Top Voltage Reference Isolators

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

Dual Battery Isolator Kit 12V 140Amp, Voltage Sensitive Relay VSR,Compatible with RV Marine Car Vehicles Truck Caravan Off-road Camper Yacht，Not Fit for lithium batteries

  • 【Wide Compatibility】——This battery isolators are small and suitable for almost anywhere, for ATV, UTV, Boats, RV's，marine vehicle, truck, caravan.
  • 【Working Voltage】——Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to run your vehicle.
  • 【Function】——With the engine running the VSR will engage when the starting battery reaches 13.3 Volts and the LED light will illuminate. This means that both batteries are now linked and the system is working.Once you turn off your vehicle the system will disengage the two batteries as it reaches 12.8 Volts,leaving your main battery safe to start again.
  • 【Important Note】——When connecting accessories to your second battery ensure they are fused within 0.98FT.
  • 【12-MONTH Warranty】——We have exquisite craft, strict quality control along with excellent after-sales service. That is why our products are worthy of your purchase.
Check Stock

Topping HS01 USB 2.0 High Speed Audio Isolator Compatible with PCM32bit 768kHz DSD512 withstands up to 1kVRMS

  • Leading innovation - Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of....
  • USB2.0 High Speed - HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz....
  • Low latency - The latency is only 0.29us, which fully meets hifi and professional applications' needs. Note: Generally, the latency of USB device is....
  • Galvanic Isolation - This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage....
  • Precautions - When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note....
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

5KW 6KW AVR Automatic Voltage Regulator Rectifier for Gasoline Generator W/Carbon Brush Honda GX390

  • Stop fluctuation of voltage, automatically maintaining generator output terminal voltage at a set value.
  • Prevent generator from suffering damages of voltage fluctuation or over load..
  • It uses an electromechanical mechanism, or passive or active electronic components..
  • According to the design, which is used to manage one or more AC or DC voltage..
  • In addition to the shunt regulator, the regulator operates through a number of fixed internal comparison of the actual output voltage of the reference voltage..
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock

Xprite UTV Side View Mirrors Aluminium w/ LED Spot Lights Smoke Lens Compatible with 1.5'-2' Roll Cage Bar for Pioneer Polaris RZR, Side by Side, Can Am X3, Kawasaki Teryx Mule, Yamaha Rhino Wolverine

  • FEATURES - Xprite Heavy- duat UTV Side Rear Viewer Mirror with Mount, Aluminum Alloy Housing designed to withstand the most extreme punishment with Integrated LED Lighting to increase visibility..
  • HIGH QUALITY - Weather Sealed Caps Designed to keep out debris and Rubber Vibration Isolators for keeping a clear image and the mirrors from sliding.
  • EASY INSTALLATION - With Position Tension Adjustment Bolts for keeping your mirror in place at just the right angle and Adjustable Steel Brackets that fits 1.5" to 2" Rollbars..
  • LIGHT SPECS - Number of LEDs: 9 x 5W Bulbs.
  • Lumens: 4500lm, Lifespan: Over 50,000 Hours.
  • PRODUCT INCLUDES - 1 x Pair of Side Mirrors (Left & Right), 1 x Wiring Harness with Relay, Fuse, and Rocker Switch, All Necessary Hardware. Our Mirrors are compatible with a full size windshield.
Check Stock

Oster A6 Cool Comfort Heavy Duty Pet Grooming Clippers with Detachable CryogenX #10 Blade, 3 Speed, Aqua Sky (078006-000-000),Black,1.75 x 1.88 x 6.90 inches

  • Versatile pet hair clippers offer one-touch controls and 3 speeds: high (up to 4,400 SPM), medium (3,600 SPM), and low (3,100 SPM).
  • Heavy-duty precision-calibrated motor provides an ultra-smooth, efficient cutting experience.
  • Vibration isolators help absorb excess vibration and noise for all-day grooming comfort.
  • Soft-grip material helps reduce hand fatigue and heat during prolonged use.
  • compatible with all Oster A5 detachable blades and guide combs.
  • Vibration Isolators centered around the motor help absorb excess vibration and noise, for all-day grooming comfort.
  • 3 speed settings: Hi - 4,400+ SPM, Medium - 3,600 SPM, Low - 3,100 SPM.
  • Compatible with all Oster A5 detachable blades and guide combs.
  • Pig-tail extension cable takes only one outlet spot, removing the frustration of oversized electric plugs.
  • Precision calibrated motor designed for ultra smooth, efficient cutting experience.
  • This model fits standard US 120V outlets.
Check Stock

labwork 2 pcs High Power Ice Blue 3156 3157 15SMD Reverse Backup DRL Lights LED Bulbs

  • common use for :/ Reverse / Backup Light, Turn Signal Light, side marker light, Parking light, ect.
  • Cross Reference: 3157 3156 T25 3057A 3357NA 3456 4156 3047 3057 3155 3357 3454 3457 4057 4157 ……(For Reference Only).
Check Stock

Aero-Lites.com #327 LED Replacement Bulb | 28V AC/DC | Dimmable | Replaces #327, #376 , #387, #6034, #729, #727, S3368-2, AN3140-327, MS25237-327

  • 【Features】Direct drop-in LED replacement bulb for 28-Volt midget flanged-base filament bulbs. Positive/Negative ground compatible.
  • dims with forward voltage changes (reduce voltage lights dims ~ increase voltage light brightens).
  • 【Bulb Cross Reference】 Replaces filament bulbs #327, #376 , #387, #6034, #729, #727, S3368-2, AN3140-327, MS25237-327.
  • Lamp Shape: T1-3/4 Base Style: Midget Flange.
Check Stock

RuiLing 20-Pack Rectifier Diode SR5100 SB5100 DO-27 MIC 100V 5A Silicone Schottky Barrier Rectifier Diode

  • Repetitive Reverse Voltage Vrrm Max: 100 Volt.
  • Widely used as a voltage reference and shunt regulator to regulate the voltage of small circuits..
  • Widely used in automotive electronics,wireless products,computer products,smart grid,radio,audio,television maintenance etc..
Check Stock