4. underground cable locator – detects installed metal water pipes and metal heating pipes, both transmitter and receiver display power level, code, battery, detected voltage type and value, and high voltage alarm.
  • 5. NF-826 is widely used in communication cable construction, power cable construction, building pipeline construction, communication cable, power supply line and electric heating line maintenance, it is an indispensable tool for maintenance personnel and familiess.
Check Stock

Digital Multimeter RQ-770S,TRMS 6000 Counts Auto-Ranging Voltmeter Fast Accurately Measures Voltage Current Resistance Diodes Continuity Duty-Cycle Capacitance Temperature hFE with NCV Function

  • Multi-function multimeter: The RQ-770S multimeter can accurately measure AC/DC voltage to 1000V DC or 750VAC, current to 20A, and resistance to 60MΩ. Can be used to measure DC and AC voltage, DC and AC current, resistance, capacitors, frequency, duty cycle, temperature, transistor hFE, non-contact AC voltage (NCV) detection, positive diode voltage drop and audible continuity..
  • Non-Contact – Completely safe non-contact voltage testing with audible and visual alarms. You can detect AC voltage without using test leads. Using the NCV function, the NCV green LED light will be on: when the live voltage is ≥90V AC rms, the NCV red LED light and green LED light will alternately light up and make a sound.
  • Easy to Use- Switch the dial to the function you need, and inserting leads is easy. The autoranging feature saves you the trouble of which value range to use. Adopt 6000-digit LCD display, character height 25mm, clear reading.
  • Safety first – Complies with IEC-1010 overvoltage category CAT III 1000V and pollution 2 for electronic measuring instruments, and is equipped with 800mA/250V fast fuse for protection of temperature testing and current measurement circuits up to 600mA, with 20A /250V fuse for protection of 20A range, silicone sleeve to prevent drop....
Check Stock

Micsig DP10007 High Voltage Differential Probe Kit, Oscilloscope Probe Kit, 100MHZ 700V

  • 【Maximum differential test voltage】 Comes with 70V-700V measurement range, you can safely measure up to 700V floating voltage and up to 100 MHz bandwidth..
  • 【High voltage conversion】The testing probe kit can convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
  • 【Safer to use】High-impedance isolation between the sampling input and output of the high-voltage differential probe to protect personal safety..
  • 【Multifunctional kit】All 6 pieces come with three different connectors, which are helpful for various tests on different occasions..
  • 【Wide application】The attenuation rate is 10X/100X, which is widely used in most of oscilloscope..
Check Stock

SKYXIU Digital Tablet Oscilloscope,with 2 Channel Handheld Multifunction Oscilloscope,100Mhz Bandwidth,1GSa/s Sampling Rate 7\ TFT LCD Touch Screen(1013D Plus)

  • ...citive touch panel. Touch sampling rate is similar to tablet PC, touch sensitive..
  • 【PROFESSIONAL DESIGN】This 2 channel oscilloscope with100 MHz analog bandwidth @ 1 GSa/s Real-time sampling,240kbit Sample memory depth..
  • 【INTELLIGENT ANTI-BURN】This portable oscilloscope with Intelligent anti-burn,Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.Built-in 6000mAh high-performance lithium battery,can be used continuously for 4 hours after fully charged.(Note：Before use,please read the manual attached to the product. If you have any questions,you can contact us.).
  • 【MULTIFUNCTION OSCILLOSCOPE】This lab oscilloscopes with powerful waveform picture manager supports thumbnail browsing,viewing,detailed viewing,page turning,deletion and waveform zoom in,zoom out,move,etc.Equipped with a USB interface,it can be connected to a computer to share screenshots with the computer, which is convenient for secondary analysis..
  • 【MEASUREMENT RANGE】This tablet oscilloscope has High measurement voltage range,1X can measure 0 ~ 40 V,10X can measure 0 ~ 400Vm,100X can measure 0 ~ 4000V.Up to 12 parameters measurement：VPP，VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty,Duty-Time,Time-,Period..
Check Stock

Universal Microwave Diode Compatible for GE WB27X10597 Whirlpool W10492276 and Others 2 PCS

  • Production Name: Microwave High Voltage Diode, Withstand Voltage: 12 KV, Rated Current:450 mA,O Terminal Diameter: 4.2mm/0.17in, Female Terminal....
  • Compatible and directly replace GE WB27X10597 Whirlpool W10492276 high voltage diode for microwave.
  • Heat shrink tubing on female side and keep safe for ever,widely use for microwave.
  • Replace high voltage diode which marked T4512, 4512,CL4512, CL04-12.
  • Please use an analog multimeter with 9 V DC battery to measure the diode's polarity, because its gate voltage is more than 3V DC (which most digital....
Check Stock

KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts Multimeter Voltage Tester Auto-ranging Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle AC/DC Current

  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Mo....
Check Stock